Quantcast
Channel: Axis Communications Firmware
Viewing all 9486 articles
Browse latest View live
↧

AXIS P1367, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F4
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F5
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F6
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F7
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
Search

AXIS P1365_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
↧

AXIS P1364, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M5525-E, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.

8.30.1.1:C04
Corrected an issue that prevented the camera from finding good focus on rare occasions.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Changed the default audio bitrate to 32 kbps.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

↧

AXIS M3106-L_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
↧

AXIS M3106-LVE_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M3106-LVE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M3106-L, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
Search

AXIS M3105-LVE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
↧

AXIS M3105-L, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M3104-LVE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M3104-L, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M2026-LE_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
↧

AXIS M2026-LE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M2025-LE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
Search

AXIS M1125-E, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.30.1:F5
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1:F6
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F7
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 8.15.1
================================================================================

↧

AXIS M1125, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.30.1:F5
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1:F6
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F7
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 8.15.1
================================================================================

↧
↧

AXIS M1124-E, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.30.1:F5
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1:F6
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F7
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 8.15.1
================================================================================

↧

AXIS M1124, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.30.1:F5
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1:F6
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F7
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 8.15.1
================================================================================

↧

AXIS M1065-LW, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
Viewing all 9486 articles
Browse latest View live
Search