October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
6.50.1.3:C23
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C24
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
It is now possible to enter up to a 64 characters password when establishing the
PTZ Remote Camera Connection from Q6000 -> Q60. Previously it was 16 only.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C09
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C10
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C11
Enable solo mode.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
It is now possible to enter up to a 64 characters password when establishing the
PTZ Remote Camera Connection from Q6000 -> Q60. Previously it was 16 only.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C09
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C10
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C11
Enable solo mode.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.3.4 since 5.41.3.3
======================================
5.41.3.4:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.3.4:C02
Corrected critical vulnerability ACV-120444.
5.41.3.4:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.1.6 since 5.41.1.5
======================================
5.41.1.6:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.1.6:C02
Corrected critical vulnerability ACV-120444.
5.41.1.6:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.1.7 since 5.41.1.6
======================================
5.41.1.7:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.1.7:C02
Corrected critical vulnerability ACV-120444.
5.41.1.7:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.1.5 since 5.41.1.4
======================================
5.41.1.5:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.1.5:C02
Corrected critical vulnerability ACV-120444.
5.41.1.5:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.75.1.8 since 5.75.1.7
======================================
5.75.1.8:C01
Corrected critical vulnerability ACV-120444.
↧
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.75.1.8 since 5.75.1.7
======================================
5.75.1.8:C01
Corrected critical vulnerability ACV-120444.
↧
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.70.1.4 since 5.70.1.3
======================================
5.70.1.4:C01
Corrected critical vulnerability ACV-120444.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.70.1.6 since 5.70.1.5
======================================
5.70.1.6:C01
Corrected critical vulnerability ACV-120444.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.70.1.4 since 5.70.1.3
======================================
5.70.1.4:C01
Corrected critical vulnerability ACV-120444.
↧