This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.51.1.1 since 5.51.1
================
5.51.1.1:C01
It is not longer necessary to restart the video encoder when changing between
SFP and RJ45.
Known Bugs/Limitations
================
5.51.1.1:L01
Zoom is shown on live view page when using java applet as default viewer, even
though it is not supported.
5.51.1.1:L02
Recording streams to SD Card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.
5.51.1.1:L03
90 and 270 rotation can cause a drop in frame rate.
5.51.1.1:L04
Multiple simultaneous recordings to SD cards and network shares can degrade the
performance of the system.
5.51.1.1:L05
Windows Network Shares do not handle all modifiers e.g. %c, since modifiers are
UNIX standard.
5.51.1.1:L06
When Guard Tour is active, it is not possible to use PTZ controls with Viewer
access rights.
5.51.1.1:L07
If the device has ongoing continuous recordings and the device is restarted
using the restart option in web interface, the current part of recordings(block)
can not be accessed or downloaded through the web interface.
5.51.1.1:L08
Stream profile names are limited to alphanumerical characters.
5.51.1.1:L09
Recordings made with firmware earlier than 5.20 will not be readable on the SD
Card from firmware 5.40 and onward. Backup important recordings and reformat the
SD Card after the firmware upgrade.
5.51.1.1:L10
Check and repair is only available if the file system is ext4.
5.51.1.1:L11
The AXIS Media Control client may stop displaying the H.264 video stream after
the PC has been locked.
5.51.1.1:L12
Live view does not work with QuickTime player using default settings.
Workaround: Disable Direct3D acceleration in Quicktime.
5.51.1.1:L13
When using an action rule results in short recordings, it is recommended to
extend post-event time.
5.51.1.1:L14
To avoid corrupt recordings, it is recommended to unmount the SD Card before
ejecting it.
5.51.1.1:L15
For actions based on PTZ events, it is not possible to use the #P (PTZ preset
name) and #p (PTZ preset number) modifiers in the file names for network share
uploads.
5.51.1.1:L16
Downgrading from 5.50.x to a 5.40.x firmware version will cause an AVHS/O3C
connection to drop. Do not downgrade an AVHS/O3C connected camera unless you can
do a factory reset locally on the camera.
5.51.1.1:L17
It's not recommended to downgrade to previous firmware when having HTTPS
enabled.
5.51.1.1:L18
Video overlay text size is a global setting and can not be set for each stream
profile.
5.51.1.1:L19
If text overlay is more than 460 characters long, no text will be displayed
5.51.1.1:L20
Private keys need to be in a PKCS#1 format in order to function.
5.51.1.1:L21
The resolutions of the pre-defined profiles have changed. Quality, Balanced and
Bandwidth uses default resolution, which is equal to the highest available
resolution. Mobile uses the lowest resolution.
5.51.1.1:L22
If downgrading to previous firmware version, a factory default is recommended
after performing the downgrade.
5.51.1.1:L23
For network share passwords, the character comma (,) is not allowed.
5.51.1.1:L24
Not possible to view live or recorded video in Internet Explorer 10 Modern UI in
Microsoft Windows 8.
5.51.1.1:L25
Extented Driver Specific settings are missing under PTZ, Advanced, Device
settings. Parameters are available in plain configuration.
5.51.1.1:L26
Using Java applet as a viewer, the button Zoom Wide does not zoom out fully.
5.51.1.1:L27
Unclear error message when uploading audio clip with already existing name.
5.51.1.1:L28
Occasionally, G711 audio can lag when using Java applet.
5.51.1.1:L29
When using action rules, network trigger does not work.
Supported AXIS VAPIX API Image Resolutions for AXIS P7216
================
Corrections in 5.51.1.1 since 5.51.1
================
5.51.1.1:C01
It is not longer necessary to restart the video encoder when changing between
SFP and RJ45.
Known Bugs/Limitations
================
5.51.1.1:L01
Zoom is shown on live view page when using java applet as default viewer, even
though it is not supported.
5.51.1.1:L02
Recording streams to SD Card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.
5.51.1.1:L03
90 and 270 rotation can cause a drop in frame rate.
5.51.1.1:L04
Multiple simultaneous recordings to SD cards and network shares can degrade the
performance of the system.
5.51.1.1:L05
Windows Network Shares do not handle all modifiers e.g. %c, since modifiers are
UNIX standard.
5.51.1.1:L06
When Guard Tour is active, it is not possible to use PTZ controls with Viewer
access rights.
5.51.1.1:L07
If the device has ongoing continuous recordings and the device is restarted
using the restart option in web interface, the current part of recordings(block)
can not be accessed or downloaded through the web interface.
5.51.1.1:L08
Stream profile names are limited to alphanumerical characters.
5.51.1.1:L09
Recordings made with firmware earlier than 5.20 will not be readable on the SD
Card from firmware 5.40 and onward. Backup important recordings and reformat the
SD Card after the firmware upgrade.
5.51.1.1:L10
Check and repair is only available if the file system is ext4.
5.51.1.1:L11
The AXIS Media Control client may stop displaying the H.264 video stream after
the PC has been locked.
5.51.1.1:L12
Live view does not work with QuickTime player using default settings.
Workaround: Disable Direct3D acceleration in Quicktime.
5.51.1.1:L13
When using an action rule results in short recordings, it is recommended to
extend post-event time.
5.51.1.1:L14
To avoid corrupt recordings, it is recommended to unmount the SD Card before
ejecting it.
5.51.1.1:L15
For actions based on PTZ events, it is not possible to use the #P (PTZ preset
name) and #p (PTZ preset number) modifiers in the file names for network share
uploads.
5.51.1.1:L16
Downgrading from 5.50.x to a 5.40.x firmware version will cause an AVHS/O3C
connection to drop. Do not downgrade an AVHS/O3C connected camera unless you can
do a factory reset locally on the camera.
5.51.1.1:L17
It's not recommended to downgrade to previous firmware when having HTTPS
enabled.
5.51.1.1:L18
Video overlay text size is a global setting and can not be set for each stream
profile.
5.51.1.1:L19
If text overlay is more than 460 characters long, no text will be displayed
5.51.1.1:L20
Private keys need to be in a PKCS#1 format in order to function.
5.51.1.1:L21
The resolutions of the pre-defined profiles have changed. Quality, Balanced and
Bandwidth uses default resolution, which is equal to the highest available
resolution. Mobile uses the lowest resolution.
5.51.1.1:L22
If downgrading to previous firmware version, a factory default is recommended
after performing the downgrade.
5.51.1.1:L23
For network share passwords, the character comma (,) is not allowed.
5.51.1.1:L24
Not possible to view live or recorded video in Internet Explorer 10 Modern UI in
Microsoft Windows 8.
5.51.1.1:L25
Extented Driver Specific settings are missing under PTZ, Advanced, Device
settings. Parameters are available in plain configuration.
5.51.1.1:L26
Using Java applet as a viewer, the button Zoom Wide does not zoom out fully.
5.51.1.1:L27
Unclear error message when uploading audio clip with already existing name.
5.51.1.1:L28
Occasionally, G711 audio can lag when using Java applet.
5.51.1.1:L29
When using action rules, network trigger does not work.
Supported AXIS VAPIX API Image Resolutions for AXIS P7216
================