Quantcast
Channel: Axis Communications Firmware
Viewing all 9476 articles
Browse latest View live
↧

AXIS Q6075, version 9.40.1.3

October 2, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Features in 9.40.1
================================================================================

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Updated Video Motion Detection to version 4.4.0.

9.40.1:F10
Updated Motion Guard to version 2.2.0.

9.40.1:F11
Updated Fence Guard to version 2.2.0.

9.40.1:F12
Updated Loitering Guard to version 2.2.0

9.40.1:F13
Added support for millisecond timestamps in JPEG header.

9.30.1:F1
Added an API for mDNS-SD.

9.30.1:F2
Updated Motion Guard to version 2.1.9.

9.30.1:F3
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.30.1:F4
Added support for "Wait at least time x" before re-running an configured action
rule.

9.30.1:F5
TLS1.0 and TLS1.1 is now disabled by default.

9.30.1:F6
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.

The following parameters need to be configured prior to initiating a video
stream via SSM:

Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort
Network.RTP.R#.AudioAdress
Network.RTP.R#.AudioPort

9.30.1:F7
Added support for TLSv1.3.

9.30.1:F8
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.30.1:F9
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.30.1:F10
Updated Fence Guard to version 2.1.9.

9.30.1:F11
Updated Video Motion Detection to version 4.3.5.

9.30.1:F12
Updated Loitering Guard to version 2.1.9.


Corrections in 9.40.1.3
================================================================================

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

↧
Search

AXIS P5655-E, version 9.40.1.3

October 2, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Features in 9.40.1
================================================================================

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Added support for ONVIF Profile T.

9.40.1:F10
Added support for millisecond timestamps in JPEG header.

9.30.1:F1
Added an API for mDNS-SD.

9.30.1:F2
TLS1.0 and TLS1.1 is now disabled by default.

9.30.1:F3
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.

The following parameters need to be configured prior to initiating a video
stream via SSM:

Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort
Network.RTP.R#.AudioAdress
Network.RTP.R#.AudioPort

9.30.1:F4
Added support for TLSv1.3.

9.30.1:F5
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.30.1:F6
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.30.1:F7
Updated Video Motion Detection to version 4.3.5.

9.30.1:F8
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.30.1:F9
Added support for "Wait at least time x" before re-running an configured action
rule.

9.20.1:F1
Firmware is now signed by AXIS to increase overall minimum cybersecurity level.
More information about Signed Firmware can be found here
https://www.axis.com/support/faq/FAQ116424.

9.20.1:F2
Added Video Streaming Indicator in web interface.

9.20.1:F3
Upgraded Apache to version 2.4.38 to increase overall minimum cyber security
level.

9.20.1:F4
Updated Video Motion Detection to version 4.3.4.

9.20.1:F5
Added support for signed ACAP applications.

9.20.1:F6
Updated OpenSSL to version 1.1.1a to increase overall minimum cyber security
level.

9.10.1:F1
The following legacy VAPIX parameter have been removed due to non-usage:

Network.DHCP.Fqdn
Network.DHCP.IPCheckEnabled
Network.DHCP.Retries
Network.DHCP.StoreIPAddresseth0
Network.DHCP.StoreIPAddresseth1
Network.DHCP.Timeout

9.10.1:F2
Image rotation per video stream is not supported on newer ARTPEC generations any
longer. Instead the rotation of a video stream is configured globally per video
source.

9.10.1:F3
Updated Video Motion Detection to version 4.3.3.

9.10.1:F4
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.

9.10.1:F5
Firwmare Recovery will also rollback the previous state of applications (ACAPs)
now.


Corrections in 9.40.1.3
================================================================================

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

9.40.1.3:C2
Corrected an issue that prevented the camera to switch the IR cut filter when
WDR was enabled.

↧
↧

AXIS P3245-VE, version 9.40.1.3

October 2, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Features in 9.40.1
================================================================================

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Added support for millisecond timestamps in JPEG header.

9.40.1:F10
Added an API for mDNS-SD.

9.40.1:F11
TLS1.0 and TLS1.1 is now disabled by default.

9.40.1:F12
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.

The following parameters need to be configured prior to initiating a video
stream via SSM:

Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort
Network.RTP.R#.AudioAdress
Network.RTP.R#.AudioPort

9.40.1:F13
Added support for TLSv1.3.

9.40.1:F14
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.40.1:F15
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.40.1:F16
Updated Video Motion Detection to version 4.3.5.

9.40.1:F17
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.40.1:F18
Added support for "Wait at least time x" before re-running an configured action
rule.


Corrections in 9.40.1.3
================================================================================

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

↧

AXIS P3245-V, version 9.40.1.3

October 2, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Features in 9.40.1
================================================================================

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Added support for millisecond timestamps in JPEG header.

9.40.1:F10
Added an API for mDNS-SD.

9.40.1:F11
TLS1.0 and TLS1.1 is now disabled by default.

9.40.1:F12
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.

The following parameters need to be configured prior to initiating a video
stream via SSM:

Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort
Network.RTP.R#.AudioAdress
Network.RTP.R#.AudioPort

9.40.1:F13
Added support for TLSv1.3.

9.40.1:F14
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.40.1:F15
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.40.1:F16
Updated Video Motion Detection to version 4.3.5.

9.40.1:F17
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.40.1:F18
Added support for "Wait at least time x" before re-running an configured action
rule.


Corrections in 9.40.1.3
================================================================================

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

↧

AXIS P3245-LVE, version 9.40.1.3

October 2, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Features in 9.40.1
================================================================================

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Added support for millisecond timestamps in JPEG header.

9.40.1:F10
Added an API for mDNS-SD.

9.40.1:F11
TLS1.0 and TLS1.1 is now disabled by default.

9.40.1:F12
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.

The following parameters need to be configured prior to initiating a video
stream via SSM:

Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort
Network.RTP.R#.AudioAdress
Network.RTP.R#.AudioPort

9.40.1:F13
Added support for TLSv1.3.

9.40.1:F14
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.40.1:F15
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.40.1:F16
Updated Video Motion Detection to version 4.3.5.

9.40.1:F17
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.40.1:F18
Added support for "Wait at least time x" before re-running an configured action
rule.


Corrections in 9.40.1.3
================================================================================

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

↧
↧

AXIS P3245-LV, version 9.40.1.3

October 2, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Features in 9.40.1
================================================================================

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Added support for millisecond timestamps in JPEG header.

9.40.1:F10
Added an API for mDNS-SD.

9.40.1:F11
TLS1.0 and TLS1.1 is now disabled by default.

9.40.1:F12
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.

The following parameters need to be configured prior to initiating a video
stream via SSM:

Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort
Network.RTP.R#.AudioAdress
Network.RTP.R#.AudioPort

9.40.1:F13
Added support for TLSv1.3.

9.40.1:F14
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.40.1:F15
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.40.1:F16
Updated Video Motion Detection to version 4.3.5.

9.40.1:F17
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.40.1:F18
Added support for "Wait at least time x" before re-running an configured action
rule.


Corrections in 9.40.1.3
================================================================================

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

↧

AXIS A9188-VE, version 1.84.0

October 9, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.84.0
================================================================================

1.84.0:F1

The recipient capabilities in the I/O module is highly improved.

1.84.0:F2
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration. This change only affects
products in its factory defaulted state, products that are already deployed in
production systems are not affected by this update until factory defaulted

↧

AXIS A9188, version 1.84.0

October 9, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.84.0
================================================================================

1.84.0:F1

The recipient capabilities in the I/O module is highly improved.

1.84.0:F2
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration. This change only affects
products in its factory defaulted state, products that are already deployed in
production systems are not affected by this update until factory defaulted

↧
Search

AXIS A9161, version 1.84.0

October 9, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.84.0
================================================================================

1.84.0:F1

The recipient capabilities in the I/O module is highly improved.

1.84.0:F2
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration. This change only affects
products in its factory defaulted state, products that are already deployed in
production systems are not affected by this update until factory defaulted

↧
↧

AXIS Q1798-LE, version 9.40.1.3

October 13, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.40.1
================================================================================

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Updated Video Motion Detection to version 4.4.0.

9.40.1:F10
Updated Motion Guard to version 2.2.0.

9.40.1:F11
Updated Fence Guard to version 2.2.0.

9.40.1:F12
Updated Loitering Guard to version 2.2.0

9.40.1:F13
Added support for millisecond timestamps in JPEG header.


Corrections in 9.40.1.3
================================================================================

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

↧

AXIS V5915, version 5.75.1.13

September 16, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.75.1.13 since 5.75.1.12
=========================================

5.75.1.13:C01
Removed the root users default password in factory defaulted firmware. The password of
the root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.

↧

AXIS V5914, version 5.75.1.13

September 25, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.75.1.13 since 5.75.1.12
=========================================

5.75.1.13:C01
Removed the root users default password in factory defaulted firmware. The password of
the root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.

↧

AXIS Q1942, version 8.40.3

October 19, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

New features in 8.40.3
================================================================================

8.40.3:F01
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.

8.40.3:F02
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk. The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

8.40.3:F03
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

8.40.3:F04
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

8.40.3:F05
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

8.40.3:F06
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

8.40.3:F09
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to improve the user experience.

8.40.3:F10
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

8.40.3:F11
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

8.40.3:F12
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.40.3:F13
AXIS Video Motion Detection 4.2-5 is now pre-installed.

8.40.3:F14
Support for signed firmware to increase overall cyber security level.

Corrections in 8.40.3
================================================================================

8.40.3:C01
Fixed critical vulnerability ACV-116267.

8.40.3:C02
Corrected critical vulnerability ACV-128401.

8.40.3:C03
Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber
security level.

8.40.3:C04
Patched security vulernability CVE-2018-14526 to increase overall minimum cyber
security level.

8.40.3:C05
Update libssh2 to version 1.9.0 to increase overall minimum cyber security level. This
update includes correction for CVE-2019-13115.

8.40.3:C06
Corrected the following kernel vulnerabilities to increase overall minimum cyber security
level (collectively known as "TCP SACK PANIC"):
CVE-2019-11477,
CVE-2019-11478,
CVE-2019-11479.

8.40.3:C07
Updated openSSL to version 1.1.1c to increase overall minimum cyber security level.

8.40.3:C08
Added support for TLSv1.3.

8.40.3:C09
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3:C10
Updated OpenSSH to version 7.9p to increase overall minimum cyber security level.

8.40.3:C11
Corrected the following security vulnerabilities to increase overall minimum cyber
security level: CVE-2019-3855, CVE-2019-3856, CVE-2019-3857, CVE-2019-3858, CVE-2019-3859,
CVE-2019-3860, CVE-2019-3861, CVE-2019-3862, CVE-2019-3863.

8.40.3:C12
Corrected security vulnerability CVE-2019-0217 in Apache to increase overall minimum cyber
security level.

8.40.3:C13
Corrected security vulnerability CVE-2017-16544 in BusyBox to increase overall minimum
cyber security level.

8.40.3:C14
Corrected the following vulnerabilities in order to increase overall minimum cybersecurity
level: CVE-2018-16864, CVE-2018-16865, CVE-2018-16866.

8.40.3:C15
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.

8.40.3:C16
Updated pre-installed Mozilla CA-certificates to versions available at 20190122.

8.40.3:C17
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.

8.40.3:C18
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

8.40.3:C19
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

8.40.3:C20
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

8.40.3:C21
Increased user awareness when converting legacy overlays to dynamic overlays. A
restart of ongoing recordings is required after overlay conversion.

8.40.3:C22
Improved the certificate management system: It is now possible to upload PKCS#12
certificates with a total size of 102400 bytes. The previous limit was 1/10 of it.

8.40.3:C23
Improved the certificate management system: added support for certificate IDs with long
names.

8.40.3:C24
Improved the certificate management system: added system log information for failing
certificate upload.

8.40.3:C25
Corrected an issue that caused SMB connection problems to NetApp NAS configured for SMBv2.

8.40.3:C26
Improved robustness of the O3C client.

8.40.3:C27
Added information about Certificate ID to the Installed Certificates section in the server
report.

8.40.3:C28
Added GOP Length option to the Stream Profile Settings.

8.40.3:C29
Improved re-connection behavior to AVHS server. The time between failed connection
attempts will now gradually increase until a hard limit is reached.

↧
↧

AXIS Q6074-E, version 9.40.1.3

October 28, 2019, 4:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.40.1.3
================================================================================

9.40.1.3:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1.3:F2
Added support for search functionality in help files.

9.40.1.3:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1.3:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1.3:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1.3:F6
The video stream is now paused by default when accessing the product through the
web-interface in order to save network bandwidth.

9.40.1.3:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1.3:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1.3:F9
Added support for "Wait at least time x" before re-running a configured action
rule.

9.40.1.3:F10
Updated Video Motion Detection to version 4.4.0.

9.40.1.3:F11
Updated Motion Guard to version 2.2.0.

9.40.1.3:F12
Updated Fence Guard to version 2.2.0.

9.40.1.3:F13
Updated Loitering Guard to version 2.2.0


Corrections in 9.40.1.3
================================================================================

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

↧

AXIS Q3709-PVE, version 5.75.1.11

September 25, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.75.1.11 since 5.75.1.10
=========================================

5.75.1.11:C01
Removed the root users default password in factory defaulted firmware. The password of
the root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.

↧
Search

AXIS P7701, version 5.07.6

October 24, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

RELEASE 5.07.6
==============

5.07.6 is a production service release for AXIS P7701. This service release
removes the root user's default password in factory defaulted firmware.

The password of the root user must be set first in order to initialize VAPIX
and ONVIF interfaces to allow further configuration.

This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by
this update until factory defaulted.

↧

AXIS P8221, version 5.10.4

October 28, 2019, 4:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

RELEASE 5.10.4
==============


Corrections since 5.10.3
========================

5.10.4:C01 This is a production service release.
This release removes the root user's default password in factory defaulted firmware.

The password of the root user must be set first in order to initialize VAPIX
and ONVIF interfaces to allow further configuration.

This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by
this update until factory defaulted.

↧
↧

AXIS Q8742-LE_Zoom, version 7.15.5

November 4, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.15.5
================================================================================

7.15.5:F1
Removed the root user's default password in factory defaulted firmware.
The password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration. This change only affects
products in its factory defaulted state, products that are already deployed in
production systems are not affected by this update until factory defaulted.


Corrections in 7.15.5
================================================================================

7.15.5:C1
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

↧

AXIS Q8742-LE, version 7.15.5

November 4, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.15.5
================================================================================

7.15.5:F1
Removed the root user's default password in factory defaulted firmware.
The password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration. This change only affects
products in its factory defaulted state, products that are already deployed in
production systems are not affected by this update until factory defaulted.


Corrections in 7.15.5
================================================================================

7.15.5:C1
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

↧

AXIS Q8742-E_Zoom, version 7.15.5

November 4, 2019, 3:00 pm
$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.15.5
================================================================================

7.15.5:F1
Removed the root user's default password in factory defaulted firmware.
The password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration. This change only affects
products in its factory defaulted state, products that are already deployed in
production systems are not affected by this update until factory defaulted.


Corrections in 7.15.5
================================================================================

7.15.5:C1
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

↧
Viewing all 9476 articles
Browse latest View live
Search