This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New Features/Functionality
================
5.40.3:F1 Events can now be triggered based on a temperature sensor.
5.40.3:F2 Events can now be triggered based on "Network lost".
Corrections since 5.40.3.1
================
5.40.3:C29780 Fixed a connection problem with the AVHS client that could
lead to infinite reconnect loop and criticials in the system log.
5.40.3:C32251 AVHS proxy should now work.
5.40.3:C33336 Fixed a performance problem with AVHS when using HTTPS.
5.40.3:C30984 Mute setting for Audio input gain is now working.
5.40.3:C31728 Administrators other than root can now configure ACAP
applications.
5.40.3:C32489 Fixed a problem with RTP tunneled over RTSP and HTTP that could
lead to terminated RTP sessions because of corrupt payload data.
5.40.3:C32529 Fixed a problem with UPnP NAT traversal that lead to NAT
traversal not working with several router brands.
5.40.3:C33232 Modifier #t for event notifications should now work as expected.
5.40.3:C33439 Fixed a problem with scheduled events not triggering at correct
time.
5.40.3:C33603 Fixed a problem with AVHS "always" register method.
5.40.3:C33603 Fixed a problem with the VAPIX I/O interface.
5.40.3:C33307 Fixed a problem with apps/focusd restarting and generating
critical log messages.
Known Bug/Limitations
================
5.40.3:L18122 Removing and reinserting SD card during recording is not
recommendable.
5.40.3:L10049 With audio enabled, the initial connection latency is increased.
5.40.3:L24316 Check and repair is only available if the file system is ext4.
5.40.3:L29580 A combination of a high bandwidth continuous recording and a lot
of small recordings can result in disc full. The automatic clean up will stop
at that point and the user has to manually remove recordings.
5.40.3:L28297 If you set max gain to a low value, e.g. 0, the IR cut filter
may not switch back on automatically.
5.40.3:L27901 Using modifiers like %c in a network share upload event does not
work.
5.40.3:L29056 Local recording playback fails when using Motion JPEG + audio
with resolution 2048x1536 and higher. Use H.264 instead.
5.40.3:L27653 Multiple simultaneous recordings to SD cards and network shares
can degrade the performance of the system.
5.40.3:L24975 90 and 270 rotation can cause a drop in frame rate.
New Features/Functionality
================
5.40.3:F1 Events can now be triggered based on a temperature sensor.
5.40.3:F2 Events can now be triggered based on "Network lost".
Corrections since 5.40.3.1
================
5.40.3:C29780 Fixed a connection problem with the AVHS client that could
lead to infinite reconnect loop and criticials in the system log.
5.40.3:C32251 AVHS proxy should now work.
5.40.3:C33336 Fixed a performance problem with AVHS when using HTTPS.
5.40.3:C30984 Mute setting for Audio input gain is now working.
5.40.3:C31728 Administrators other than root can now configure ACAP
applications.
5.40.3:C32489 Fixed a problem with RTP tunneled over RTSP and HTTP that could
lead to terminated RTP sessions because of corrupt payload data.
5.40.3:C32529 Fixed a problem with UPnP NAT traversal that lead to NAT
traversal not working with several router brands.
5.40.3:C33232 Modifier #t for event notifications should now work as expected.
5.40.3:C33439 Fixed a problem with scheduled events not triggering at correct
time.
5.40.3:C33603 Fixed a problem with AVHS "always" register method.
5.40.3:C33603 Fixed a problem with the VAPIX I/O interface.
5.40.3:C33307 Fixed a problem with apps/focusd restarting and generating
critical log messages.
Known Bug/Limitations
================
5.40.3:L18122 Removing and reinserting SD card during recording is not
recommendable.
5.40.3:L10049 With audio enabled, the initial connection latency is increased.
5.40.3:L24316 Check and repair is only available if the file system is ext4.
5.40.3:L29580 A combination of a high bandwidth continuous recording and a lot
of small recordings can result in disc full. The automatic clean up will stop
at that point and the user has to manually remove recordings.
5.40.3:L28297 If you set max gain to a low value, e.g. 0, the IR cut filter
may not switch back on automatically.
5.40.3:L27901 Using modifiers like %c in a network share upload event does not
work.
5.40.3:L29056 Local recording playback fails when using Motion JPEG + audio
with resolution 2048x1536 and higher. Use H.264 instead.
5.40.3:L27653 Multiple simultaneous recordings to SD cards and network shares
can degrade the performance of the system.
5.40.3:L24975 90 and 270 rotation can cause a drop in frame rate.
