October 26, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 7.15.2.2 since 7.15.2.1
======================================
7.15.2.2:C1
Corrected issue with dynamic FPS in H.264.
7.15.2.2:C2
Corrected issue with ONVIF media profile for Panorama view.
7.15.2.2:C3
Enabled tilt in Panorama/Corridor view for Wall mount option.
Enabled tilt in Corner Left/Right view for Ceiling/Desk mount option.
Enabled pan/tilt in Quad/Corridor view for Ceiling/Desk mount option.
7.15.2.2:C4
Possible to install ACAP for wrong platform.
7.15.2.2:C5
Added support for new type of NAND flash memory.
Not possible to downgrade to older firmware on cameras using new memory type,
see FAQ 116355, "Why is it not possible to downgrade firmware on my camera?",
for more information.
7.15.2.2:C6
Corrected issue with hold current exposure mode.
7.15.2.2:C7
Corrected critical vulnerability ACV-120444.
7.15.2.2:C8
Corrected security vulnerability CVE-2016-2147 and CVE-2016-2148.
7.15.2.2:C9
Corrected security vulnerability CVE-2016-2148.
7.15.2.2:C10
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber security level.
7.15.2.2:C11
Updated Apache web server to 2.4.27 to improve overall minimum cyber security standards.
Corrections in 7.15.2.1 since 7.15.2
======================================
7.15.2.1:C1
Fixed critical vulnerability ACV-116267.
7.15.2.1:C2
Apache web server has been updated to version 2.4.25.
7.15.2.1:C3
Corrected issue in area zoom for view areas.
7.15.2.1:C4
Improved image tuning to handle scenes with high dynamic range.
7.15.2.1:C5
Corrected issue exporting an ongoing event recording the stop time does not take
DST (Daylight Savings Time) in consideration.
7.15.2.1:C6
Corrected issue where HDMI source list is not updated when changing dewarped view.
↧
October 26, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 7.15.2.2 since 7.15.2
======================================
7.15.2.2:C1
Corrected issue with dynamic FPS in H.264.
7.15.2.2:C2
Enabled tilt in Panorama/Corridor view for Wall mount option.
Enabled tilt in Corner Left/Right view for Ceiling/Desk mount option.
Enabled pan/tilt in Corridor view for Ceiling/Desk mount option.
7.15.2.2:C3
Possible to install ACAP for wrong platform.
7.15.2.2:C4
Added support for new type of NAND flash memory.
Not possible to downgrade to older firmware on cameras using new memory type,
see FAQ 116355, "Why is it not possible to downgrade firmware on my camera?",
for more information.
7.15.2.2:C5
Corrected issue with hold current exposure mode.
7.15.2.2:C6
Corrected critical vulnerability ACV-120444.
7.15.2.2:C7
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber security level.
↧
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.40.9.10 since 5.40.9.9
=======================================
5.40.9.10:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.40.9.10:C02
Corrected critical vulnerability ACV-120444.
5.40.9.10:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.40.9.9 since 5.40.9.8
======================================
5.40.9.9:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.40.9.9:C02
Corrected critical vulnerability ACV-120444.
5.40.9.9:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.50.4.9 since 5.50.4.8
======================================
5.50.4.9:C01
Corrected critical vulnerability ACV-120444.
↧
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.50.4.10 since 5.50.4.9
=======================================
5.50.4.10:C01
Corrected critical vulnerability ACV-120444.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.50.4.9 since 5.50.4.8
======================================
5.50.4.9:C01
Corrected critical vulnerability ACV-120444.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.50.4.9 since 5.50.4.8
======================================
5.50.4.9:C01
Corrected critical vulnerability ACV-120444.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.1.8 since 5.41.1.7
======================================
5.41.1.8:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.1.8:C02
Corrected critical vulnerability ACV-120444.
5.41.1.8:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.3.3 since 5.41.3.2
======================================
5.41.3.3:C01
Corrected critical vulnerability ACV-120444.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.1.6 since 5.41.1.5
======================================
5.41.1.6:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.1.6:C02
Corrected critical vulnerability ACV-120444.
5.41.1.6:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.2.5 since 5.41.2.4
======================================
5.41.2.5:C01
Corrected critical vulnerability ACV-120444.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.3.5 since 5.41.3.4
======================================
5.41.3.5:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.3.5:C02
Corrected critical vulnerability ACV-120444.
5.41.3.5:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.3.5 since 5.41.3.4
======================================
5.41.3.5:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.3.5:C02
Corrected critical vulnerability ACV-120444.
5.41.3.5:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected a bug that let the overlay text disappear when a client requests a new
video stream.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Improved recording stability towards Axis Companion Recorder.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that prevented EIS to work when the zoom limit was set to
optical only.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
↧
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧