Quantcast
Channel: Axis Communications Firmware
Viewing all 9484 articles
Browse latest View live
↧

AXIS P3224-V_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
Search

AXIS P3224-VE_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
↧

AXIS P3224-LV_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS P3224-LVE_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS P1448-LE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F3
Changed the default audio bitrate to 32 kbps.

8.20.1:F4
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F5
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F6
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F7
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

↧
↧

AXIS P1447-LE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F3
Changed the default audio bitrate to 32 kbps.

8.20.1:F4
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F5
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F6
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F7
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

↧

AXIS P1445-LE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


Improved noise reduction tuning for dark scenes.

8.30.1:F7
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1:F8
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F9
Added support for AES-XTS-512 256-bit SD card encryption.

8.30.1:F10
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.

↧

AXIS P1435-LE, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
Search

AXIS P1435-E, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
↧

AXIS P1425-LE_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS P1405-LE_Mk_II, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M3046-V_1_8MM, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F2
Removed Auto HDMI capture mode. HDMI capture mode must now be chosen manually.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F5
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M3046-V, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F2
Removed Auto HDMI capture mode. HDMI capture mode must now be chosen manually.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F5
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
↧

AXIS M3045-WV, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F2
Removed Auto HDMI capture mode. HDMI capture mode must now be chosen manually.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F5
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M3045-V, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F2
Removed Auto HDMI capture mode. HDMI capture mode must now be chosen manually.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F5
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
Search

AXIS M3044-WV, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧

AXIS M3044-V, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
↧

AXIS M3016, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.



8.30.1:F4
Updated the maximum number of recipients for action rules to 20 from 10.

8.30.1:F5
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F6
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 7.15.5.1
================================================================================

↧

AXIS M3015, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.



8.30.1:F4
Updated the maximum number of recipients for action rules to 20 from 10.

8.30.1:F5
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F6
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 7.15.5.1
================================================================================

↧

AXIS Companion_Dome_WV, version 8.30.1.1

July 29, 2018, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.



8.20.1:F1
The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Removed Auto HDMI capture mode. HDMI capture mode must now be chosen manually.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Updated NTP server (openntpd) to version 6.2p3.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

↧
Viewing all 9484 articles
Browse latest View live
Search