This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 6.50.1 since 6.10.1.4
=====================================
6.50.1:F1
AXIS VMD 4 is preinstalled.
6.50.1:F2
OpenSSL version updated to 1.0.2j.
6.50.1:F3
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.
6.50.1:F4
Added support for ONVIF standardised I/O events.
6.50.1:F5
Corrected behavior for conditional triggers.
6.50.1:F6
Improved handling for networks with small MTU values.
6.50.1:F7
Support for ONVIF Profile G.
Corrections in 6.50.1 since 6.10.1.4
====================================
6.50.1:C1
Improved performance when triggerdata enabled in plain config and when no motion
windows have been created.
6.50.1:C2
Improved overall camera stability when handling unstable network environments or
streaming clients.
6.50.1:C3
Improvements in session ID handling for rtsp streaming. Useful when streaming in
some video clients.
6.50.1:C4
Added correction for mounting Network share via IPv6 link local.
6.50.1:C5
Added link local IPV6 support for NTP.
6.50.1:C6
Added correction for connecting to NTP when IPv6 has been enabled.
6.50.1:C7
Fixed Security vulnerability CVE-2016-5195.
6.50.1:C8
Improved response performance of GetCompatibleVideoEncoderConfigurations.
6.50.1:C9
Corrected image corruption issue seen in corridor format.
6.50.1:C10
Switch to turn off the network traffic LED now works.
6.50.1:C11
Fixed script error when naming a privacy mask with åäö.
6.50.1:C12
Added ACAP support for NV12 format.
6.50.1:C13
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.
6.50.1:C14
Fixed security vulnerability CVE-2015-7547.
6.50.1:C15
Fixed issues with stopped events for manual triggered recording.
6.50.1:C16
Date format now displayed correctly in ACM.
New features in 6.50.1 since 6.10.1.4
=====================================
6.50.1:F1
AXIS VMD 4 is preinstalled.
6.50.1:F2
OpenSSL version updated to 1.0.2j.
6.50.1:F3
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.
6.50.1:F4
Added support for ONVIF standardised I/O events.
6.50.1:F5
Corrected behavior for conditional triggers.
6.50.1:F6
Improved handling for networks with small MTU values.
6.50.1:F7
Support for ONVIF Profile G.
Corrections in 6.50.1 since 6.10.1.4
====================================
6.50.1:C1
Improved performance when triggerdata enabled in plain config and when no motion
windows have been created.
6.50.1:C2
Improved overall camera stability when handling unstable network environments or
streaming clients.
6.50.1:C3
Improvements in session ID handling for rtsp streaming. Useful when streaming in
some video clients.
6.50.1:C4
Added correction for mounting Network share via IPv6 link local.
6.50.1:C5
Added link local IPV6 support for NTP.
6.50.1:C6
Added correction for connecting to NTP when IPv6 has been enabled.
6.50.1:C7
Fixed Security vulnerability CVE-2016-5195.
6.50.1:C8
Improved response performance of GetCompatibleVideoEncoderConfigurations.
6.50.1:C9
Corrected image corruption issue seen in corridor format.
6.50.1:C10
Switch to turn off the network traffic LED now works.
6.50.1:C11
Fixed script error when naming a privacy mask with åäö.
6.50.1:C12
Added ACAP support for NV12 format.
6.50.1:C13
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.
6.50.1:C14
Fixed security vulnerability CVE-2015-7547.
6.50.1:C15
Fixed issues with stopped events for manual triggered recording.
6.50.1:C16
Date format now displayed correctly in ACM.