Axis Communications Firmware

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F5
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F6
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F7
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F8
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Added ONVIF GetVideoEncoderConfigurationOptions extension. This makes it
possible for an ONVIF client to get e.g. the bitrate range of the camera.

7.20.1:F2
The Axis On Screen Crontrols add-on makes it possible for Axis Camera Station
(ACS) or a VMS to get information about various features of the camera. This
information is available through a JSON API via a CGI.

7.20.1:F3
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F4
The former user group selections for HTTPS Connection Policy (administrator,
operator, viewer) have been merged to one single HTTPS Connection Policy.

7.20.1:F5
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F6
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F7
It is now possible to specify image rotation via ONVIF video source
configuration

7.20.1:F8
Support for LLDP neighbor announcements. Products announce themselves now in the
network via LLDP protocol.

7.20.1:F9
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F10
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.20.1:F11
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F12
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Corrected an issue that let the camera become unresponsive in rare occasions.

7.30.1:C3
The camera is now starting its IR illumination when booting up in a low light
environment. Previously the IR lights did not start even though they were
enabled.

7.30.1:C4
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C5
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C7
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C8
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Improved handling of streaming via RTSP over TCP.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Improved loading of the web-interface in unstable networks.

7.20.1:C4
Fixed an issue resulting in that HTTP notification action rules stopped retrying
from contacting the receiving server after a failed attempt.

7.20.1:C5
It is now possible to encrypt SD card in Mozilla Firefox.

7.20.1:C6
Improved camera stability when TriggerData is used.

7.20.1:C7
Corrected an issue in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.20.1:C8
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C9
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C10
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C11
Fixed critical vulnerability ACV-116267.

7.20.1:C12
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.20.1:C13
Optimized Network Share polling frequency.

7.20.1:C14
Improved stability in actionengine (tcp notification).

7.20.1:C15
Improved camera stability when recording via ONVIF profile G.

7.20.1:C16
Fixed Security vulnerability CVE-2016-5195.

7.20.1:C17
Improved handling of day and night shift levels adjustment.

7.20.1:C18
Improved HTTP image upload stability in unstable networks.

7.20.1:C19
Improved camera stability when metadata is used.

7.20.1:C20
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F5
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F6
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F7
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F8
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F9
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Added ONVIF GetVideoEncoderConfigurationOptions extension. This makes it
possible for an ONVIF client to get e.g. the bitrate range of the camera.

7.20.1:F2
The Axis On Screen Crontrols add-on makes it possible for Axis Camera Station
(ACS) or a VMS to get information about various features of the camera. This
information is available through a JSON API via a CGI.

7.20.1:F3
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F4
The former user group selections for HTTPS Connection Policy (administrator,
operator, viewer) have been merged to one single HTTPS Connection Policy.

7.20.1:F5
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F6
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F7
It is now possible to specify image rotation via ONVIF video source
configuration

7.20.1:F8
Support for LLDP neighbor announcements. Products announce themselves now in the
network via LLDP protocol.

7.20.1:F9
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F10
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.20.1:F11
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F12
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
The camera is now starting its IR illumination when booting up in a low light
environment. Previously the IR lights did not start even though they were
enabled.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C9
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C10
Corrected security vulnerability CVE-2016-2147.

7.30.1:C11
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Improved handling of streaming via RTSP over TCP.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Improved loading of the web-interface in unstable networks.

7.20.1:C4
Fixed an issue resulting in that HTTP notification action rules stopped retrying
from contacting the receiving server after a failed attempt.

7.20.1:C5
It is now possible to encrypt SD card in Mozilla Firefox.

7.20.1:C6
Improved camera stability when TriggerData is used.

7.20.1:C7
Corrected an issue in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.20.1:C8
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C9
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C10
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C11
Fixed critical vulnerability ACV-116267.

7.20.1:C12
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.20.1:C13
Optimized Network Share polling frequency.

7.20.1:C14
Improved stability in actionengine (tcp notification).

7.20.1:C15
Improved camera stability when recording via ONVIF profile G.

7.20.1:C16
Fixed Security vulnerability CVE-2016-5195.

7.20.1:C17
Improved handling of day and night shift levels adjustment.

7.20.1:C18
Improved HTTP image upload stability in unstable networks.

7.20.1:C19
Improved camera stability when metadata is used.

7.20.1:C20
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 6.15.6.1
================================================================================

7.30.1:F1
Added ONVIF GetVideoEncoderConfigurationOptions extension. This makes it
possible for an ONVIF client to get e.g. the bitrate range of the camera.

7.30.1:F2
It is now possible to specify image rotation via ONVIF video source
configuration

7.30.1:F3
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F4
Support for LLDP neighbor announcements. Products announce themselves now in the
network via LLDP protocol.

7.30.1:F5
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.30.1:F6
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.30.1:F7
Changed the default web server authentication from Basic & Digest to Digest
only.

7.30.1:F8
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F9
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.30.1:F10
The Axis On Screen Crontrols add-on makes it possible for Axis Camera Station
(ACS) or a VMS to get information about various features of the camera. This
information is available through a JSON API via a CGI.

7.30.1:F11
The former user group selections for HTTPS Connection Policy (administrator,
operator, viewer) have been merged to one single HTTPS Connection Policy.

7.30.1:F12
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.30.1:F13
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F14
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F15
It is now possible to add hidden wireless networks via SSID manually.

7.30.1:F16
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F17
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F18
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F19
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.

7.30.1:F20
Added support for ONVIF standardised I/O events.

7.30.1:F21
Corrected behavior for conditional triggers.

7.30.1:F22
Improved handling for networks with small MTU values.

7.30.1:F23
Improved Zipstream using dynamic frame rate.

7.30.1:F24
Support for ONVIF Profile G.

Corrections in 7.30.1 since 6.15.6.1
================================================================================

7.30.1:C1
Corrected handling of #D text overlay, it's no longer needed to specify the
camera source.

7.30.1:C2
Improvements in session ID handling for rtsp streaming. Useful when streaming in
some video clients.

7.30.1:C3
Added link local IPV6 support for NTP.

7.30.1:C4
Fixed Security vulnerability CVE-2016-5195.

7.30.1:C5
Improved handling of day and night shift levels adjustment.

7.30.1:C6
Improved HTTP image upload stability in unstable networks.

7.30.1:C7
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.30.1:C8
Improved camera stability when metadata is used.

7.30.1:C9
Improved recording stability towards Axis Companion Recorder.

7.30.1:C10
Corrected an issue that made the overlay text disappear when a client requested
a new video stream.

7.30.1:C11
Corrected an issue that let the camera become unresponsive in rare occasions.

7.30.1:C12
Corrected an issue in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.30.1:C13
The camera is now starting its IR illumination when booting up in a low light
environment. Previously the IR lights did not start even though they were
enabled.

7.30.1:C14
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C15
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C16
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C17
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C18
Corrected security vulnerability CVE-2016-2147.

7.30.1:C19
Corrected critical vulnerability ACV-120444.

7.30.1:C20
Switch to turn off the network traffic LED now works.

7.30.1:C21
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.30.1:C22
Fixed issues with stopped events for manually triggered recording.

7.30.1:C23
Date format now displayed correctly in ACM.

7.30.1:C24
Optimized Network Share polling frequency.

7.30.1:C25
Improved stability in actionengine (tcp notification).

7.30.1:C26
Improved camera stability when recording via ONVIF profile G.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F5
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F6
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F7
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F8
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Added ONVIF GetVideoEncoderConfigurationOptions extension. This makes it
possible for an ONVIF client to get e.g. the bitrate range of the camera.

7.20.1:F2
The Axis On Screen Crontrols add-on makes it possible for Axis Camera Station
(ACS) or a VMS to get information about various features of the camera. This
information is available through a JSON API via a CGI.

7.20.1:F3
Support for 24bit LPCM audio mode.

7.20.1:F4
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F5
The former user group selections for HTTPS Connection Policy (administrator,
operator, viewer) have been merged to one single HTTPS Connection Policy.

7.20.1:F6
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F7
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F8
Support for recordings with G711 Âµ-law audio encoding.

7.20.1:F9
It is now possible to specify image rotation via ONVIF video source
configuration

7.20.1:F10
Support for LLDP neighbor announcements. Products announce themselves now in the
network via LLDP protocol.

7.20.1:F11
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F12
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.20.1:F13
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F14
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Corrected an issue that let the camera become unresponsive in rare occasions.

7.30.1:C3
The camera is now starting its IR illumination when booting up in a low light
environment. Previously the IR lights did not start even though they were
enabled.

7.30.1:C4
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C5
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C7
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C8
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Improved handling of streaming via RTSP over TCP.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Improved loading of the web-interface in unstable networks.

7.20.1:C4
Fixed an issue resulting in that HTTP notification action rules stopped retrying
from contacting the receiving server after a failed attempt.

7.20.1:C5
It is now possible to encrypt SD card in Mozilla Firefox.

7.20.1:C6
Improved camera stability when TriggerData is used.

7.20.1:C7
Corrected an issue in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.20.1:C8
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C9
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C10
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C11
Fixed critical vulnerability ACV-116267.

7.20.1:C12
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.20.1:C13
Optimized Network Share polling frequency.

7.20.1:C14
Improved stability in actionengine (tcp notification).

7.20.1:C15
Improved camera stability when recording via ONVIF profile G.

7.20.1:C16
Fixed Security vulnerability CVE-2016-5195.

7.20.1:C17
Improved handling of day and night shift levels adjustment.

7.20.1:C18
Improved HTTP image upload stability in unstable networks.

7.20.1:C19
Improved camera stability when metadata is used.

7.20.1:C20
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 6.15.6.1
================================================================================

7.30.1:F1
Added ONVIF GetVideoEncoderConfigurationOptions extension. This makes it
possible for an ONVIF client to get e.g. the bitrate range of the camera.

7.30.1:F2
It is now possible to specify image rotation via ONVIF video source
configuration

7.30.1:F3
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F4
Support for LLDP neighbor announcements. Products announce themselves now in the
network via LLDP protocol.

7.30.1:F5
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.30.1:F6
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.30.1:F7
Changed the default web server authentication from Basic & Digest to Digest
only.

7.30.1:F8
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F9
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.30.1:F10
The Axis On Screen Crontrols add-on makes it possible for Axis Camera Station
(ACS) or a VMS to get information about various features of the camera. This
information is available through a JSON API via a CGI.

7.30.1:F11
The former user group selections for HTTPS Connection Policy (administrator,
operator, viewer) have been merged to one single HTTPS Connection Policy.

7.30.1:F12
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.30.1:F13
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F14
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F15
It is now possible to add hidden wireless networks via SSID manually.

7.30.1:F16
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F17
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F18
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F19
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.

7.30.1:F20
Added support for ONVIF standardised I/O events.

7.30.1:F21
Corrected behavior for conditional triggers.

7.30.1:F22
Improved handling for networks with small MTU values.

7.30.1:F23
Improved Zipstream using dynamic frame rate.

7.30.1:F24
Support for ONVIF Profile G.

Corrections in 7.30.1 since 6.15.6.1
================================================================================

7.30.1:C1
Corrected handling of #D text overlay, it's no longer needed to specify the
camera source.

7.30.1:C2
Improvements in session ID handling for rtsp streaming. Useful when streaming in
some video clients.

7.30.1:C3
Added link local IPV6 support for NTP.

7.30.1:C4
Fixed Security vulnerability CVE-2016-5195.

7.30.1:C5
Improved handling of day and night shift levels adjustment.

7.30.1:C6
Improved HTTP image upload stability in unstable networks.

7.30.1:C7
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.30.1:C8
Improved camera stability when metadata is used.

7.30.1:C9
Improved recording stability towards Axis Companion Recorder.

7.30.1:C10
Corrected an issue that made the overlay text disappear when a client requested
a new video stream.

7.30.1:C11
Corrected an issue that let the camera become unresponsive in rare occasions.

7.30.1:C12
Corrected an issue in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.30.1:C13
The camera is now starting its IR illumination when booting up in a low light
environment. Previously the IR lights did not start even though they were
enabled.

7.30.1:C14
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C15
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C16
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C17
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C18
Corrected security vulnerability CVE-2016-2147.

7.30.1:C19
Corrected critical vulnerability ACV-120444.

7.30.1:C20
Switch to turn off the network traffic LED now works.

7.30.1:C21
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.30.1:C22
Fixed issues with stopped events for manually triggered recording.

7.30.1:C23
Date format now displayed correctly in ACM.

7.30.1:C24
Optimized Network Share polling frequency.

7.30.1:C25
Improved stability in actionengine (tcp notification).

7.30.1:C26
Improved camera stability when recording via ONVIF profile G.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F5
Support for day / night shift level adjustment.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C8
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C9
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C10
Corrected security vulnerability CVE-2016-2147.

7.30.1:C11
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved stability in actionengine (tcp notification).

7.10.1:C2
Improved handling of day and night shift levels adjustment.

7.10.1:C3
Improved HTTP image upload stability in unstable networks.

7.10.1:C4
Improved camera stability when metadata is used.

7.10.1:C5
Correct PTZ status is shown when pressing the PTZ test button.

7.10.1:C6
Improved loading of the web-interface in unstable networks.

7.10.1:C7
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C8
Improved camera stability when TriggerData is used.

7.10.1:C9
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Corrected a bug that let the camera stuck in night mode when the light changes
in the scene are huge.

7.20.1:C6
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C7
Fixed critical vulnerability ACV-116267.

7.20.1:C8
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Corrected a bug that let the camera stuck in night mode when the light changes
in the scene are huge.

7.20.1:C6
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C7
Fixed critical vulnerability ACV-116267.

7.20.1:C8
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F5
Support for day / night shift level adjustment.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved stability in actionengine (tcp notification).

7.10.1:C2
Improved handling of day and night shift levels adjustment.

7.10.1:C3
Improved HTTP image upload stability in unstable networks.

7.10.1:C4
Improved camera stability when metadata is used.

7.10.1:C5
Correct PTZ status is shown when pressing the PTZ test button.

7.10.1:C6
Improved loading of the web-interface in unstable networks.

7.10.1:C7
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C8
Improved camera stability when TriggerData is used.

7.10.1:C9
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F5
Support for day / night shift level adjustment.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved stability in actionengine (tcp notification).

7.10.1:C2
Improved handling of day and night shift levels adjustment.

7.10.1:C3
Improved HTTP image upload stability in unstable networks.

7.10.1:C4
Improved camera stability when metadata is used.

7.10.1:C5
Correct PTZ status is shown when pressing the PTZ test button.

7.10.1:C6
Improved loading of the web-interface in unstable networks.

7.10.1:C7
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C8
Improved camera stability when TriggerData is used.

7.10.1:C9
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved handling of day and night shift levels adjustment.

7.10.1:C2
Improved HTTP image upload stability in unstable networks.

7.10.1:C3
Improved camera stability when metadata is used.

7.10.1:C4
Improved loading of the web-interface in unstable networks.

7.10.1:C5
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C6
Improved camera stability when TriggerData is used.

7.10.1:C7
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C8
Improved stability in actionengine (tcp notification).

AXIS M2026-LE, version 7.30.1

AXIS M2025-LE, version 7.30.1

AXIS M1065-LW, version 7.30.1

AXIS M1065-L, version 7.30.1

AXIS M1045-LW, version 7.30.1

AXIS ACC-LW, version 7.30.1

AXIS ACC-L, version 7.30.1

AXIS ACB-LE, version 7.30.1

AXIS Q6155-E, version 7.30.1

AXIS Q6055-S, version 7.30.1

AXIS Q6055-E, version 7.30.1

AXIS Q6055-C, version 7.30.1

AXIS Q6055, version 7.30.1

AXIS Q6054-E, version 7.30.1

AXIS Q6054, version 7.30.1

AXIS Q6052-E, version 7.30.1

AXIS Q6052, version 7.30.1

AXIS P5635-E-Mk_II, version 7.30.1

AXIS P5624-E-Mk_II, version 7.30.1

AXIS P5515-E, version 7.30.1