AXIS P1377, version 9.60.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added possibility to copy action rules, schedules and recipients.

9.60.1:F4
Updated Video Motion Detection to version 4.4.3.

9.60.1:F5
Added NTP synchronization status to VAPIX Time API.


Features in 9.50.1
================================================================================

9.50.1:F1
Added support for setting image frequency in action rules.

9.50.1:F2
Updated Apache to version 2.4.41 to increase overall minimum cyber
security level.

9.50.1:F3
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber
security level.

9.50.1:F4
Updated Video Motion Detection to version 4.4.2.

9.50.1:F5
Added possibility to disable the web UI to increase overall minimum
cyber security level.The web UI can be disabled under System -> PlainConfig ->
System -> System WebInterface Disabled. To enable the web UI after it has been
disabled, the VAPIX parameterSystem.WebInterfaceDisabled must be set to "no".

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip
action rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the browser
to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose
to select this option prior to performing an firmware upgrade. When chosen,
the product will perform the upgrade and then wait a pre-defined time for the
user to acknowledge the upgrade in the web-interface. If not acknowledged in
time, the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware.
The password of the root user must be set first in order to initialize VAPIX
and ONVIF interfaces to allow further configuration. This change only affects
products in its factory defaulted state, products that are already deployed in
production systems are not affected by this update untilfactory defaulted. For
more information please seehttps://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-
interface under Settings -> System -> Security in order to allow the Axis product
to accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Added support for millisecond timestamps in JPEG header.

9.30.1:F1
Added an API for mDNS-SD.

9.30.1:F2
TLS1.0 and TLS1.1 is now disabled by default.

9.30.1:F3
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.The following parameters need to be configured prior to
initiating a videostream via
SSM:Network.RTP.R#.VideoAddressNetwork.RTP.R#.VideoPortNetwork.RTP.R#.AudioAdressNetwork.RTP.R#.AudioPort

9.30.1:F4
Added support for TLSv1.3.

9.30.1:F5
The classic GUI has been deprecated and is now removed to increase overall
cyber security level.

9.30.1:F6
Upgraded Apache to version 2.4.39 to increase overall minimum cyber
security level.

9.30.1:F7
Updated Video Motion Detection to version 4.3.5.

9.30.1:F8
It is now possible to upload .PFX formatted certificates with a total size
of102400 bytes. The previous limit was 1/10 of it.

9.30.1:F9
Added support for "Wait at least time x" before re-running an configured
action rule.

9.20.1:F1
Firmware is now signed by AXIS to increase overall minimum cybersecurity
level. More information about Signed Firmware can be found
here https://www.axis.com/support/faq/FAQ116424.

9.20.1:F2
Added Video Streaming Indicator in web interface.

9.20.1:F3
Added support for dynamic power allocation via Link Layer Discovery
Protocol (LLDP) in addition to PoE-class based power allocation. This allows the
switchto allocate less power to the camera and potentially a greater number of
PoEdevices can be connected to the switch. LLDP can be enabled in Settings ->
System -> PlainConfig -> Network -> LLDP POE-> LLDP Send Max PoE.

9.20.1:F4
Upgraded Apache to version 2.4.38 to increase overall minimum cyber
security level.

9.20.1:F5
Updated Video Motion Detection to version 4.3.4.

9.20.1:F6
Added support for signed ACAP applications.

9.20.1:F7
Updated OpenSSL to version 1.1.1a to increase overall minimum cyber
security level.

9.10.1:F1
The following legacy VAPIX parameter have been removed due to non-
usage: Network.DHCP.FqdnNetwork.DHCP.IPCheckEnabledNetwork.DHCP.RetriesNetwork.DHCP.StoreIPAddresseth0Network.DHCP.StoreIPAddresseth1Network.DHCP.Timeout

9.10.1:F2
Image rotation per video stream is not supported on newer ARTPEC generations
any longer. Instead the rotation of a video stream is configured globally per
videos ource.

9.10.1:F3
Updated Video Motion Detection to version 4.3.3.

9.10.1:F4
Upgraded Apache to version 2.4.37 to increase overall minimum cyber
security level.

9.10.1:F5
Firwmare Recovery will also rollback the previous state of applications
(ACAPs) now.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275