This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 10.4.0.1
===========================================================================
10.4.0.1:F1
Default Mapping of sources
Devices that are not configured as intermediary device for a Vapix Audio, Vapix Media Clip or SIP in AAM Edge, will by default play incoming audio on the device itself.
Default mapping of sources will not be enabled by default if upgrading from a previous Edge version, but can be enabled manually in system settings.
10.4.0.1:F2
Echo cancellation in device configuration web
With this fetaure it is possible to toggle echo canccellation on/off in the device configuration web. Echo cancelletion enables microphone gating to avoid echo/feedback loops in half-duplex mode.
10.4.0.1:F3
2 way audio
This enables you to setup a half-duplex call to the device. While sound is playing the microphone will be muted to prevent an echo of the speakers voice. To enalbe it you need to enable Echo Cancellation in HW2. You should also turn on full-duplex (to be able to get sound from the microphone, and adjust input gain according to your needs. AAM Edge automatically configure this for you if you use the device as a paging SIP/VAPIX Intercom source.
10.4.0.1:F4
Latency and sound profiles
The sould calibration app no offer the ability to set your desired sound and latency profiles. It support both default configuration for the site as well as detailed control for specific sources.
10.4.0.1:F5
OAK retrieval in device configuration web
Added the possibility to retrieve the device Owner Authentication Key (OAK) in the device web interface. Note that this functionality requires that the product have direct access to the internet.
10.4.0.1:F6
A factory default is now mandatory when trying to downgrade the device. See How to downgrade at https://www.axis.com/support/firmware for more information.
10.4.0.1:F7
AXIS Audio Manager Edge now support the Safari browser.
10.4.0.1:F8
New languages
Japanese, Korean, Russian, Traditional Chinese and Simplified Chinese are added to the list of supported languages [English, French, Italian, Spanish, German, Dutch, Polish, Portuguese (Brazilian)]
10.4.0.1:F9
Updated Apache to version 2.4.46
10.4.0.1:F10
Updated OpenSSL to version 1.1.1i
New features in 10.4.0.1
===========================================================================
10.4.0.1:F1
Default Mapping of sources
Devices that are not configured as intermediary device for a Vapix Audio, Vapix Media Clip or SIP in AAM Edge, will by default play incoming audio on the device itself.
Default mapping of sources will not be enabled by default if upgrading from a previous Edge version, but can be enabled manually in system settings.
10.4.0.1:F2
Echo cancellation in device configuration web
With this fetaure it is possible to toggle echo canccellation on/off in the device configuration web. Echo cancelletion enables microphone gating to avoid echo/feedback loops in half-duplex mode.
10.4.0.1:F3
2 way audio
This enables you to setup a half-duplex call to the device. While sound is playing the microphone will be muted to prevent an echo of the speakers voice. To enalbe it you need to enable Echo Cancellation in HW2. You should also turn on full-duplex (to be able to get sound from the microphone, and adjust input gain according to your needs. AAM Edge automatically configure this for you if you use the device as a paging SIP/VAPIX Intercom source.
10.4.0.1:F4
Latency and sound profiles
The sould calibration app no offer the ability to set your desired sound and latency profiles. It support both default configuration for the site as well as detailed control for specific sources.
10.4.0.1:F5
OAK retrieval in device configuration web
Added the possibility to retrieve the device Owner Authentication Key (OAK) in the device web interface. Note that this functionality requires that the product have direct access to the internet.
10.4.0.1:F6
A factory default is now mandatory when trying to downgrade the device. See How to downgrade at https://www.axis.com/support/firmware for more information.
10.4.0.1:F7
AXIS Audio Manager Edge now support the Safari browser.
10.4.0.1:F8
New languages
Japanese, Korean, Russian, Traditional Chinese and Simplified Chinese are added to the list of supported languages [English, French, Italian, Spanish, German, Dutch, Polish, Portuguese (Brazilian)]
10.4.0.1:F9
Updated Apache to version 2.4.46
10.4.0.1:F10
Updated OpenSSL to version 1.1.1i