This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Upgrade recommendations
========================
When updating the device, it is recommended to do an intermediate upgrade
using an available AXIS OS LTS-release on the way to the desired AXIS OS
version.
For example, if the device currently is running AXIS OS 7.40 and you want to
upgrade to the latest AXIS OS Active Track (Example: 10.1, October 2020) then
you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80 LTS => 10.1.
More detailed recommendations can be found in the AXIS OS portal at
https://www.axis.com/support/firmware.
Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or according to instructions at
https://www.axis.com/support/firmware.
NOTE
========================
For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security
New features in 10.2.0
================================================================================
10.2.0:F1
Axis Object Analytics 1.0.15 beta is preinstalled.
10.2.0:F2
Updated Apache to version 2.4.46 to increase overall cyber security level.
10.2.0:F3
The AXIS Internet Dynamic DNS functionality has been removed.
10.2.0:F4
Removed feature NAT Traversal from UPnP.
10.2.0:F5
Added new events for supervising the digital audio input.
10.2.0:F6
Removed the record/play.cgi API.
Corrections in 10.2.0
================================================================================
10.2.0:C1
Corrected an issue that caused an error message to pop-up when pressing the test
button of an event using HTTP recipients.
10.2.0:C2
Corrected an issue that caused the 'last will & testament' message not to work.
Therefore, the default behavior for connect, disconnect and 'last will &
testament' messages have been modified. By default a common topic, {device
serial number}/event/connection, and a common payload structure will be used for
such messages.
10.2.0:C3
Corrected an issue that caused a hard factory default even though a soft factory
default was requested when upgrading the firmware via VAPIX.
10.2.0:C4
Corrected an issue that sometimes prevented adjustment of the focus window.
10.2.0:C5
P-Iris lens driver selection menu is now not visible when an i-CS lens is
connected. Selecting P-Iris driver for a connected P-Iris lens also works as
expected now.
10.2.0:C6
Corrected an issue that caused parallel HTTPS cgi requests to fail on rare
occasions.
10.2.0:C7
Corrected an issue that sometimes could make it impossible to export the full
length of recordings.
10.2.0:C8
Corrected an issue that caused the device to stop video streaming over multicast
after receiving multiple RTSP PLAY requests with "npt=0.000-" payload.
Upgrade recommendations
========================
When updating the device, it is recommended to do an intermediate upgrade
using an available AXIS OS LTS-release on the way to the desired AXIS OS
version.
For example, if the device currently is running AXIS OS 7.40 and you want to
upgrade to the latest AXIS OS Active Track (Example: 10.1, October 2020) then
you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80 LTS => 10.1.
More detailed recommendations can be found in the AXIS OS portal at
https://www.axis.com/support/firmware.
Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or according to instructions at
https://www.axis.com/support/firmware.
NOTE
========================
For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security
New features in 10.2.0
================================================================================
10.2.0:F1
Axis Object Analytics 1.0.15 beta is preinstalled.
10.2.0:F2
Updated Apache to version 2.4.46 to increase overall cyber security level.
10.2.0:F3
The AXIS Internet Dynamic DNS functionality has been removed.
10.2.0:F4
Removed feature NAT Traversal from UPnP.
10.2.0:F5
Added new events for supervising the digital audio input.
10.2.0:F6
Removed the record/play.cgi API.
Corrections in 10.2.0
================================================================================
10.2.0:C1
Corrected an issue that caused an error message to pop-up when pressing the test
button of an event using HTTP recipients.
10.2.0:C2
Corrected an issue that caused the 'last will & testament' message not to work.
Therefore, the default behavior for connect, disconnect and 'last will &
testament' messages have been modified. By default a common topic, {device
serial number}/event/connection, and a common payload structure will be used for
such messages.
10.2.0:C3
Corrected an issue that caused a hard factory default even though a soft factory
default was requested when upgrading the firmware via VAPIX.
10.2.0:C4
Corrected an issue that sometimes prevented adjustment of the focus window.
10.2.0:C5
P-Iris lens driver selection menu is now not visible when an i-CS lens is
connected. Selecting P-Iris driver for a connected P-Iris lens also works as
expected now.
10.2.0:C6
Corrected an issue that caused parallel HTTPS cgi requests to fail on rare
occasions.
10.2.0:C7
Corrected an issue that sometimes could make it impossible to export the full
length of recordings.
10.2.0:C8
Corrected an issue that caused the device to stop video streaming over multicast
after receiving multiple RTSP PLAY requests with "npt=0.000-" payload.