Axis Communications Firmware

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 6.50.1.3 since 6.50.1.2
======================================

6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.

6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.

6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.

6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.

6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.

6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".

6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.

6.50.1.3:C12
Improved connection handling with Honeywell applications.

6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.

6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.

6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.

6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.

6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.

6.50.1.3:C19
Corrected critical vulnerability ACV-120444.

6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.

6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.35.1
================================================================================

7.35.1:F1
Added ONVIF GetVideoEncoderConfigurationOptions extension. This makes it
possible for an ONVIF client to get e.g. the bitrate range of the camera.

7.35.1:F2
It is now possible to specify image rotation via ONVIF video source
configuration

7.35.1:F3
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.35.1:F4
Support for LLDP neighbor announcements. Products announce themselves now in the
network via LLDP protocol.

7.35.1:F5
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.35.1:F6
Support for AXIS Audio Streaming Capabilities API for better handling of product
supported audio streaming settings. The API allows a client to request all the
product supported audio stream settings and its combinations e.g. audio codecs,
sample and bit rates as well as channels.

7.35.1:F7
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.35.1:F8
The ARP/Ping method to set the products ip-address has been removed in order to
increase minimum cyber security standards.

7.35.1:F9
Changed the default web server authentication from Basic & Digest to Digest
only.

7.35.1:F10
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.35.1:F11
The Axis On Screen Crontrols add-on makes it possible for Axis Camera Station
(ACS) or a VMS to get information about various features of the camera. This
information is available through a JSON API via a CGI.

7.35.1:F12
Apache web server has been updated to version 2.4.25.

7.35.1:F13
Support for 24bit LPCM audio mode.

7.35.1:F14
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.35.1:F15
The former user group selections for HTTPS Connection Policy (administrator,
operator, viewer) have been merged to one single HTTPS Connection Policy.

7.35.1:F16
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.35.1:F17
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.35.1:F18
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.35.1:F19
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.

7.35.1:F20
Added support for ONVIF standardised I/O events.

7.35.1:F21
TCP Keepalive options is available.

7.35.1:F22
Support for recordings with G711 µ-law audio encoding.

7.35.1:F23
Corrected behavior for conditional triggers.

7.35.1:F24
Improved handling for networks with small MTU values.

7.35.1:F25
Improved Zipstream using dynamic frame rate.

7.35.1:F26
Support for ONVIF Profile G.

Corrections in 7.35.1
================================================================================

7.35.1:C1
Corrected handling of #D text overlay, it's no longer needed to specify the
camera source.

7.35.1:C2
Improvements in session ID handling for rtsp streaming. Useful when streaming in
some video clients.

7.35.1:C3
Fixed an issue that caused the product to stop streaming when TUN/TAP interfaces
are enabled and MJPEG is accessed over P2P connections such as a VPN.

7.35.1:C4
Added link local IPV6 support for NTP.

7.35.1:C5
Improved HTTP image upload stability in unstable networks.

7.35.1:C6
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.35.1:C7
Improved camera stability when metadata is used.

7.35.1:C8
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.35.1:C9
Running http://ip /incl/bw to get to know the network bandwidth does require
login credentials now. Improved Cyber Security.

7.35.1:C10
Corrected a bug that denied the access to the camera when AXIS Companion /
Remote Access is used when web server connection policy was set to "HTTPS only".

7.35.1:C11
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS (e.g. ACS) to not record video motion detection coming
from the camera. Mostly happens during initial boot-up after production and can
be solved by a flash_all or via this correction.

7.35.1:C12
Corrected Content-Type in pwdgrp.cgi response.

7.35.1:C13
Improved camera stability when TriggerData is used.

7.35.1:C14
Corrected an issue in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.35.1:C15
Corrected a issue resulting in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.

7.35.1:C16
Corrected an issue with an additional sign / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.35.1:C17
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.

7.35.1:C18
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.35.1:C19
Fixed issues with stopped events for manually triggered recording.

7.35.1:C20
Optimized Network Share polling frequency.

7.35.1:C21
Improved stability in actionengine (tcp notification).

7.35.1:C22
Improved camera stability when recording via ONVIF profile G.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F5
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F6
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F7
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F8
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F9
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F2
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F3
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F4
Support for 24bit LPCM audio mode.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F7
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved handling of day and night shift levels adjustment.

7.10.1:C2
Improved HTTP image upload stability in unstable networks.

7.10.1:C3
Improved camera stability when metadata is used.

7.10.1:C4
Improved loading of the web-interface in unstable networks.

7.10.1:C5
Improved camera stability when TriggerData is used.

7.10.1:C6
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C7
Improved stability in actionengine (tcp notification).

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Corrected a bug that let the camera stuck in night mode when the light changes
in the scene are huge.

7.20.1:C6
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C7
Fixed critical vulnerability ACV-116267.

7.20.1:C8
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Corrected a bug that let the camera stuck in night mode when the light changes
in the scene are huge.

7.20.1:C6
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C7
Fixed critical vulnerability ACV-116267.

7.20.1:C8
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

AXIS P1244, version 6.50.1.3

AXIS M7011, version 6.50.1.3

AXIS M3027, version 6.50.1.3

AXIS M3026, version 6.50.1.3

AXIS M3007, version 6.50.1.3

AXIS M3006, version 6.50.1.3

AXIS M1145-L, version 6.50.1.3

AXIS M1145, version 6.50.1.3

AXIS M1125, version 6.50.1.3

AXIS M1124, version 6.50.1.3

AXIS F44 Dual Audio Input, version 6.50.1.4

AXIS F44, version 6.50.1.4

AXIS F41, version 6.50.1.3

AXIS F34, version 6.50.1.4

AXIS Q1615Mk_II, version 7.35.1

AXIS P1365Mk_II, version 7.30.1

AXIS Q6055-E, version 7.30.1

AXIS Q6055, version 7.30.1

AXIS Q6054-E, version 7.30.1

AXIS Q6052-E, version 7.30.1