October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.70.1.5 since 5.70.1.4
======================================
5.70.1.5:C01
Corrected critical vulnerability ACV-120444.
↧
October 10, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.41.1.9 since 5.41.1.8
======================================
5.41.1.9:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.41.1.9:C02
Corrected critical vulnerability ACV-120444.
5.41.1.9:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected help files to show only supported overlay modifiers for mechanical PTZ
cameras.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
↧
November 1, 2017, 4:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.55.5.1 since 6.55.5
====================================
6.55.5.1:C01
Corrected critical vulnerability ACV-120444.
↧
↧
November 1, 2017, 4:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.55.5.1 since 6.55.5
====================================
6.55.5.1:C01
Corrected critical vulnerability ACV-120444.
↧
November 1, 2017, 4:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.55.5.1 since 6.55.5
====================================
6.55.5.1:C01
Corrected critical vulnerability ACV-120444.
↧
November 1, 2017, 4:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.55.5.1 since 6.55.5
====================================
6.55.5.1:C01
Corrected critical vulnerability ACV-120444.
↧
October 16, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 6.50.1 since 5.75.1.5
=====================================
6.50.1:F1
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.
6.50.1:F2
Added support for ONVIF standardised I/O events.
6.50.1:F3
Added 270 degrees versions for Panorama and Double Panorama modes.
6.50.1:F4
Corrected behavior for conditional triggers.
6.50.1:F5
Improved handling for networks with small MTU values.
6.50.1:F6
Support for ONVIF Profile G.
Corrections in 6.50.1 since 5.75.1.5
====================================
6.50.1:C1
Improvements in session ID handling for rtsp streaming. Useful when streaming in
some video clients.
6.50.1:C2
Fixed critical vulnerability ACV-116267.
6.50.1:C3
Time zone information sent in e-mail headers.
6.50.1:C4
When DST is enabled, export recordings can now be done via web interface.
6.50.1:C5
Users with admin permissions can edit ACAP configuration settings.
6.50.1:C6
Fixed issues with privacy masks showing up as a small box (1 pixel) in the top-
left corner after restart.
6.50.1:C7
Added ACAP support for NV12 format.
6.50.1:C8
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.
6.50.1:C9
Fixed issues with stopped events for manually triggered recording.
6.50.1:C10
Date format now displayed correctly in ACM.
6.50.1:C11
Optimized Network Share polling frequency.
6.50.1:C12
Improved stability in actionengine (tcp notification).
↧
↧
November 6, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New Features
============
N/A
Corrections
===========
1.11.1.3:C1
Corrected security vulnerabilities CVE-2017-13077 to CVE-2017-13088
1.11.1.3:C2
Improved the time it takes to remove a network share full of data.
A network share is now removed within a few seconds regardless
of the amount of data stored on it.
1.11.1.3:C3
Remove SMB port 139
1.11.1.2:C1
Corrected critical vulnerability ACV-120444
1.11.1.2:C2
Corrected security vulnerability CVE-2016-2147
1.11.1.2:C3
Corrected security vulnerability CVE-2016-2148
1.11.1.2:C4
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
1.11.1.2:C5
Fixed an issue where email configuration was not possible.
1.11.1.2:C6
Updated SMB configuration to disallow anonymous connections and service
broadcast.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.50.3.9 since 5.50.3.8
======================================
5.50.3.9:C01
Corrected critical vulnerability ACV-120444.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.40.9.12 since 5.40.9.11
========================================
5.40.9.12:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.40.9.12:C02
Corrected critical vulnerability ACV-120444.
5.40.9.12:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.40.9.12 since 5.40.9.11
========================================
5.40.9.12:C01
Fixed issue with XML answer to multiple parameter groups definition requests.
5.40.9.12:C02
Corrected critical vulnerability ACV-120444.
5.40.9.12:C03
Fixed bug regarding obsolete SSL sessions in stclient.
↧
↧
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.50.5.3 since 5.50.5.2
======================================
5.50.5.3:C01
Corrected critical vulnerability ACV-120444.
↧
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.50.5.3 since 5.50.5.2
======================================
5.50.5.3:C01
Corrected critical vulnerability ACV-120444.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C23
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.3:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.3:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.3:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.3:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.3:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.3:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.3:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.3:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.3:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.3:C12
Improved connection handling with Honeywell applications.
6.50.1.3:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.3:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.3:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.3:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.3:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.3:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.3:C19
Corrected critical vulnerability ACV-120444.
6.50.1.3:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.3:C21
Corrected security vulnerability CVE-2016-2148.
6.50.1.3:C22
Corrected an issue that let the camera to become unresponsive in rare occasions
when using privacy masks.
6.50.1.3:C23
Corrected an issue that disabled IEEE 802.1x network configuration after
updating from firmware 5.40 to 6.50.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.2:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Support for recordings with G711 µ-law audio encoding.
6.50.1.1:C09
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C10
PTZ presetposall returns correct preset name.
6.50.1.1:C11
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C12
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
6.50.1.1:C13
Added support to adjust the temporal noise filter.
↧
↧
October 11, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 6.50.2 since 6.50.1
====================================
Corrections in 6.50.1.4 since 6.50.1.3
======================================
6.50.1.4:C01
Corrected a bug that resulted in 503 Service Unavailable when trying to play a
recording from a camera with a specific time range via ONVIF.
6.50.1.4:C02
Corrected a bug that added an additional / in the absolute upload path of an
SFTP Recipient when saving the action rule causing it to not work correctly.
6.50.1.4:C03
Corrected a bug that prevented the user from seeing the ACAP running status and
re-added the Main Page link to open a ACAP in the web-interface under Setup ->
Applications.
6.50.1.4:C04
Corrected a bug that let the camera send corrupted XML data packages within a
stream which caused a VMS to not record video motion detection coming
from the camera.
6.50.1.4:C05
The license expiration date of an installed ACAP is now shown correctly again
when running http://ip-address/axis-cgi/applications/list.cgi.
6.50.1.4:C06
The correct IPv6 router IP-addresses are now shown correctly in the network
interface of the web-interface and in ONVIF responses.
6.50.1.4:C07
Adjusted the system log messages for the NTP daemon to be more specific and
highlight that there is a time drift instead of an "adjustment".
6.50.1.4:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time
zone in the e-mail header.
6.50.1.4:C09
Corrected an issue that delivered E-Mails send from the camera with a wrong time
stamp in the e-mail header.
6.50.1.4:C10
Corrected an issue with FTP recipients configured with a DNS name instead of a
static IP-address which caused the FTP recipient test or action rule to fail.
6.50.1.4:C11
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.
6.50.1.4:C12
Improved connection handling with Honeywell applications.
6.50.1.4:C13
Updated Apache web server to version 2.4.27 to improve overall minimum cyber
security standards.
6.50.1.4:C14
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to
increase overall cyber security level.
6.50.1.4:C15
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber
security level.
6.50.1.4:C16
Improved certificate handling. Certificates were previously not usable anymore
when updating straight from FW 5.40 to 6.50.
6.50.1.4:C17
Corrected an issue that changed the IDs of certificates to numbers instead of
keeping the original name.
6.50.1.4:C18
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security
level.
6.50.1.4:C19
Corrected critical vulnerability ACV-120444.
6.50.1.4:C20
Corrected security vulnerability CVE-2016-2147.
6.50.1.4:C21
Corrected security vulnerability CVE-2016-2148.
Corrections in 6.50.1.3 since 6.50.1.2
======================================
6.50.1.3:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.
6.50.1.3:C02
Fixed critical vulnerability ACV-116267.
Corrections in 6.50.1.2 since 6.50.1.1
======================================
6.50.1.2:C01
Improved handling of ONVIF requests when the client request was split into
several packages with additional network transmission delay between the
packages. Previously, the ONVIF communication failed.
Corrections in 6.50.1.1 since 6.50.1
====================================
6.50.1.1:C01
Improved stability for TCP notifications.
6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.
6.50.1.1:C03
Improved camera stability when metadata is used.
6.50.1.1:C04
Optimized privacy mask positioning.
6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.
6.50.1.1:C06
Improved camera stability when TriggerData is used.
6.50.1.1:C07
Improved loading of the web interface in unstable networks.
6.50.1.1:C08
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.
6.50.1.1:C09
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.
6.50.1.1:C10
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.50.4.8 since 5.50.4.7
======================================
5.50.4.8:C01
Corrected an issue that made the encoder become unresponsive in rare occasions.
5.50.4.8:C02
Corrected critical vulnerability ACV-120444.
↧
September 28, 2017, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Corrections in 5.51.2.9 since 5.51.2.8
======================================
5.51.2.9:C01
Corrected an issue that made the encoder become unresponsive in rare occasions.
5.51.2.9:C02
Corrected critical vulnerability ACV-120444.
↧