AXIS Q1942-EX, version 6.55.1.1

July 9, 2017, 3:00 pm

≫ Next: AXIS ACR, version 1.11.1.1

≪ Previous: AXIS M3105-L, version 7.20.1.1

↧

AXIS ACR, version 1.11.1.1

July 9, 2017, 3:00 pm

≫ Next: AXIS M3104-L, version 7.20.1.1

≪ Previous: AXIS Q1942-EX, version 6.55.1.1

↧

AXIS M3104-L, version 7.20.1.1

July 5, 2017, 3:00 pm

≫ Next: AXIS M3037, version 5.75.1.4

≪ Previous: AXIS ACR, version 1.11.1.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 7.20.1.1 since 7.20.1
====================================

7.20.1.1:C1
The image orientation now behaves correctly after a firmware update from 6.15 to 7.20
for ceiling mount configuration.

Note: In the case of a wall mounted camera there is a need to readjust
the rotation of the video stream (from 180 to 0) when upgrading from 6.15 to 7.20.

↧

AXIS M3037, version 5.75.1.4

July 10, 2017, 3:00 pm

≫ Next: AXIS A8105-E, version 1.65.1

≪ Previous: AXIS M3104-L, version 7.20.1.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 5.75.1.4 since 5.75.1.3
======================================

5.75.1.4:C01
Fixed audio configuration issue causing problem when streaming/recording with sound enabled.

↧

AXIS A8105-E, version 1.65.1

June 14, 2017, 3:00 pm

≫ Next: AXIS P3228, version 7.15.1.1

≪ Previous: AXIS M3037, version 5.75.1.4

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.65.1 since 1.58.2.1
===================================

1.65.1:F1
SIP Registration Interval can now be modified to a value between 1 second and
36000 seconds. Default value is 300 seconds.

1.65.1:F2
It is now possible to repeat audio clips in the event setup.

1.65.1:F3
SIP Accounts can now be enabled and disabled.

1.65.1:F4
Configuring a secondary SIP server (Registrar and PublicDomain) is now
supported. If the primary SIP server is down the device will fallback to the
secondary server.

1.65.1:F5
The maximum duration for SIP calls can now be configured.

1.65.1:F6
Audioclips in mp3 format with a sample rate of 16kHz are now supported.

1.65.1:F7
Relays and outputs are now supported as trigger actions in the Events setup.

Corrections in 1.65.1 since 1.58.2.1
==================================

1.65.1:C1
Fixed critical vulnerability ACV-116267.

1.65.1:C2
Fixed Axis Door Controller Recipient to retrieve doors in an Action Rule

1.65.1:C3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

1.65.1:C4
Fixed Security vulnerability CVE-2016-5195.

1.65.1:C5
Fixed security vulnerability CVE-2015-7547

↧

AXIS P3228, version 7.15.1.1

July 9, 2017, 3:00 pm

≫ Next: AXIS P3227, version 7.15.1.1

≪ Previous: AXIS A8105-E, version 1.65.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 7.15.1.1 since 7.15.1
======================================

7.15.1.1:C01
Fixed critical vulnerability ACV-116267.

7.15.1.1:C02
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.15.1.1:C03
Support for adaptive resolution. Adaptive resolution is enabled per default and
takes only effect when watching live stream in the web-interface. The viewing client
will receive a image resolution that is adapted or close to the viewing clients real
display resolution to higher the user experience.

↧

AXIS P3227, version 7.15.1.1

July 9, 2017, 3:00 pm

≫ Next: AXIS F34, version 6.50.1.3

≪ Previous: AXIS P3228, version 7.15.1.1

↧

AXIS F34, version 6.50.1.3

July 11, 2017, 3:00 pm

≫ Next: AXIS Q3505-Mk_II, version 6.25.2.6

≪ Previous: AXIS P3227, version 7.15.1.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 6.50.1.3 since 6.50.1.2
======================================

6.50.1.3:C01
Corrected a bug that prevented the user from seeing the ACAP running status and re-added the Main Page link
to open a ACAP in the web-interface under Setup -> Applications.

6.50.1.3:C02
Corrected a bug that resulted in â503 Service Unavailableâ when trying to play a recording
from a camera with a specific time range via ONVIF.

6.50.1.3:C03
Corrected a bug that let the camera send corrupted XML data packages within a stream
which caused a VMS (e.g. ACS) to not record video motion detection coming from the camera.
Mostly happens during initial boot-up after production and can be solved by a flash_all or via this correction.

6.50.1.3:C04
Corrected a bug that added an additional sign â/â in the absolute upload path of an SFTP Recipient
when saving the action rule causing it to not work correctly.

6.50.1.3:C05
Fixed memory leak that affected parameter handling.

6.50.1.3:C06
Fixed memory leak that affected e.g. ONVIF request.

6.50.1.3:C07
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.

↧

AXIS Q3505-Mk_II, version 6.25.2.6

July 18, 2017, 3:00 pm

≫ Next: AXIS Q1615Mk_II, version 6.25.2.7

≪ Previous: AXIS F34, version 6.50.1.3

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 6.25.2.6 since 6.25.2.5
======================================

6.25.2.6:C01
Fixed an issue that printed critical log messages during the boot-up of the product.

↧

AXIS Q1615Mk_II, version 6.25.2.7

July 18, 2017, 3:00 pm

≫ Next: AXIS A1001, version 1.60.0

≪ Previous: AXIS Q3505-Mk_II, version 6.25.2.6

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 6.25.2.7 since 6.25.2.6
======================================

6.25.2.7:C01
Fixed an issue that printed critical log messages during the boot-up of the product.

↧

AXIS A1001, version 1.60.0

July 27, 2017, 3:00 pm

≫ Next: AXIS P1368-E, version 7.15.1.1

≪ Previous: AXIS Q1615Mk_II, version 6.25.2.7

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New Features
============

1.60.0:F01
HID Mobile Acceess. An IP-based Mobile Access control using trusted identities
on smartphones for opening doors and locks instead of managing traditional
printed identity credentials. See user manual for more information.

1.60.0:F02
Additional support for wireless locks with Simons Voss Smart Intego.
A Smart Intego GatewayNode can now be connected to the A1001 over Ethernet
having it's wireless locks controlled by the acces control rules.
A1001 can be connected to one Gateway that can communicate with up to 16
wireless locks. See user manual for more information.

1.60.0:F03
Conformance to Onvif Profile A.

Corrections in 1.60.0 since 1.57.0.2
=================================

1.60.0:C1
In Entry Manager Date & Time Settings you can only input the IP address of the
ntp server, not the DNS name. DNS name of NTP server can be provided by going
into Additional Controller Configuration > System Options > TCP/IP > Advanced >
NTP Configuration.

1.60.0:C2
Fixed critical vulnerability ACV-116267

1.60.0:C3
COM Ports visible after update

↧

AXIS P1368-E, version 7.15.1.1

July 10, 2017, 3:00 pm

≫ Next: AXIS P1367-E, version 7.15.1.1

≪ Previous: AXIS A1001, version 1.60.0

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

7.15.1.1 is the first official production release for the AXIS P1367-E and P1368-E
=======================================================================================

7.15.1.1:C01
This release include fix for the critical vulnerability ACV-116267.

↧

AXIS P1367-E, version 7.15.1.1

July 10, 2017, 3:00 pm

≫ Next: AXIS P1367, version 7.15.1.1

≪ Previous: AXIS P1368-E, version 7.15.1.1

↧

AXIS P1367, version 7.15.1.1

July 10, 2017, 3:00 pm

≫ Next: AXIS M3048-P, version 7.15.2.1

≪ Previous: AXIS P1367-E, version 7.15.1.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

7.15.1.1 is the first official production release for the AXIS P1367
================================================================================

This release include fix for the critical vulnerability ACV-116267.

↧

AXIS M3048-P, version 7.15.2.1

July 18, 2017, 3:00 pm

≫ Next: AXIS M3047-P, version 7.15.2.1

≪ Previous: AXIS P1367, version 7.15.1.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 7.15.2.1 since 7.15.2
======================================

7.15.2.1:C1
Fixed critical vulnerability ACV-116267.

7.15.2.1:C2
Apache web server has been updated to version 2.4.25.

7.15.2.1:C3
Corrected issue in area zoom for view areas.

7.15.2.1:C4
Improved image tuning to handle scenes with high dynamic range.

7.15.2.1:C5
Corrected an issue with exporting an ongoing recording event where the stop time
didn't take DST (Daylight Savings Time) in consideration.

7.15.2.1:C6
Corrected issue where HDMI source list is not updated when changing dewarped view.

↧

AXIS M3047-P, version 7.15.2.1

July 18, 2017, 3:00 pm

≫ Next: AXIS ACE-L, version 7.25.1

≪ Previous: AXIS M3048-P, version 7.15.2.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 7.15.2.1 since 7.15.2
======================================

7.15.2.1:C1
Fixed critical vulnerability ACV-116267.

7.15.2.1:C2
Apache web server has been updated to version 2.4.25.

7.15.2.1:C3
Corrected issue in area zoom for view areas.

7.15.2.1:C4
Improved image tuning to handle scenes with high dynamic range.

7.15.2.1:C5
Corrected an issue with exporting an ongoing recording event where the stop time
didn't take DST (Daylight Savings Time) in consideration.

7.15.2.1:C6
Corrected issue where HDMI source list is not updated when changing dewarped view.

↧

AXIS ACE-L, version 7.25.1

August 28, 2017, 3:00 pm

≫ Next: AXIS ACD-V, version 7.25.1

≪ Previous: AXIS M3047-P, version 7.15.2.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.25.1
======================

7.25.1:F1
The monolith watchdog has been added as emergency recovery feature. Systemd
tries to restart the monolith after being 60s unresponsive in order to re-
establish video streaming functionalities. If restarting the monolith failed
several times, SystemD will stop trying. Log messages when that happens are
added to the system.

7.25.1:F2
Support for LLDP neighbor announcements. Products announce themselves now in the
network via LLDP protocol.

7.25.1:F3
Changed the default web server authentication from Basic & Digest to Digest
only.

7.25.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.25.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support

↧

AXIS ACD-V, version 7.25.1

August 28, 2017, 3:00 pm

≫ Next: AXIS ACC-L, version 7.25.1

≪ Previous: AXIS ACE-L, version 7.25.1

↧

AXIS ACC-L, version 7.25.1

August 28, 2017, 3:00 pm

≫ Next: AXIS ACB-LE, version 7.25.1

≪ Previous: AXIS ACD-V, version 7.25.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.25.1
======================

7.25.1:F1
The monolith watchdog has been added as emergency recovery feature. Systemd
tries to restart the monolith after being 60s unresponsive in order to re-
establish video streaming functionalities. If restarting the monolith failed
several times, SystemD will stop trying. Log messages when that happens are
added to the system.

7.25.1:F2
Support for LLDP neighbor announcements. Products announce themselves now in the
network via LLDP protocol.

7.25.1:F3
Changed the default web server authentication from Basic & Digest to Digest
only.

7.25.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.25.1:F5
Support for recordings with G711 Âµ-law audio encoding.

7.25.1:F6
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support

↧

AXIS ACB-LE, version 7.25.1

August 28, 2017, 3:00 pm

≫ Next: AXIS M3025, version 5.50.5.11

≪ Previous: AXIS ACC-L, version 7.25.1

↧