This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New Features
============
5.50.1:F01
Local Language Support, ability to change the cameras user interface to other
languages than English.
5.50.1:F02
Edge Storage Disruption Detection, ability to be notified when Edge Storage
detects disruptions that may need administrative attention, typically disk
unavailable, read/write error, disk full or disk locked.
5.50.1:F03
Text Overlay character set extension, ability to use non-western characters in
the video text overlay. Note that Right-to-left languages (e.g. Arabic) are not
supported.
5.50.1:F04
Text Overlay Message Action: upon a detected event the camera can display a user
defined message in the text overlay.
5.50.1:F05
Email/SSL Recipient, ability for the camera to connect to common email services.
The camera includes predefined profiles for e.g. Gmail and Hotmail.
5.50.1:F06
HTTPS Recipient, systems using HTTP notifications from the camera can now do
this in a secure way over HTTPS.
5.50.1:F07
Upload Video Clip Action, ability to upload a video clip to an FTP server or an
email recipient upon an event. Note that a media player with support for H.264
and Matroska File Format (MKV) is required to play the clip.
5.50.1:F08
Live Stream Access Detection, it is now possible to notify people that someone
is actively monitoring a camera.
5.50.1:F09
Edge Storage Device Redundancy, ability to automatically switch recording device
between SD Card and NAS if one device detects disruption.
5.50.1:F10
System Ready Event, ability to get notified when the camera has booted and all
services are initialized.
5.50.1:F11
Virtual Inputs, used by clients to initiate Action Rules in the camera. Virtual
Inputs extends the existing "Manual Trigger" with 32 additional virtual inputs
which could be executed through the webservice API.
5.50.1:F12
Centralized Certificate Management, certificates for HTTPS and 802.1x are now
managed in one place. The firmware also includes a number of pre-installed CA
certificates such as Verisign, Thawt and GeoTrust.
5.50.1:F13
Improved Constant Bitrate Control, the Constant Bit Rate (CBR) will now adjust
to target bit rate quicker.
5.50.1:F14
SSH (Secure Shell), a command line interface is added to the camera that may be
used for specific support and maintenance activities. Note. Not enabled by
default.
5.50.1:F15
Support for Internet Explorer 11.
5.50.5:F16
Axis is now extending SNMP with AXIS Video MIB (Management Information Base).
The Video MIB enables notification of a number of possible disruptions in Axis
products such as fan failure, temperature limits, storage disruptions,
tampering, video/audio connectors disconnect, etc via SNMP traps.
A MIB is released for Axis products.
See http://www.axis.com/techsup/software/index.htm for more information.
5.50.5:F17
Possibility to trigger action rules based on temperature.
Corrections
===========
5.50.5:C01
When selecting 'set password over HTTPS' after a flash_all, the user will not be
prompted for login.
5.50.5:C02
Schedule is now visible in Action rules list.
5.50.5:C03
Timezone info in the sending out email header gets updated when changing the
camera 'time zone' in the webinterface.
5.50.5:C04
Privacy masks cover the parts requested by user.
5.50.5:C05
To increase robustness, a retry of 10 seconds is added for an action rule.
If action fails it will retry until it succeeds or until the rule is no longer
active.
5.50.5:C06
The Axis Java Applet is now signed with a trusted certificate. For more
information on supported Java versions, see http://www.axis.com/techsup/.
5.50.5:C07
Creating email recipient with action rule on Mac OS with Safari browser is
working as expected.
5.50.5:C08
AVHS 2.20 stclient enhancements.
5.50.5:C09
Improved AxisNS stability.
5.50.5:C10
Improvement in handling large NTP time differences with the server.
New Features
============
5.50.1:F01
Local Language Support, ability to change the cameras user interface to other
languages than English.
5.50.1:F02
Edge Storage Disruption Detection, ability to be notified when Edge Storage
detects disruptions that may need administrative attention, typically disk
unavailable, read/write error, disk full or disk locked.
5.50.1:F03
Text Overlay character set extension, ability to use non-western characters in
the video text overlay. Note that Right-to-left languages (e.g. Arabic) are not
supported.
5.50.1:F04
Text Overlay Message Action: upon a detected event the camera can display a user
defined message in the text overlay.
5.50.1:F05
Email/SSL Recipient, ability for the camera to connect to common email services.
The camera includes predefined profiles for e.g. Gmail and Hotmail.
5.50.1:F06
HTTPS Recipient, systems using HTTP notifications from the camera can now do
this in a secure way over HTTPS.
5.50.1:F07
Upload Video Clip Action, ability to upload a video clip to an FTP server or an
email recipient upon an event. Note that a media player with support for H.264
and Matroska File Format (MKV) is required to play the clip.
5.50.1:F08
Live Stream Access Detection, it is now possible to notify people that someone
is actively monitoring a camera.
5.50.1:F09
Edge Storage Device Redundancy, ability to automatically switch recording device
between SD Card and NAS if one device detects disruption.
5.50.1:F10
System Ready Event, ability to get notified when the camera has booted and all
services are initialized.
5.50.1:F11
Virtual Inputs, used by clients to initiate Action Rules in the camera. Virtual
Inputs extends the existing "Manual Trigger" with 32 additional virtual inputs
which could be executed through the webservice API.
5.50.1:F12
Centralized Certificate Management, certificates for HTTPS and 802.1x are now
managed in one place. The firmware also includes a number of pre-installed CA
certificates such as Verisign, Thawt and GeoTrust.
5.50.1:F13
Improved Constant Bitrate Control, the Constant Bit Rate (CBR) will now adjust
to target bit rate quicker.
5.50.1:F14
SSH (Secure Shell), a command line interface is added to the camera that may be
used for specific support and maintenance activities. Note. Not enabled by
default.
5.50.1:F15
Support for Internet Explorer 11.
5.50.5:F16
Axis is now extending SNMP with AXIS Video MIB (Management Information Base).
The Video MIB enables notification of a number of possible disruptions in Axis
products such as fan failure, temperature limits, storage disruptions,
tampering, video/audio connectors disconnect, etc via SNMP traps.
A MIB is released for Axis products.
See http://www.axis.com/techsup/software/index.htm for more information.
5.50.5:F17
Possibility to trigger action rules based on temperature.
Corrections
===========
5.50.5:C01
When selecting 'set password over HTTPS' after a flash_all, the user will not be
prompted for login.
5.50.5:C02
Schedule is now visible in Action rules list.
5.50.5:C03
Timezone info in the sending out email header gets updated when changing the
camera 'time zone' in the webinterface.
5.50.5:C04
Privacy masks cover the parts requested by user.
5.50.5:C05
To increase robustness, a retry of 10 seconds is added for an action rule.
If action fails it will retry until it succeeds or until the rule is no longer
active.
5.50.5:C06
The Axis Java Applet is now signed with a trusted certificate. For more
information on supported Java versions, see http://www.axis.com/techsup/.
5.50.5:C07
Creating email recipient with action rule on Mac OS with Safari browser is
working as expected.
5.50.5:C08
AVHS 2.20 stclient enhancements.
5.50.5:C09
Improved AxisNS stability.
5.50.5:C10
Improvement in handling large NTP time differences with the server.