This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 7.30.1 since 7.20.1
================================================================================
7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.
7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.
7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.
7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.
7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.
7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.
7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.
7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit
It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.
7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.
7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.
Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.
7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.
7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.
7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.
7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.
7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.
7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.
7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration
7.10.1:F2
OpenSSL version updated to 1.0.2j.
7.10.1:F3
VMD upgraded to version 4.1.
7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.
7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.
Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean
Corrections in 7.30.1 since 7.20.1
================================================================================
7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.
7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.
7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.
7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.
7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.
7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.
7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.
7.30.1:C11
Corrected security vulnerability CVE-2016-2147.
7.30.1:C12
Corrected critical vulnerability ACV-120444.
Corrections in 7.20.1
================================================================================
7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.
7.20.1:C2
Apache web server has been updated to version 2.4.25.
7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.
7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.
7.20.1:C6
Fixed critical vulnerability ACV-116267.
7.20.1:C7
Improved camera stability when recording via ONVIF profile G.
7.10.1:C1
Improved camera stability when TriggerData is used.
7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.
7.10.1:C4
Fixed security vulnerability CVE-2015-7547.
7.10.1:C5
Optimized Network Share polling frequency.
7.10.1:C6
Improved stability in actionengine (tcp notification).
7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.
7.10.1:C8
Improved handling of day and night shift levels adjustment.
7.10.1:C9
Improved HTTP image upload stability in unstable networks.
7.10.1:C10
Improved camera stability when metadata is used.
7.10.1:C11
Improved loading of the web-interface in unstable networks.
New features in 7.30.1 since 7.20.1
================================================================================
7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.
7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.
7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.
7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.
7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.
7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.
7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.
7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit
It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.
7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.
7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.
Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.
7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.
7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.
7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.
7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http://
cgi/com/ptz.cgi?query=auxiliary.
7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.
7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.
7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration
7.10.1:F2
OpenSSL version updated to 1.0.2j.
7.10.1:F3
VMD upgraded to version 4.1.
7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.
7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.
Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean
Corrections in 7.30.1 since 7.20.1
================================================================================
7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.
7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.
7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.
7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.
7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.
7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.
7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.
7.30.1:C11
Corrected security vulnerability CVE-2016-2147.
7.30.1:C12
Corrected critical vulnerability ACV-120444.
Corrections in 7.20.1
================================================================================
7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.
7.20.1:C2
Apache web server has been updated to version 2.4.25.
7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.
7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.
7.20.1:C6
Fixed critical vulnerability ACV-116267.
7.20.1:C7
Improved camera stability when recording via ONVIF profile G.
7.10.1:C1
Improved camera stability when TriggerData is used.
7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.
7.10.1:C4
Fixed security vulnerability CVE-2015-7547.
7.10.1:C5
Optimized Network Share polling frequency.
7.10.1:C6
Improved stability in actionengine (tcp notification).
7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.
7.10.1:C8
Improved handling of day and night shift levels adjustment.
7.10.1:C9
Improved HTTP image upload stability in unstable networks.
7.10.1:C10
Improved camera stability when metadata is used.
7.10.1:C11
Improved loading of the web-interface in unstable networks.