This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features
============
5.90.1.1:F1
Firmware 5.60 extends the ACAP SDK which gives new possibilities to develop
ACAPs. It is also possible to enable multiple ACAP applications to run
simultaneously.
5.90.1.1:F2
Extended SNMP with AXIS Video MIB (Management Information Base). Enables
notification of a number of possible disruptions in Axis Products e.g. fan
failure, temperature limits, storage disruptions, tampering, video/audio
connectors disconnect, via SNMP traps. Available traps depend on the Axis
product.
A MIB is released for Axis products more information available at:
http://www.axis.com/techsup/software/index.htm.
5.90.1.1:F3
Auto-format an SD card to a specified file system upon insertion. This will
allow easy installation of a new SD card that will be formatted automatically
to a preselected file system, mounted and then recording will be resumed.
5.90.1.1:F4
Edge Storage recording makes it possible to indicate e.g. on the Live View,
that an edge storage recording is ongoing. This allows the operator to be
notified if a recording is ongoing or not.
5.90.1.1:F5
The Live View page is updated with responsive design and scales with different
screen resolutions and browser window sizes. This will allow the user to see
the complete page without the need to scroll.
5.90.1.1:F6
For all megapixel products, a new default viewing profile for HDTV resolution
has been added. This viewing profile is visible in the Live View and is
beneficial for demonstration purposes.
5.90.1.1:F7
The Export Video Clip capability enables the export of recordings directly from
the camera to a PC or a smartphone. Select a portion of an Edge Storage
recording from your camera and export as a playable video file to a client. The
exported recording will be one playable Matroska file.
5.90.1.1:F8
SSH command line interface to the products that may be used for specific
support and maintenance activities was introduced in 5.50. SSH is now the only
supported protocol to establish a connection and telnet is not supported. SSH
is not enabled by default but can be activated by an API.
5.90.1.1:F9
Secure FTP (SFTP) is now supported for a more secure file transfer method.
5.90.1.1:F10
Edge Storage robustness is improved with features to detect and repair faults
due to unexpected loss of storage media.
5.90.1.1:F11
Storage limit offers a possibility to control how much storage space may be
used for recordings. This is available via VAPIX.
5.90.1.1:F12
Axis network cameras now support NAS drives over 2TB.
5.90.1.1:F13
Storage manager now collects information about SD card usage.
5.90.1.1:F14
AXIS Video Motion Detection 3, which includes Axis False Alarm Filtering, is
now a pre-installed ACAP application and replaces the built-in Motion Detection
in the product Web GUI. The built-in Motion Detection is still available via
VAPIX.
Axis strongly recommends current users of the Motion Detection API to plan for
transfer to the AXIS Video Motion Detection 3 API, please see the VAPIX
Library.
5.90.1.1:F15
Available ONVIF Media Profiles are now presented and configurable using the
product Web GUI.
5.90.1.1:F16
With SD card Encryption it is now possible to enable encryption of the SD card
to protect your data. This encryption is transparent to users and VMS solutions
making it possible to activate without adaptations.
This feature is presented and configurable both in the Web GUI and via VAPIX.
5.90.1.1:F17
Improved start-up time.
5.90.1.1:F18
Edge storage recording robustness is improved with an automatic database repair
feature.
5.90.1.1:F19
Max exposure time parameter is now available in the Camera Settings. It can be
used in LPR installations when setting Max exposure time shorter than default
Max shutter time.
5.90.1.1:F20
Support for the NTCIP ACAP.
5.90.1.1:F21
SNMP MIB r/w OID values are saved after reboot.
5.90.1.1:F22
Video overlay text size can now be set for each individual stream profile.
Corrections
============
5.90.1.1:C1
Select "Use Temporary Mode" if during ftp upload temporary files are required.
5.90.1.1:C2
ONVIF users are now handled when PTZ Control Queue is enabled.
5.90.1.1:C3
Removed LLDP-MED logs containing spam.
5.90.1.1:C4
Improved robustness for Axis ACAPs.
5.90.1.1:C5
Improved handling of frequent I/O triggering.
5.90.1.1:C6
When DST is enabled, export recordings can now be done via web interface.
5.90.1.1:C7
Passwords can now contain "#".
5.90.1.1:C8
PullMessages now follow the ONVIF specification 9.1.2.
5.90.1.1:C9
Users with admin permissions can edit ACAP configuration settings.
5.90.1.1:C10
Manual triggers for all enabled View Areas are shown.
5.90.1.1:C11
It is now possible to select starting point when playing back a recording while
using multicast and H.264.
5.90.1.1:C12
To increase robustness, a retry of 10 seconds is added for an action rule. If
action fails it will retry until it succeeds or until the rule is no longer
active.
5.90.1.1:C13
Improved synchronization between sound and video when having low fps and long
GOV length.
5.90.1.1:C14
Proportional pan/tilt speed is now available.
5.90.1.1:C15
Fixed MJPEG over RTP issue for big resolutions.
New features
============
5.90.1.1:F1
Firmware 5.60 extends the ACAP SDK which gives new possibilities to develop
ACAPs. It is also possible to enable multiple ACAP applications to run
simultaneously.
5.90.1.1:F2
Extended SNMP with AXIS Video MIB (Management Information Base). Enables
notification of a number of possible disruptions in Axis Products e.g. fan
failure, temperature limits, storage disruptions, tampering, video/audio
connectors disconnect, via SNMP traps. Available traps depend on the Axis
product.
A MIB is released for Axis products more information available at:
http://www.axis.com/techsup/software/index.htm.
5.90.1.1:F3
Auto-format an SD card to a specified file system upon insertion. This will
allow easy installation of a new SD card that will be formatted automatically
to a preselected file system, mounted and then recording will be resumed.
5.90.1.1:F4
Edge Storage recording makes it possible to indicate e.g. on the Live View,
that an edge storage recording is ongoing. This allows the operator to be
notified if a recording is ongoing or not.
5.90.1.1:F5
The Live View page is updated with responsive design and scales with different
screen resolutions and browser window sizes. This will allow the user to see
the complete page without the need to scroll.
5.90.1.1:F6
For all megapixel products, a new default viewing profile for HDTV resolution
has been added. This viewing profile is visible in the Live View and is
beneficial for demonstration purposes.
5.90.1.1:F7
The Export Video Clip capability enables the export of recordings directly from
the camera to a PC or a smartphone. Select a portion of an Edge Storage
recording from your camera and export as a playable video file to a client. The
exported recording will be one playable Matroska file.
5.90.1.1:F8
SSH command line interface to the products that may be used for specific
support and maintenance activities was introduced in 5.50. SSH is now the only
supported protocol to establish a connection and telnet is not supported. SSH
is not enabled by default but can be activated by an API.
5.90.1.1:F9
Secure FTP (SFTP) is now supported for a more secure file transfer method.
5.90.1.1:F10
Edge Storage robustness is improved with features to detect and repair faults
due to unexpected loss of storage media.
5.90.1.1:F11
Storage limit offers a possibility to control how much storage space may be
used for recordings. This is available via VAPIX.
5.90.1.1:F12
Axis network cameras now support NAS drives over 2TB.
5.90.1.1:F13
Storage manager now collects information about SD card usage.
5.90.1.1:F14
AXIS Video Motion Detection 3, which includes Axis False Alarm Filtering, is
now a pre-installed ACAP application and replaces the built-in Motion Detection
in the product Web GUI. The built-in Motion Detection is still available via
VAPIX.
Axis strongly recommends current users of the Motion Detection API to plan for
transfer to the AXIS Video Motion Detection 3 API, please see the VAPIX
Library.
5.90.1.1:F15
Available ONVIF Media Profiles are now presented and configurable using the
product Web GUI.
5.90.1.1:F16
With SD card Encryption it is now possible to enable encryption of the SD card
to protect your data. This encryption is transparent to users and VMS solutions
making it possible to activate without adaptations.
This feature is presented and configurable both in the Web GUI and via VAPIX.
5.90.1.1:F17
Improved start-up time.
5.90.1.1:F18
Edge storage recording robustness is improved with an automatic database repair
feature.
5.90.1.1:F19
Max exposure time parameter is now available in the Camera Settings. It can be
used in LPR installations when setting Max exposure time shorter than default
Max shutter time.
5.90.1.1:F20
Support for the NTCIP ACAP.
5.90.1.1:F21
SNMP MIB r/w OID values are saved after reboot.
5.90.1.1:F22
Video overlay text size can now be set for each individual stream profile.
Corrections
============
5.90.1.1:C1
Select "Use Temporary Mode" if during ftp upload temporary files are required.
5.90.1.1:C2
ONVIF users are now handled when PTZ Control Queue is enabled.
5.90.1.1:C3
Removed LLDP-MED logs containing spam.
5.90.1.1:C4
Improved robustness for Axis ACAPs.
5.90.1.1:C5
Improved handling of frequent I/O triggering.
5.90.1.1:C6
When DST is enabled, export recordings can now be done via web interface.
5.90.1.1:C7
Passwords can now contain "#".
5.90.1.1:C8
PullMessages now follow the ONVIF specification 9.1.2.
5.90.1.1:C9
Users with admin permissions can edit ACAP configuration settings.
5.90.1.1:C10
Manual triggers for all enabled View Areas are shown.
5.90.1.1:C11
It is now possible to select starting point when playing back a recording while
using multicast and H.264.
5.90.1.1:C12
To increase robustness, a retry of 10 seconds is added for an action rule. If
action fails it will retry until it succeeds or until the rule is no longer
active.
5.90.1.1:C13
Improved synchronization between sound and video when having low fps and long
GOV length.
5.90.1.1:C14
Proportional pan/tilt speed is now available.
5.90.1.1:C15
Fixed MJPEG over RTP issue for big resolutions.