This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 7.20.1 since 7.10.1
======================================================================
7.20.1:F1
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.
7.20.1:F2
Changed the default web server authentication from Basic & Digest to Digest
only.
7.20.1:F3
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.
7.20.1:F4
Apache web server has been updated to version 2.4.25.
7.20.1:F5
Support for 24bit LPCM audio mode.
7.20.1:F6
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
7.20.1:F7
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.
7.20.1:F8
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.
7.20.1:F9
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.
7.20.1:F10
The Axis Media Control (AMC) is not longer embedded in the product and needs to
be downloaded separately on https://www.axis.com/global/en/support/downloads
/axis-media-control if needed. The Java Applet has been removed as well.
7.20.1:F11
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.
New features in 7.10.1 since 6.50.1
======================================================================
7.10.1:F1
Our ONVIF implementation have been improved by adding
GetVideoEncoderConfigurationOptions extension. This makes it possible for an
ONVIF client to get the bitrate range.
7.10.1:F2
It is now possible to specify image rotation via ONVIF video source
configuration
7.10.1:F3
VMD upgraded to version 4.1.
7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.
7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.
Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean
Corrections in 7.20.1 since 7.10.1
=====================================================================
7.20.1:C1
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
7.20.1:C2
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.
7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.
7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
7.20.1:C5
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.
7.20.1:C6
Fixed critical vulnerability ACV-116267.
7.20.1:C7
Improved camera stability when recording via ONVIF profile G.
Corrections in 7.10.1 since 6.50.1
=====================================================================
7.10.1:C1
Corrected handling of #D text overlay, it's no longer needed to specify the
camera source.
7.10.1:C2
Improved handling of day and night shift levels adjustment.
7.10.1:C3
Improved HTTP image upload stability in unstable networks.
7.10.1:C4
Improved camera stability when metadata is used.
7.10.1:C5
Correct PTZ status is shown when pressing the PTZ test button.
7.10.1:C6
Improved loading of the web-interface in unstable networks.
7.10.1:C7
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
7.10.1:C8
Improved camera stability when TriggerData is used.
7.10.1:C9
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
7.10.1:C10
Improved stability in actionengine (tcp notification).
New features in 7.20.1 since 7.10.1
======================================================================
7.20.1:F1
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.
7.20.1:F2
Changed the default web server authentication from Basic & Digest to Digest
only.
7.20.1:F3
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.
7.20.1:F4
Apache web server has been updated to version 2.4.25.
7.20.1:F5
Support for 24bit LPCM audio mode.
7.20.1:F6
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
7.20.1:F7
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http://
cgi/com/ptz.cgi?query=auxiliary.
7.20.1:F8
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.
7.20.1:F9
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.
7.20.1:F10
The Axis Media Control (AMC) is not longer embedded in the product and needs to
be downloaded separately on https://www.axis.com/global/en/support/downloads
/axis-media-control if needed. The Java Applet has been removed as well.
7.20.1:F11
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.
New features in 7.10.1 since 6.50.1
======================================================================
7.10.1:F1
Our ONVIF implementation have been improved by adding
GetVideoEncoderConfigurationOptions extension. This makes it possible for an
ONVIF client to get the bitrate range.
7.10.1:F2
It is now possible to specify image rotation via ONVIF video source
configuration
7.10.1:F3
VMD upgraded to version 4.1.
7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.
7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.
Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean
Corrections in 7.20.1 since 7.10.1
=====================================================================
7.20.1:C1
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
7.20.1:C2
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.
7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.
7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
7.20.1:C5
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.
7.20.1:C6
Fixed critical vulnerability ACV-116267.
7.20.1:C7
Improved camera stability when recording via ONVIF profile G.
Corrections in 7.10.1 since 6.50.1
=====================================================================
7.10.1:C1
Corrected handling of #D text overlay, it's no longer needed to specify the
camera source.
7.10.1:C2
Improved handling of day and night shift levels adjustment.
7.10.1:C3
Improved HTTP image upload stability in unstable networks.
7.10.1:C4
Improved camera stability when metadata is used.
7.10.1:C5
Correct PTZ status is shown when pressing the PTZ test button.
7.10.1:C6
Improved loading of the web-interface in unstable networks.
7.10.1:C7
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
7.10.1:C8
Improved camera stability when TriggerData is used.
7.10.1:C9
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
7.10.1:C10
Improved stability in actionengine (tcp notification).