Axis Communications Firmware

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

This is a minor LTS release.
These release notes are generic and contain all corrections done for all 6.50 LTS products.

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 6.50.2.4 since 6.50.2.3
=======================================

6.50.2.4:C01
General minor improvements to the 6.50 LTS platform.

6.50.2.4:C02
Corrected an issue causing CIFS networkshare to become read only on mount on rare
occasions.

6.50.2.4:C03
Added storage_stability_helper service which can remount a Network Share after a temporary
disconnection, even if it has become mounted read-only.

6.50.2.4:C04
Restart cam driver when block has signalled error.

6.50.2.4:C05
Updated Video Motion Detection to version 4.2.3.

6.50.2.4:C06
Added a warning showing that the camera should be restarted when changing capture mode.

6.50.2.4:C07
Updated OpenSSL to version 1.0.2o to increase overall minimum cyber security level.

6.50.2.4:C08
Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System ->
PlainConfig -> HTTPS to enforce the highest possible HTTPS negotiation client handshake
via TLSv1.2.

6.50.2.4:C09
Update lens selection Application to v1.0.4. Internet Explorer is now supported.

6.50.2.4:C10
Corrected an issue that prevented the user from controlling the PTZ dome
from the Q6000-E web-interface.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

This is a minor LTS release.
These release notes are generic and contains all corrections done for all 6.50 LTS products.

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 6.50.2.3 since 6.50.2.2
======================================

6.50.2.3:C01
General minor improvements to the 6.50 LTS platform.

6.50.2.3:C02
Corrected an issue that let a user modify capture mode without performing the required
restart during the initial set up of the camera.

6.50.2.3:C03
Corrected an issue that caused black images on rare occasions when high loads of Events
are sent to the camera.

6.50.2.3:C04
Support for zoom-tracking in Recorded Guard Tour. Previously only pan/tilt movements were
recorded.

6.50.2.3:C05
Corrected an issue that caused problems when testing multiple Email recipients.

6.50.2.3:C06
Corrected an issue in the trigger data that set Video loss to "Disconnected" as default
initial state even when the camera is initially connected.

6.50.2.3:C07
Corrected an issue that could cause e-mail recipients to not be formatted correctly.

6.50.2.3:C08
Corrected an issue that could cause synchronization to AVHS to fail.

6.50.2.3:C09
Corrected an issue that caused the camera to become unresponsive on rare occasions when
connected to an AVHS system.

6.50.2.3:C10
Updated AXIS Video Motion Detection to version 4.2.

6.50.2.3:C11
Updated AXIS Media Control (AMC) version to 7.3.10.1.

6.50.2.3:C12
Corrected critical vulnerability ACV-128401.

6.50.2.3:C13
Corrected an issue that prevented the user to add the camera to Genetec when HTTPS was
used.

6.50.2.3:C14
Adds PID/program name to network connection list in the Server Report.

6.50.2.3:C15
Corrected an issue that let the AXIS Camera Station failover recording not start instantly
on rare occasions.

6.50.2.3:C16
Corrected an issue that caused the camera to stop streaming on rare occasions.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Release 7.45.1
==============

This is the first official Release for AXIS P3807-PVE.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.25.4
================================================================================

8.25.4:F1
Removed possibility to edit scripts in cameras due to security reasons.

8.25.4:F2
Support for zoom-tracking in Recorded Guard Tour. Previously only pan/tilt
movements were recorded.

8.25.4:F3
Changed the default audio bitrate to 32 kbps.

8.25.4:F4
Changed the default input audio gain from 30 dB to 45 dB.

Corrections in 8.25.4
================================================================================

8.25.4:C1
Corrected critical vulnerability ACV-128401.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.25.4
================================================================================

8.25.4:F1
Removed possibility to edit scripts in cameras due to security reasons.

8.25.4:F2
Support for zoom-tracking in Recorded Guard Tour. Previously only pan/tilt
movements were recorded.

Corrections in 8.25.4
================================================================================

8.25.4:C1
Corrected critical vulnerability ACV-128401.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

New Features
====================

5.51.5:F01
Local Language Support, ability to change the camera's user interface to other
languages than English.

5.51.5:F02
Edge Storage Disruption Detection, ability to be notified when the Edge Storage
detects disruptions that may need administrative attention, typically disk
unavailable, read/write error, disk full or disk locked.

5.51.5:F03
Text Overlay character set extension, ability to use non-western characters in
the video text overlay. Note that, Right-to-left languages such as Arabic are
not supported.

5.51.5:F04
Text Overlay Font Size, ability to select three different font sizes for the
video text overlay in order to increase readability, especially for high
resolution video.

5.51.5:F05
Text Overlay Message Action, a camera action that provides a way to display a
user defined message in the image's text overlay upon a detected event.

5.51.5:F06
Email/SSL Recipient, ability for the camera to connect to common email services.
The camera includes predefined profiles for example, Gmail and Hotmail.

5.51.5:F07
HTTPS Recipient, systems using HTTP notifications from the camera can now do
this in a secure way over HTTPS.

5.51.5:F08
Upload Video Clip Action, ability to upload a video clip to an FTP server or an
email recipient upon an event. Note that, a media player with support for H.264
and Matroska File Format (MKV) is required to play the clip.

5.51.5:F9
Live Stream Access Detection, it is now possible to notify people that someone
is actively monitoring a camera.

5.51.5:F10
System Ready Event, ability to get notified when the camera has booted and all
services are initialized.

5.51.5:F11
SSH (Secure Shell), a command line interface is added to the camera that may be
used for specific support and maintenance activities. Note that, SSH is not
enabled by default.

5.51.5:F12
Virtual Inputs, used by clients to initiate Action Rules in the camera. Virtual
Inputs extends the existing "Manual Trigger" with 32 additional.

5.51.5:F13
AXIS ACAP Applications, the behavior for AXIS Cross Line Detection 1.x and AXIS
Video Motion Detection 2.x has been improved, making it less prone to false
detection on small objects.

5.51.5:F14
Centralized Certificate Management, certificates for HTTPS and 802.1x are now
managed in one place. The firmware also includes a number of pre-installed CA
certificates such as Verisign, Thawt and GeoTrust.

5.51.5:F15
Improved Constant Bitrate Control, the Constant Bit Rate (CBR) will now adjust
to target bit rate quicker.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New Features
================================================================================

5.1.5.8:F1
Using HTTP digest authentication for the web interface.

5.1.5.8:F2
Added the security related HTTP headers: Strict-Transport-Security,
X-XSS-Protection, X-Frame-Options, X-Content-Type-Options,
and Strict-Transport-Security.

5.1.5.8:F3
Added options to enable/disable device discovery through Bonjour and UPnP.

5.1.5.8:F4
Web server is now using cipher order.

Corrections in 5.1.5.8
================================================================================

5.1.5.8:C1
Disabled SSLv3 and TLSv1.0.

5.1.5.8:C2
Minimum length validation added for the decoder password

5.1.5.8:C3
The discovery function in camera wizard has better error handling for Bonjour
devices that lack certain properties.

5.1.5.8:C4
Domain name was not set properly

5.1.5.8:C5
Is only validating input on the active tab when adding a video source manually.

5.1.5.8:C6
The decoder will not automatically try to use a resolution higher than 1920x1080.

5.1.5.8:C7
NTP server is enabled by default.

5.1.5.8:C8
Better support for multi channel video sources. Fixed bug that only retrieved
video from the first channel, even if other channels was selected.

5.1.5.8:C9
Fixed bug that allowed completion of the first time wizard without setting a
password.

5.1.5.8:C10
Fixed bug that didn't allowed special characters in the camera password.

5.1.5.8:C11
Better validation of HTTP/HTTPS ports.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.40.1
================================================================================

8.40.1:F1
Renamed "Browser Stream Statistics" to "Client Stream Information". The Client
Stream Information are available in the web-interface of the camera.

8.40.1:F2
Updated apache webserver to version 2.4.33 to increase overall minimum cyber
security level.

8.40.1:F3
Added support for AES-CBC 256-bit SD card encryption.

8.40.1:F4
AXIS Video Motion Detection 4.2.5 is now pre-installed.

8.40.1:F5
AXIS Motion Guard and Fence Guard 2.1.4 are now pre-installed.

8.40.1:F6
AXIS Loitering Guard 2.1.4 is now pre-installed.

8.40.1:F7
Updated help files with more detailed information about SMB and Certificate
support in AXIS products.

8.40.1:F8
Added a new section "Snapshot of current CPU utilization" that prints
information about CPU utilization and memory consumption of processes in the
server report.

8.40.1:F9
Changed the default timeout of HTTP-Recipient based action rules from 10s to
120s to compensate for unstable networks or slow clients. After the timeout is
reached, the action rule will be re-tried.

Corrections in 8.40.1
================================================================================

8.40.1:C1
Corrected an issue that resets the barrel distortion correction settings after
updating the camera.

8.40.1:C2
Corrected an issue with incorrect handling of ACAPs after camera boot.

8.40.1:C3
Corrected an issue that prevented the user from formatting SD cards and the web-
interface to show incorrect information about network share status in Settings
-> System -> Storage.

8.40.1:C4
Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System ->
PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based
connections.

8.40.1:C5
Corrected an issue that could cause a network share to become read-only.

8.40.1:C6
Corrected an issue that prevented the overlay to show the correct state of
inputs when toggling.

8.40.1:C7
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive and the Apps tab not to be shown correctly.

8.40.1:C8
Corrected an issue that let the network share test under Events -> Recipient
fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0.

8.40.1:C9
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop
working after a firmware upgrade.

8.40.1:C10
Corrected an issue that caused the certificate signing request not to have an LF
(alt. CR-LF) every 64th character causing the certificate considered not being
valid e.g. when using symantec certificates.

8.40.1:C11
Corrected an issue that caused the image to be malformed while installing in
wall-mount position with 90 degree rotation.

8.40.1:C12
Corrected an issue that prevented the user from creating a Recipient when a "-"
sign was present in the host name.

8.40.1:C13
Corrected an issue that could cause the configuration file upload from ADM to
camera to fail.

8.40.1:C14
Corrected an issue that prevented the user to export recordings in the desired
time range.

8.40.1:C15
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.1:C16
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.40.1
================================================================================

8.40.1:F1
Renamed "Browser Stream Statistics" to "Client Stream Information". The Client
Stream Information are available in the web-interface of the camera.

8.40.1:F2
Updated apache webserver to version 2.4.33 to increase overall minimum cyber
security level.

8.40.1:F3
Added support for AES-CBC 256-bit SD card encryption.

8.40.1:F4
AXIS Video Motion Detection 4.2.5 is now pre-installed.

8.40.1:F5
AXIS Motion Guard and Fence Guard 2.1.4 are now pre-installed.

8.40.1:F6
AXIS Loitering Guard 2.1.4 is now pre-installed.

8.40.1:F7
Updated help files with more detailed information about SMB and Certificate
support in AXIS products.

8.40.1:F8
Added a new section "Snapshot of current CPU utilization" that prints
information about CPU utilization and memory consumption of processes in the
server report.

8.40.1:F9
Changed the default timeout of HTTP-Recipient based action rules from 10s to
120s to compensate for unstable networks or slow clients. After the timeout is
reached, the action rule will be re-tried.

Corrections in 8.40.1
================================================================================

8.40.1:C1
Corrected an issue that resets the barrel distortion correction settings after
updating the camera.

8.40.1:C2
Corrected an issue with incorrect handling of ACAPs after camera boot.

8.40.1:C3
Corrected an issue that prevented the user from formatting SD cards and the web-
interface to show incorrect information about network share status in Settings
-> System -> Storage.

8.40.1:C4
Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System ->
PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based
connections.

8.40.1:C5
Corrected an issue that could cause a network share to become read-only.

8.40.1:C6
Corrected an issue that prevented the overlay to show the correct state of
inputs when toggling.

8.40.1:C7
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive and the Apps tab not to be shown correctly.

8.40.1:C8
Corrected an issue that let the network share test under Events -> Recipient
fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0.

8.40.1:C9
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop
working after a firmware upgrade.

8.40.1:C10
Corrected an issue that caused the certificate signing request not to have an LF
(alt. CR-LF) every 64th character causing the certificate considered not being
valid e.g. when using symantec certificates.

8.40.1:C11
Corrected an issue that prevented the user from creating a Recipient when a "-"
sign was present in the host name.

8.40.1:C12
Corrected an issue that caused the camera to become unresponsive on rare
occasions and improved the overall camera performance when AXIS Perimeter
Defender is used.

8.40.1:C13
Corrected an issue that could cause the configuration file upload from ADM to
camera to fail.

8.40.1:C14
Corrected an issue that prevented the user to export recordings in the desired
time range.

8.40.1:C15
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.1:C16
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.40.1
================================================================================

8.40.1:F1
Renamed "Browser Stream Statistics" to "Client Stream Information". The Client
Stream Information are available in the web-interface of the camera.

8.40.1:F2
Added support for ONVIF Audio Backchannel.

8.40.1:F3
Updated apache webserver to version 2.4.33 to increase overall minimum cyber
security level.

8.40.1:F4
Added support for AES-CBC 256-bit SD card encryption.

8.40.1:F5
AXIS Video Motion Detection 4.2.5 is now pre-installed.

8.40.1:F6
AXIS Motion Guard and Fence Guard 2.1.4 are now pre-installed.

8.40.1:F7
Updated help files with more detailed information about SMB and Certificate
support in AXIS products.

8.40.1:F8
Added a new section "Snapshot of current CPU utilization" that prints
information about CPU utilization and memory consumption of processes in the
server report.

8.40.1:F9
Changed the default timeout of HTTP-Recipient based action rules from 10s to
120s to compensate for unstable networks or slow clients. After the timeout is
reached, the action rule will be re-tried.

8.40.1:F10
Modified the access rights for serial-port connected cameras to increase overall
minimum cyber security level.

Corrections in 8.40.1
================================================================================

8.40.1:C1
Corrected an issue with incorrect handling of ACAPs after camera boot.

8.40.1:C2
Corrected an issue that prevented the user from formatting SD cards and the web-
interface to show incorrect information about network share status in Settings
-> System -> Storage.

8.40.1:C3
Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System ->
PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based
connections.

8.40.1:C4
Corrected an issue that could cause a network share to become read-only.

8.40.1:C5
Corrected an issue that prevented the overlay to show the correct state of
inputs when toggling.

8.40.1:C6
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive and the Apps tab not to be shown correctly.

8.40.1:C7
Corrected an issue that let the network share test under Events -> Recipient
fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0.

8.40.1:C8
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop
working after a firmware upgrade.

8.40.1:C9
Corrected an issue that caused the certificate signing request not to have an LF
(alt. CR-LF) every 64th character causing the certificate considered not being
valid e.g. when using symantec certificates.

8.40.1:C10
Corrected an issue that prevented the user from creating a Recipient when a "-"
sign was present in the host name.

8.40.1:C11
Corrected an issue that could cause the configuration file upload from ADM to
camera to fail.

8.40.1:C12
Corrected an issue that prevented the user to export recordings in the desired
time range.

8.40.1:C13
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.1:C14
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.40.1
================================================================================

8.40.1:F1
Renamed "Browser Stream Statistics" to "Client Stream Information". The Client
Stream Information are available in the web-interface of the camera.

8.40.1:F2
Added support for ONVIF Audio Backchannel.

8.40.1:F3
Updated apache webserver to version 2.4.33 to increase overall minimum cyber
security level.

8.40.1:F4
AXIS Video Motion Detection 4.2.5 is now pre-installed.

8.40.1:F5
AXIS Motion Guard and Fence Guard 2.1.4 are now pre-installed.

8.40.1:F6
AXIS Loitering Guard 2.1.4 is now pre-installed.

8.40.1:F7
Updated help files with more detailed information about SMB and Certificate
support in AXIS products.

8.40.1:F8
Added a new section "Snapshot of current CPU utilization" that prints
information about CPU utilization and memory consumption of processes in the
server report.

8.40.1:F9
Changed the default timeout of HTTP-Recipient based action rules from 10s to
120s to compensate for unstable networks or slow clients. After the timeout is
reached, the action rule will be re-tried.

8.40.1:F10
Modified the access rights for serial-port connected cameras to increase overall
minimum cyber security level.

Corrections in 8.40.1
================================================================================

8.40.1:C1
Corrected an issue that resets the barrel distortion correction settings after
updating the camera.

8.40.1:C2
Corrected an issue with incorrect handling of ACAPs after camera boot.

8.40.1:C3
Corrected an issue that prevented the user from formatting SD cards and the web-
interface to show incorrect information about network share status in Settings
-> System -> Storage.

8.40.1:C4
Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System ->
PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based
connections.

8.40.1:C5
Corrected an issue that could cause a network share to become read-only.

8.40.1:C6
Corrected an issue that prevented the overlay to show the correct state of
inputs when toggling.

8.40.1:C7
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive and the Apps tab not to be shown correctly.

8.40.1:C8
Corrected an issue that let the network share test under Events -> Recipient
fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0.

8.40.1:C9
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop
working after a firmware upgrade.

8.40.1:C10
Corrected an issue that caused the certificate signing request not to have an LF
(alt. CR-LF) every 64th character causing the certificate considered not being
valid e.g. when using symantec certificates.

8.40.1:C11
Corrected an issue that prevented the user from creating a Recipient when a "-"
sign was present in the host name.

8.40.1:C12
Corrected an issue that could cause the configuration file upload from ADM to
camera to fail.

8.40.1:C13
Corrected an issue that prevented the user to export recordings in the desired
time range.

8.40.1:C14
Corrected an issue that prevented the camera to switch between Day/Night mode on
rare occasions.

8.40.1:C15
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.1:C16
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.40.1
================================================================================

8.40.1:F1
Renamed "Browser Stream Statistics" to "Client Stream Information". The Client
Stream Information are available in the web-interface of the camera.

8.40.1:F2
Added support for ONVIF Audio Backchannel.

8.40.1:F3
Updated apache webserver to version 2.4.33 to increase overall minimum cyber
security level.

8.40.1:F4
Added support for AES-CBC 256-bit SD card encryption.

8.40.1:F5
AXIS Video Motion Detection 4.2.5 is now pre-installed.

8.40.1:F6
AXIS Motion Guard and Fence Guard 2.1.4 are now pre-installed.

8.40.1:F7
AXIS Loitering Guard 2.1.4 is now pre-installed.

8.40.1:F8
Updated help files with more detailed information about SMB and Certificate
support in AXIS products.

8.40.1:F9
Added a new section "Snapshot of current CPU utilization" that prints
information about CPU utilization and memory consumption of processes in the
server report.

8.40.1:F10
Changed the default timeout of HTTP-Recipient based action rules from 10s to
120s to compensate for unstable networks or slow clients. After the timeout is
reached, the action rule will be re-tried.

8.40.1:F11
Modified the access rights for serial-port connected cameras to increase overall
minimum cyber security level.

Corrections in 8.40.1
================================================================================

8.40.1:C1
Corrected an issue that resets the barrel distortion correction settings after
updating the camera.

8.40.1:C2
Corrected an issue with incorrect handling of ACAPs after camera boot.

8.40.1:C3
Corrected an issue that prevented the user from formatting SD cards and the web-
interface to show incorrect information about network share status in Settings
-> System -> Storage.

8.40.1:C4
Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System ->
PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based
connections.

8.40.1:C5
Corrected an issue that could cause a network share to become read-only.

8.40.1:C6
Corrected an issue that prevented the overlay to show the correct state of
inputs when toggling.

8.40.1:C7
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive and the Apps tab not to be shown correctly.

8.40.1:C8
Corrected an issue that let the network share test under Events -> Recipient
fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0.

8.40.1:C9
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop
working after a firmware upgrade.

8.40.1:C10
Corrected an issue that caused the certificate signing request not to have an LF
(alt. CR-LF) every 64th character causing the certificate considered not being
valid e.g. when using symantec certificates.

8.40.1:C11
Corrected an issue that prevented the user from creating a Recipient when a "-"
sign was present in the host name.

8.40.1:C12
Corrected an issue that could cause the configuration file upload from ADM to
camera to fail.

8.40.1:C13
Corrected an issue that prevented the user to export recordings in the desired
time range.

8.40.1:C14
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.1:C15
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.40.1
================================================================================

8.40.1:F1
Renamed "Browser Stream Statistics" to "Client Stream Information". The Client
Stream Information are available in the web-interface of the camera.

8.40.1:F2
Added support for ONVIF Audio Backchannel.

8.40.1:F3
Updated apache webserver to version 2.4.33 to increase overall minimum cyber
security level.

8.40.1:F4
Added support for AES-CBC 256-bit SD card encryption.

8.40.1:F5
AXIS Video Motion Detection 4.2.5 is now pre-installed.

8.40.1:F6
Updated help files with more detailed information about SMB and Certificate
support in AXIS products.

8.40.1:F7
Added a new section "Snapshot of current CPU utilization" that prints
information about CPU utilization and memory consumption of processes in the
server report.

8.40.1:F8
Changed the default timeout of HTTP-Recipient based action rules from 10s to
120s to compensate for unstable networks or slow clients. After the timeout is
reached, the action rule will be re-tried.

Corrections in 8.40.1
================================================================================

8.40.1:C1
Corrected an issue with incorrect handling of ACAPs after camera boot.

8.40.1:C2
Corrected an issue that prevented the user from formatting SD cards and the web-
interface to show incorrect information about network share status in Settings
-> System -> Storage.

8.40.1:C3
Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System ->
PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based
connections.

8.40.1:C4
Corrected an issue that could cause a network share to become read-only.

8.40.1:C5
Corrected an issue that prevented the overlay to show the correct state of
inputs when toggling.

8.40.1:C6
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive and the Apps tab not to be shown correctly.

8.40.1:C7
Corrected an issue that let the network share test under Events -> Recipient
fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0.

8.40.1:C8
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop
working after a firmware upgrade.

8.40.1:C9
Corrected an issue that caused the certificate signing request not to have an LF
(alt. CR-LF) every 64th character causing the certificate considered not being
valid e.g. when using symantec certificates.

8.40.1:C10
Corrected an issue that prevented the user from creating a Recipient when a "-"
sign was present in the host name.

8.40.1:C11
Corrected an issue that caused the camera to become unresponsive on rare
occasions and improved the overall camera performance when AXIS Perimeter
Defender is used.

8.40.1:C12
Corrected an issue that could cause the configuration file upload from ADM to
camera to fail.

8.40.1:C13
Corrected an issue that prevented the user to export recordings in the desired
time range.

8.40.1:C14
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.1:C15
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.40.1
================================================================================

8.40.1:F1
Renamed "Browser Stream Statistics" to "Client Stream Information". The Client
Stream Information are available in the web-interface of the camera.

8.40.1:F2
Updated apache webserver to version 2.4.33 to increase overall minimum cyber
security level.

8.40.1:F3
Added support for AES-CBC 256-bit SD card encryption.

8.40.1:F4
AXIS Video Motion Detection 4.2.5 is now pre-installed.

8.40.1:F5
Updated help files with more detailed information about SMB and Certificate
support in AXIS products.

8.40.1:F6
Added a new section "Snapshot of current CPU utilization" that prints
information about CPU utilization and memory consumption of processes in the
server report.

8.40.1:F7
Changed the default timeout of HTTP-Recipient based action rules from 10s to
120s to compensate for unstable networks or slow clients. After the timeout is
reached, the action rule will be re-tried.

Corrections in 8.40.1
================================================================================

8.40.1:C1
Corrected an issue with incorrect handling of ACAPs after camera boot.

8.40.1:C2
Corrected an issue that prevented the user from formatting SD cards and the web-
interface to show incorrect information about network share status in Settings
-> System -> Storage.

8.40.1:C3
Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System ->
PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based
connections.

8.40.1:C4
Corrected an issue that could cause a network share to become read-only.

8.40.1:C5
Corrected an issue that prevented the overlay to show the correct state of
inputs when toggling.

8.40.1:C6
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive and the Apps tab not to be shown correctly.

8.40.1:C7
Corrected an issue that let the network share test under Events -> Recipient
fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0.

8.40.1:C8
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop
working after a firmware upgrade.

8.40.1:C9
Corrected an issue that caused the certificate signing request not to have an LF
(alt. CR-LF) every 64th character causing the certificate considered not being
valid e.g. when using symantec certificates.

8.40.1:C10
Corrected an issue that prevented the user from creating a Recipient when a "-"
sign was present in the host name.

8.40.1:C11
Corrected an issue that caused the camera to become unresponsive on rare
occasions and improved the overall camera performance when AXIS Perimeter
Defender is used.

8.40.1:C12
Corrected an issue that could cause the configuration file upload from ADM to
camera to fail.

8.40.1:C13
Corrected an issue that prevented the user to export recordings in the desired
time range.

8.40.1:C14
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.1:C15
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.

AXIS Q6000-E, version 6.50.2.4

AXIS P1365-E, version 6.50.2.3

AXIS P3807-PVE, version 7.45.1

AXIS Q6054_Mk_III, version 8.25.4

AXIS Q6054-E_Mk_III, version 8.25.4

AXIS P5534-E, version 5.51.5

AXIS P5534, version 5.51.5

AXIS T8705, version 5.1.5.8

AXIS Q3709-PVE, version 5.75.1.10

AXIS Q3708-PVE, version 5.95.4.8

AXIS Q3617, version 8.40.1

AXIS Q3615, version 8.40.1

AXIS Q1775-E, version 8.40.1

AXIS Q1775, version 8.40.1

AXIS Q1647, version 8.40.1

AXIS Q1645, version 8.40.1

AXIS Q1615_Mk_II, version 8.40.1

AXIS P3235-LVE, version 8.40.1

AXIS P3235-LV, version 8.40.1

AXIS P3225-V_Mk_II, version 8.40.1