Quantcast
Channel: Axis Communications Firmware
Viewing all 9484 articles
Browse latest View live

AXIS P5515-E, version 8.30.1.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.


AXIS P5515, version 8.30.1.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

AXIS P5514-E, version 8.30.1.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

AXIS P5514, version 8.30.1.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

AXIS P12_Thermal, version 8.30.1.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.30.1:F5
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1:F6
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F7
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 6.55.2.3
================================================================================

AXIS P12_MkII, version 8.30.1.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

8.10.1:F1
VMD (Video Motion Detection) is updated to version 4.2.

AXIS M3058-PLVE, version 8.30.1.2

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.2 since 8.30.1.1
=======================================

8.30.1.2:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.2:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.2:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


Updated the maximum number of recipients for action rules to 20 from 10.

8.30.1.1:F6
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1.1:F7
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1.1:F8
Added support for AES-XTS-512 256-bit SD card encryption.

8.30.1.1:F9
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.

AXIS M3057-PLVE, version 8.30.1.2

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.2 since 8.30.1.1
=======================================

8.30.1.2:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.2:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.2:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


Updated the maximum number of recipients for action rules to 20 from 10.

8.30.1.1:F6
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1.1:F7
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1.1:F8
Added support for AES-XTS-512 256-bit SD card encryption.

8.30.1.1:F9
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


AXIS FA54, version 8.30.1.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


8.30.1:F8
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1:F9
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F10
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 6.55.4.5
================================================================================

AXIS P3235-LVE, version 7.45.2

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

AXIS P3235-LV, version 7.45.2

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

AXIS Companion_Eye_Mini_L, version 7.45.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Supported AXIS API Image Resolutions for Companion Eye mini L
================================================================================

Resolution Exceptions
========== ==========

1920x1080
640x360

AXIS M1114, version 5.51.5.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.51.5.1 since 5.51.5
====================================

5.51.5.1:C01
Corrected an issue that caused the action engine to respawn on scheduled triggered action
events.

AXIS M1113, version 5.51.5.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.51.5.1 since 5.51.5
====================================

5.51.5.1:C01
Corrected an issue that caused the action engine to respawn on scheduled triggered action
events.

AXIS M1104, version 5.51.5.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.51.5.1 since 5.51.5
====================================

5.51.5.1:C01
Corrected an issue that caused the action engine to respawn on scheduled triggered action
events.


AXIS M1103, version 5.51.5.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.51.5.1 since 5.51.5
====================================

5.51.5.1:C01
Corrected an issue that caused the action engine to respawn on scheduled triggered action
events.

AXIS Q1602, version 5.60.1.11

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.60.1.11 since 5.60.1.10
=========================================

5.60.1.11:C01
Telnet support is removed to increase overall minimum cyber security level. SSH (Secure
Shell) is a secure alternative and it can be enabled via System Options> Advanced> Plain
Config> Network> SSH Enabled.

AXIS P1355-E, version 5.60.1.11

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.60.1.11 since 5.60.1.10
=========================================

5.60.1.11:C01
Telnet support is removed to increase overall minimum cyber security level. SSH (Secure
Shell) is a secure alternative and it can be enabled via System Options> Advanced> Plain
Config> Network> SSH Enabled.

AXIS P1355, version 5.60.1.11

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.60.1.11 since 5.60.1.10
=========================================

5.60.1.11:C01
Telnet support is removed to increase overall minimum cyber security level. SSH (Secure
Shell) is a secure alternative and it can be enabled via System Options> Advanced> Plain
Config> Network> SSH Enabled.

AXIS M1144-L, version 5.60.1.11

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 5.60.1.11 since 5.60.1.10
=========================================

5.60.1.11:C01
Telnet support is removed to increase overall minimum cyber security level. SSH (Secure
Shell) is a secure alternative and it can be enabled via System Options> Advanced> Plain
Config> Network> SSH Enabled.

Viewing all 9484 articles
Browse latest View live