Axis Communications Firmware

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
OpenSSL version updated to 1.0.2j.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Corrected an issue that let the auto focus function stop working after
Autotracking had been enabled/disabled.

7.30.1:C9
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C10
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C11
Corrected security vulnerability CVE-2016-2147.

7.30.1:C12
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved camera stability when TriggerData is used.

7.10.1:C2
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C3
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

7.10.1:C4
Fixed security vulnerability CVE-2015-7547.

7.10.1:C5
Optimized Network Share polling frequency.

7.10.1:C6
Improved stability in actionengine (tcp notification).

7.10.1:C7
Fixed Security vulnerability CVE-2016-5195.

7.10.1:C8
Improved handling of day and night shift levels adjustment.

7.10.1:C9
Improved HTTP image upload stability in unstable networks.

7.10.1:C10
Improved camera stability when metadata is used.

7.10.1:C11
Improved loading of the web-interface in unstable networks.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F2
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F3
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F4
Support for 24bit LPCM audio mode.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F7
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Improved UI controls and more configuration possibilities for "Allow Slow
Shutter" under Settings -> Image.

7.30.1:C3
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C4
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C6
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C7
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C8
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C9
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C10
Corrected security vulnerability CVE-2016-2147.

7.30.1:C11
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved handling of day and night shift levels adjustment.

7.10.1:C2
Improved HTTP image upload stability in unstable networks.

7.10.1:C3
Improved camera stability when metadata is used.

7.10.1:C4
Improved loading of the web-interface in unstable networks.

7.10.1:C5
Improved camera stability when TriggerData is used.

7.10.1:C6
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C7
Improved stability in actionengine (tcp notification).

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F5
Support for day / night shift level adjustment.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved stability in actionengine (tcp notification).

7.10.1:C2
Improved handling of day and night shift levels adjustment.

7.10.1:C3
Improved HTTP image upload stability in unstable networks.

7.10.1:C4
Improved camera stability when metadata is used.

7.10.1:C5
Correct PTZ status is shown when pressing the PTZ test button.

7.10.1:C6
Improved loading of the web-interface in unstable networks.

7.10.1:C7
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C8
Improved camera stability when TriggerData is used.

7.10.1:C9
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F5
Support for day / night shift level adjustment.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved stability in actionengine (tcp notification).

7.10.1:C2
Improved handling of day and night shift levels adjustment.

7.10.1:C3
Improved HTTP image upload stability in unstable networks.

7.10.1:C4
Improved camera stability when metadata is used.

7.10.1:C5
Correct PTZ status is shown when pressing the PTZ test button.

7.10.1:C6
Improved loading of the web-interface in unstable networks.

7.10.1:C7
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C8
Improved camera stability when TriggerData is used.

7.10.1:C9
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved handling of day and night shift levels adjustment.

7.10.1:C2
Improved HTTP image upload stability in unstable networks.

7.10.1:C3
Improved camera stability when metadata is used.

7.10.1:C4
Improved loading of the web-interface in unstable networks.

7.10.1:C5
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C6
Improved camera stability when TriggerData is used.

7.10.1:C7
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C8
Improved stability in actionengine (tcp notification).

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved handling of day and night shift levels adjustment.

7.10.1:C2
Improved HTTP image upload stability in unstable networks.

7.10.1:C3
Improved camera stability when metadata is used.

7.10.1:C4
Improved loading of the web-interface in unstable networks.

7.10.1:C5
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C6
Improved camera stability when TriggerData is used.

7.10.1:C7
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C8
Improved stability in actionengine (tcp notification).

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F2
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F3
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F4
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F7
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F8
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved handling of day and night shift levels adjustment.

7.10.1:C2
Improved HTTP image upload stability in unstable networks.

7.10.1:C3
Improved camera stability when metadata is used.

7.10.1:C4
Improved loading of the web-interface in unstable networks.

7.10.1:C5
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C6
Improved camera stability when TriggerData is used.

7.10.1:C7
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C8
Improved stability in actionengine (tcp notification).

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
Noise Reduction setting has been added to Settings -> Image.

7.30.1:F2
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F3
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F4
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F5
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F6
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F7
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F8
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F9
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F10
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F2
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.20.1:F3
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F4
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F5
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F6
Support for 24bit LPCM audio mode.

7.20.1:F7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F8
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F9
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
VMD upgraded to version 4.1.

7.10.1:F3
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F4
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F5
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved handling of day and night shift levels adjustment.

7.10.1:C2
Improved HTTP image upload stability in unstable networks.

7.10.1:C3
Improved camera stability when metadata is used.

7.10.1:C4
Improved loading of the web-interface in unstable networks.

7.10.1:C5
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C6
Improved camera stability when TriggerData is used.

7.10.1:C7
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C8
Improved stability in actionengine (tcp notification).

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.20.1 since 7.10.1
======================================================================

7.20.1:F1
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F2
Changed the default web server authentication from Basic & Digest to Digest
only.

7.20.1:F3
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F4
Apache web server has been updated to version 2.4.25.

7.20.1:F5
Support for 24bit LPCM audio mode.

7.20.1:F6
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F7
Products can list now all the supported auxiliary commands such as PTZ Test,
Calibration, Speed Dry for clients asking for http:///axis-
cgi/com/ptz.cgi?query=auxiliary.

7.20.1:F8
PTZ products can be controlled now via HTTP 1.1 keep-alive connections which
increases PTZ control accuracy, reduces overhead communication and therefore
lowers the risk for security focused network infrastructure to block PTZ control
commands when controlling a PTZ camera.

7.20.1:F9
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F10
The Axis Media Control (AMC) is not longer embedded in the product and needs to
be downloaded separately on https://www.axis.com/global/en/support/downloads
/axis-media-control if needed. The Java Applet has been removed as well.

7.20.1:F11
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

New features in 7.10.1 since 6.50.1
======================================================================

7.10.1:F1
Our ONVIF implementation have been improved by adding
GetVideoEncoderConfigurationOptions extension. This makes it possible for an
ONVIF client to get the bitrate range.

7.10.1:F2
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.20.1 since 7.10.1
=====================================================================

7.20.1:C1
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.20.1:C2
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

Corrections in 7.10.1 since 6.50.1
=====================================================================

7.10.1:C1
Corrected handling of #D text overlay, it's no longer needed to specify the
camera source.

7.10.1:C2
Improved handling of day and night shift levels adjustment.

7.10.1:C3
Improved HTTP image upload stability in unstable networks.

7.10.1:C4
Improved camera stability when metadata is used.

7.10.1:C5
Correct PTZ status is shown when pressing the PTZ test button.

7.10.1:C6
Improved loading of the web-interface in unstable networks.

7.10.1:C7
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

7.10.1:C8
Improved camera stability when TriggerData is used.

7.10.1:C9
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C10
Improved stability in actionengine (tcp notification).

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Release 7.25.1
==============

This is the first official release for the AXIS M5525-E

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.30.1 since 7.20.1
================================================================================

7.30.1:F1
The FTP Server is now disabled by default as it is not used during normal
operation and may pose a security risk.The FTP Server may be enabled during
advanced maintenance or troubleshooting in Settings -> System -> PlainConfig ->
Network.

7.30.1:F2
Support for Brute Force Delay Protection. The product can block a client for a
period of time if too many login attempts failed. Brute Force Delay Protection
can be configured under System -> PlainConfig -> System -> System
PreventDoSAttack.

7.30.1:F3
Support for automatic license key installation when installing an ACAP under
Settings -> Apps.

7.30.1:F4
Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras
video stream can be received via secure end-to-end encrypted transportation
method only by authorized clients.

7.30.1:F5
A parameter called "Enable the script editor (editcgi)" has been added to plain
config -> system section to enable/disable the feature. Editcgi will be removed
in future completely and function is considered deprecated.

7.30.1:F6
Support for Adaptive Resolution. Adaptive Resolution is enabled per default and
takes only effect when viewing live stream in the web-interface. The viewing
client will receive a image resolution that is adapted or close to the viewing
clients real display resolution to higher the user experience.

7.30.1:F7
Support for Zipstream Dynamic FPS - Lower Limit
Support for Zipstream Dynamic GOP - Upper Limit

It is now possible to further adjust and set limits for Dynamic FPS and Dynamic
GOP settings and can be configured under Stream settings -> Zipstream.

7.30.1:F8
Support for Flash All/Factory Default while performing a firmware update. It is
now possible to select an option that will factory default the camera after a
firmware update/downgrade has been performed under Settings -> System ->
Maintenance.

7.30.1:F9
Added a link under Settings -> Apps for the user to get fast-access to
information about available ACAPs on www.axis.com/products/analytics-and-other-
applications.

Features in 7.20.1
================================================================================
7.20.1:F1
The functionality of enabling Axis DNS Service via control button has been
disabled by default. It can be enabled again using VAPIX.

7.20.1:F2
Changed the default web server authentication from Basic and Digest to Digest
only.

7.20.1:F3
Upon a factory default, the camera will generate a self-signed certificate at
boot and enable HTTPS. This allows clients to use encrypted access from start.
If HTTPS is to be used in daily operations, it is recommended to replace the
generated self-signed certificate with a CA-signed certificate.

7.20.1:F4
Support for 24bit LPCM audio mode.

7.20.1:F5
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

7.20.1:F6
Support for AXIS SD card health API. The SD card health API allows a client to
track and request the health and wear-out state of an camera with AXIS
Surveillance SD Card.

7.20.1:F7
Pressing "Download the server report" in System -> Maintenance will now
automatically attach a snapshot of the image to the .zip file in order to
simplify support.

7.10.1:F1
It is now possible to specify image rotation via ONVIF video source
configuration

7.10.1:F2
Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled
application.

7.10.1:F3
VMD upgraded to version 4.1.

7.10.1:F4
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

7.10.1:F5
New web-interface with improved usability and broader support of web-clients and
operating systems. For more information please see
https://www.axis.com/global/en/support/technical-notes/browser-support.

7.10.1:F6
The new web-interface supports 12 different pre-installed languages which will
be chosen automatically based on browser settings. Uploading individual language
files is not needed anymore.

Supported Languages:
English - German - French - Spanish - Italian - Portugese - Polish - Russian -
Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean

Corrections in 7.30.1 since 7.20.1
================================================================================

7.30.1:C1
It is now possible to fast forward/rewind to any time in a selected recording
using the web interface.

7.30.1:C2
Reduced the waiting time for receiving a video stream significantly when a 2nd
client requests a video stream via multicast.

7.30.1:C3
The area zoom functionality has been removed from the web-interface. Area zoom
was used to draw a rectangle in the live view to let the camera either
mechanical or digital PTZ to its desired position.

7.30.1:C4
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.

7.30.1:C5
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.

7.30.1:C6
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

7.30.1:C7
Fixed a issue that let the recorded video to the computer using the Video
Capture button be incorrectly displayed or unusable in some rare occasions.

7.30.1:C8
Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using
absolute PAN command. Please use the latest version of the ACAP.

7.30.1:C9
Corrected security vulnerability CVE-2016-2147.

7.30.1:C10
Corrected critical vulnerability ACV-120444.

Corrections in 7.20.1
================================================================================

7.20.1:C1
Corrected an issue that prevented the user from saving a action rule with a
Email Recipient that had SSL enabled.

7.20.1:C2
Apache web server has been updated to version 2.4.25.

7.20.1:C3
Corrected a issue resulting in "503 Service Unavailable" when trying to play a
recording from a camera with a specific time range via ONVIF.

7.20.1:C4
Corrected an issue with an additional sign "/" in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.

7.20.1:C5
Fixed an issue when an ONVIF client connected to the camera via digest
authentication.

7.20.1:C6
Fixed critical vulnerability ACV-116267.

7.20.1:C7
Improved camera stability when recording via ONVIF profile G.

7.10.1:C1
Improved handling of day and night shift levels adjustment.

7.10.1:C2
Improved HTTP image upload stability in unstable networks.

7.10.1:C3
Improved camera stability when metadata is used.

7.10.1:C4
Improved loading of the web-interface in unstable networks.

7.10.1:C5
Improved camera stability when TriggerData is used.

7.10.1:C6
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

7.10.1:C7
Improved stability in actionengine (tcp notification).

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 5.75.1.7 since 5.75.1.6
======================================

5.75.1.7:C01
Updated Apache web server to 2.4.27 to improve overall minimum cyber security
standards.

5.75.1.7:C02
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

5.75.1.7:C03
Corrected critical vulnerability ACV-120444.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 7.30.1.1 since 7.30.1
====================================

7.30.1.1:C01
Added support for new type of NAND flash memory. Not possible to downgrade to
older firmware on cameras using new memory type, see FAQ 116355 for more
information.

7.30.1.1:C02
Updated image tuning for M2026 Mk II and M2026 Mk II

7.30.1.1:C03
Correction for sporadic frame drops in h265 streams when combined with h264 streams

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in R1.65.032
================================================================================

R1.65.032:F1
AXIS Audio Player supports fallback to pre-installed playlist if HTTP stream
disconnects.

R1.65.032:F2
Possiblity to configure SIP account if it shall answer automatically incomming
calls or not. Possiblity to configure actions to act on incomming calls and to
respond, both via actions and via API.

R1.65.032:F3
Possibility to make SIP call from action rules.

R1.65.032:F4
AXIS Audio Player supports HTTP authentication when connecting to audio streams.

Corrections in R1.65.032
================================================================================

R1.65.032:C1
Setting audio mode setting under "Device Settings" (parameter DuplexMode) will
turn off audio to speaker on microphone only and turn off line in if speaker
only.

R1.65.032:C2
Fixed critical vulnerabilities

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in R1.65.032
================================================================================

R1.65.032:F1
Possiblity to configure SIP account if it shall answer automatically incomming
calls or not. Possiblity to configure actions to act on incomming calls and to
respond, both via actions and via API.

R1.65.032:F2
Possibility to make SIP call from action rules.

R1.65.032:F3
Audio Detection and Above alarm level events added.

Corrections in R1.65.032
================================================================================

R1.65.032:C1
Setting audio mode setting under "Device Settings" (parameter DuplexMode) will
turn off audio to speaker on microphone only and turn off line in if speaker
only.

R1.65.032:C2
Fixed critical vulnerabilities

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in R1.65.032
================================================================================

R1.65.032:F1
AXIS Audio Player supports fallback to pre-installed playlist if HTTP stream
disconnects.

R1.65.032:F2
Possiblity to configure SIP account if it shall answer automatically incomming
calls or not. Possiblity to configure actions to act on incomming calls and to
respond, both via actions and via API.

R1.65.032:F3
Possibility to make SIP call from action rules.

R1.65.032:F4
Audio Detection and Above alarm level events added.

R1.65.032:F5
AXIS Audio Player supports HTTP authentication when connecting to audio streams.

Corrections in R1.65.032
================================================================================

R1.65.032:C1
Setting audio mode setting under "Device Settings" (parameter DuplexMode) will
turn off audio to speaker on microphone only and turn off line in if speaker
only.

R1.65.032:C2
Fixed critical vulnerabilities

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 6.56.1
================================================================================

6.56.1:F1
Added new capture mode 11MP @ 15 FPS with the aspect ratio of 4:3.

6.56.1:F2
Added support for Wide Dynamic Range technology - Dynamic contrast.

Corrections in 6.56.1 since 6.55.1.1
================================================================================

6.56.1:C1
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.

6.56.1:C2
Support for backup.cgi and restore.cgi has been removed.

6.56.1:C3
Improved Cyber Security. Running http://ip /incl/bw to get to know the network
bandwidth requires login credentials.

6.56.1:C4
Updated Apache web server to 2.4.27 to improve overall minimum cyber security
standards.

6.56.1:C5
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.

6.56.1:C6
Corrected security vulnerability CVE-2016-2148.

6.56.1:C7
Corrected security vulnerability CVE-2016-2147 and CVE-2016-2148.

6.56.1:C8
Corrected critical vulnerability ACV-120444.

6.56.1:C9
Correction in the update of the list of available resolutions when changing
capture mode.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

AXIS Q6052, version 7.30.1

AXIS Q1775, version 7.30.1

AXIS P5635-E-Mk_II, version 7.30.1

AXIS P5624-E-Mk_II, version 7.30.1

AXIS P5515-E, version 7.30.1

AXIS P5515, version 7.30.1

AXIS P5514-E, version 7.30.1

AXIS P5514, version 7.30.1

AXIS P5635-E-Mk_II, version 7.20.1

AXIS M5525-E, version 7.25.1

AXIS P1364, version 7.30.1

AXIS Q3709-PVE, version 5.75.1.7

AXIS M3106-L_Mk_II, version 7.30.1.1

AXIS M2026-LE_Mk_II, version 7.30.1.1

AXIS C8033, version R1.65.032

AXIS C3003, version R1.65.032

AXIS C2005, version R1.65.032

AXIS C1004-E, version R1.65.032

AXIS Q1659, version 6.56.1

AXIS Q3517, version 7.15.3