Axis Communications Firmware

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.65.032
================================================================================

1.65.032:F1
AXIS Audio Player supports fallback to pre-installed playlist if HTTP stream
disconnects.

1.65.032:F2
Possiblity to configure SIP account if it shall answer automatically incomming
calls or not. Possiblity to configure actions to act on incomming calls and to
respond, both via actions and via API.

1.65.032:F3
Possibility to make SIP call from action rules.

1.65.032:F4
AXIS Audio Player supports HTTP authentication when connecting to audio streams.

Corrections in 1.65.032
================================================================================

1.65.032:C1
Setting audio mode setting under "Device Settings" (parameter DuplexMode) will
turn off audio to speaker on microphone only and turn off line in if speaker
only.

1.65.032:C2
Fixed critical vulnerabilities
Corrected critical vulnerability ACV-120444
Corrected security vulnerability CVE-2016-2147 & CVE-2016-2148
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.65.032
================================================================================

1.65.032:F1
Possiblity to configure SIP account if it shall answer automatically incomming
calls or not. Possiblity to configure actions to act on incomming calls and to
respond, both via actions and via API.

1.65.032:F2
Possibility to make SIP call from action rules.

1.65.032:F3
Audio Detection and Above alarm level events added.

Corrections in 1.65.032
================================================================================

1.65.032:C1
Setting audio mode setting under "Device Settings" (parameter DuplexMode) will
turn off audio to speaker on microphone only and turn off line in if speaker
only.

1.65.032:C2
Fixed critical vulnerabilities
Corrected critical vulnerability ACV-120444
Corrected security vulnerability CVE-2016-2147 & CVE-2016-2148
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.65.032
================================================================================

1.65.032:F1
AXIS Audio Player supports fallback to pre-installed playlist if HTTP stream
disconnects.

1.65.032:F2
Possiblity to configure SIP account if it shall answer automatically incomming
calls or not. Possiblity to configure actions to act on incomming calls and to
respond, both via actions and via API.

1.65.032:F3
Possibility to make SIP call from action rules.

1.65.032:F4
Audio Detection and Above alarm level events added.

1.65.032:F5
AXIS Audio Player supports HTTP authentication when connecting to audio streams.

Corrections in 1.65.032
================================================================================

1.65.032:C1
Setting audio mode setting under "Device Settings" (parameter DuplexMode) will
turn off audio to speaker on microphone only and turn off line in if speaker
only.

1.65.032:C2
Fixed critical vulnerabilities
Corrected critical vulnerability ACV-120444
Corrected security vulnerability CVE-2016-2147 & CVE-2016-2148
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security level.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.20.1
================================================================================

8.20.1:F1
The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F3
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F4
Updated Fence- and Motion-Guard to version 2.1 with support for burnt-in alarm
overlay support.

8.20.1:F5
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

Corrections in 8.20.1
================================================================================

8.20.1:C1
Corrected an issue that made it necessary for the user to refresh manually the
storage configuration page in the web-interfce to be updated e.g. when a storage
has been disconnected from the camera.

8.20.1:C2
Corrected an issue that caused the camera to stop streaming in rare occasions.

8.20.1:C3
Corrected an issue that made it necessary to login twice when connecting to the
web-interface using Microsoft Edge.

8.20.1:C4
Corrected an issue that prevented trigger data to be inserted in every I-frame
and when motion detection triggers.

8.20.1:C5
Corrected an issue when testing multiple email recipients.

8.20.1:C6
Corrected an issue where e-mail recipients could be wrongly formatted.

8.20.1:C7
Corrected an issue that prevented the user from taking image snapshots in H264
when using the Safari web browser.

8.20.1:C8
Corrected an issue that prevented the use of the whole sensor width for some
aspect ratios.

8.20.1:C9
Corrected an issue that could cause synchronization to AVHS to fail.

8.20.1:C10
Corrected critical vulnerability ACV-128401.

8.20.1:C11
Corrected an issue that caused the image to be cut off in full screen mode in
the live view when rotated 90 or 270 degrees.

8.20.1:C12
Corrected an issue with the AXIS event handler registration for ADP partners.

8.20.1:C13
Corrected an issue that caused the camera to become unreachable via link local
address in the network when connecting client was in another subnet.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.20.1
================================================================================

8.20.1:F1
The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Added support for polygon privacy masks.

8.20.1:F3
Changed the default audio bitrate to 32 kbps.

8.20.1:F4
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F5
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F6
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F7
Updated Fence- and Motion-Guard to version 2.1 with support for burnt-in alarm
overlay support.

8.20.1:F8
Updated Loitering Guard to version 2.1 with support for burnt-in alarm overlay
support.

8.20.1:F9
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

Corrections in 8.20.1
================================================================================

8.20.1:C1
Corrected an issue that made it necessary for the user to refresh manually the
storage configuration page in the web-interfce to be updated e.g. when a storage
has been disconnected from the camera.

8.20.1:C2
Corrected an issue that caused the camera to stop streaming in rare occasions.

8.20.1:C3
Corrected an issue that made it necessary to login twice when connecting to the
web-interface using Microsoft Edge.

8.20.1:C4
Corrected an issue that prevented trigger data to be inserted in every I-frame
and when motion detection triggers.

8.20.1:C5
Corrected an issue when testing multiple email recipients.

8.20.1:C6
Corrected an issue where e-mail recipients could be wrongly formatted.

8.20.1:C7
Corrected an issue that prevented the user from taking image snapshots in H264
when using the Safari web browser.

8.20.1:C8
Corrected an issue that prevented the use of the whole sensor width for some
aspect ratios.

8.20.1:C9
Corrected an issue that could cause synchronization to AVHS to fail.

8.20.1:C10
Corrected critical vulnerability ACV-128401.

8.20.1:C11
Corrected an issue that caused the image to be cut off in full screen mode in
the live view when rotated 90 or 270 degrees.

8.20.1:C12
Corrected an issue with the AXIS event handler registration for ADP partners.

8.20.1:C13
Corrected an issue that caused the camera to become unreachable via link local
address in the network when connecting client was in another subnet.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.20.1
================================================================================

8.20.1:F1
The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Changed the default audio bitrate to 32 kbps.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Updated Fence- and Motion-Guard to version 2.1 with support for burnt-in alarm
overlay support.

8.20.1:F7
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

Corrections in 8.20.1
================================================================================

8.20.1:C1
Corrected an issue that made it necessary for the user to refresh manually the
storage configuration page in the web-interfce to be updated e.g. when a storage
has been disconnected from the camera.

8.20.1:C2
Corrected an issue that caused the camera to stop streaming in rare occasions.

8.20.1:C3
Corrected an issue that made it necessary to login twice when connecting to the
web-interface using Microsoft Edge.

8.20.1:C4
Corrected an issue that prevented trigger data to be inserted in every I-frame
and when motion detection triggers.

8.20.1:C5
Corrected an issue when testing multiple email recipients.

8.20.1:C6
Corrected an issue where e-mail recipients could be wrongly formatted.

8.20.1:C7
Corrected an issue that prevented the user from taking image snapshots in H264
when using the Safari web browser.

8.20.1:C8
Corrected an issue that prevented the use of the whole sensor width for some
aspect ratios.

8.20.1:C9
Corrected an issue that could cause synchronization to AVHS to fail.

8.20.1:C10
Corrected critical vulnerability ACV-128401.

8.20.1:C11
Corrected an issue that caused the image to be cut off in full screen mode in
the live view when rotated 90 or 270 degrees.

8.20.1:C12
Corrected an issue with the AXIS event handler registration for ADP partners.

8.20.1:C13
Corrected an issue that caused the camera to become unreachable via link local
address in the network when connecting client was in another subnet.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.20.1
================================================================================

8.20.1:F1
The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Changed the default audio bitrate to 32 kbps.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Updated Fence- and Motion-Guard to version 2.1 with support for burnt-in alarm
overlay support.

8.20.1:F7
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

Corrections in 8.20.1
================================================================================

8.20.1:C1
Corrected an issue that made it necessary for the user to refresh manually the
storage configuration page in the web-interfce to be updated e.g. when a storage
has been disconnected from the camera.

8.20.1:C2
Corrected an issue that caused the camera to stop streaming in rare occasions.

8.20.1:C3
Corrected an issue that made it necessary to login twice when connecting to the
web-interface using Microsoft Edge.

8.20.1:C4
Corrected an issue that prevented trigger data to be inserted in every I-frame
and when motion detection triggers.

8.20.1:C5
Corrected an issue when testing multiple email recipients.

8.20.1:C6
Corrected an issue where e-mail recipients could be wrongly formatted.

8.20.1:C7
Corrected an issue that prevented the user from taking image snapshots in H264
when using the Safari web browser.

8.20.1:C8
Corrected an issue that could cause synchronization to AVHS to fail.

8.20.1:C9
Corrected critical vulnerability ACV-128401.

8.20.1:C10
Corrected an issue with the AXIS event handler registration for ADP partners.

8.20.1:C11
Corrected an issue that caused the camera to become unreachable via link local
address in the network when connecting client was in another subnet.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.20.1
================================================================================

8.20.1:F1
The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Added support for polygon privacy masks.

8.20.1:F3
Changed the default audio bitrate to 32 kbps.

8.20.1:F4
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F5
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F6
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F7
Updated Fence- and Motion-Guard to version 2.1 with support for burnt-in alarm
overlay support.

8.20.1:F8
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

Corrections in 8.20.1
================================================================================

8.20.1:C1
Corrected an issue that made it necessary for the user to refresh manually the
storage configuration page in the web-interfce to be updated e.g. when a storage
has been disconnected from the camera.

8.20.1:C2
Corrected an issue that caused the camera to stop streaming in rare occasions.

8.20.1:C3
Corrected an issue that made it necessary to login twice when connecting to the
web-interface using Microsoft Edge.

8.20.1:C4
Corrected an issue that prevented trigger data to be inserted in every I-frame
and when motion detection triggers.

8.20.1:C5
Corrected an issue when testing multiple email recipients.

8.20.1:C6
Corrected an issue where e-mail recipients could be wrongly formatted.

8.20.1:C7
Corrected an issue that prevented the user from taking image snapshots in H264
when using the Safari web browser.

8.20.1:C8
Corrected an issue that prevented the use of the whole sensor width for some
aspect ratios.

8.20.1:C9
Corrected an issue that could cause synchronization to AVHS to fail.

8.20.1:C10
Corrected critical vulnerability ACV-128401.

8.20.1:C11
Corrected an issue with the AXIS event handler registration for ADP partners.

8.20.1:C12
Corrected an issue that caused the camera to become unreachable via link local
address in the network when connecting client was in another subnet.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.20.1
================================================================================

8.20.1:F1
The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Changed the default audio bitrate to 32 kbps.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Changed the default input audio gain from 30 dB to 45 dB.

8.20.1:F5
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F6
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

Corrections in 8.20.1
================================================================================

8.20.1:C1
Corrected an issue that made it necessary for the user to refresh manually the
storage configuration page in the web-interfce to be updated e.g. when a storage
has been disconnected from the camera.

8.20.1:C2
Corrected an issue that caused the camera to stop streaming in rare occasions.

8.20.1:C3
Corrected an issue that made it necessary to login twice when connecting to the
web-interface using Microsoft Edge.

8.20.1:C4
Corrected an issue that prevented trigger data to be inserted in every I-frame
and when motion detection triggers.

8.20.1:C5
Corrected an issue when testing multiple email recipients.

8.20.1:C6
Corrected an issue where e-mail recipients could be wrongly formatted.

8.20.1:C7
Corrected an issue that prevented the user from taking image snapshots in H264
when using the Safari web browser.

8.20.1:C8
Corrected an issue that prevented the use of the whole sensor width for some
aspect ratios.

8.20.1:C9
Corrected an issue that could cause synchronization to AVHS to fail.

8.20.1:C10
Corrected critical vulnerability ACV-128401.

8.20.1:C11
Corrected an issue that caused the image to be cut off in full screen mode in
the live view when rotated 90 or 270 degrees.

8.20.1:C12
Corrected an issue with the AXIS event handler registration for ADP partners.

8.20.1:C13
Corrected an issue that caused the camera to become unreachable via link local
address in the network when connecting client was in another subnet.

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.20.1
================================================================================

8.20.1:F1
The possibility to edit scripts in camera has been disabled per default in order
to increase minimum cyber security level.

8.20.1:F2
Added support for polygon privacy masks.

8.20.1:F3
Updated AXIS Video Motion Detection to version 4.2.1.

8.20.1:F4
Updated NTP server (openntpd) to version 6.2p3.

8.20.1:F5
Added support for showing hidden resolutions via API. The parameter
Properties.Image.ShowSuboptimalResolutions has been added which will, when
enabled, show all of the products supported resolutions.

Corrections in 8.20.1
================================================================================

8.20.1:C1
Corrected an issue that made it necessary for the user to refresh manually the
storage configuration page in the web-interfce to be updated e.g. when a storage
has been disconnected from the camera.

8.20.1:C2
Corrected an issue that caused the camera to stop streaming in rare occasions.

8.20.1:C3
Corrected an issue that made it necessary to login twice when connecting to the
web-interface using Microsoft Edge.

8.20.1:C4
Corrected an issue that prevented trigger data to be inserted in every I-frame
and when motion detection triggers.

8.20.1:C5
Corrected an issue when testing multiple email recipients.

8.20.1:C6
Corrected an issue where e-mail recipients could be wrongly formatted.

8.20.1:C7
Corrected an issue that prevented the user from taking image snapshots in H264
when using the Safari web browser.

8.20.1:C8
Corrected an issue that prevented the use of the whole sensor width for some
aspect ratios.

8.20.1:C9
Corrected an issue that could cause synchronization to AVHS to fail.

8.20.1:C10
Corrected critical vulnerability ACV-128401.

8.20.1:C11
Corrected an issue that caused the image to be cut off in full screen mode in
the live view when rotated 90 or 270 degrees.

8.20.1:C12
Corrected an issue with the AXIS event handler registration for ADP partners.

8.20.1:C13
Corrected an issue that caused the camera to become unreachable via link local
address in the network when connecting client was in another subnet.

AXIS C8033, version 1.65.032

AXIS C3003, version 1.65.032

AXIS C2005, version 1.65.032

AXIS C1004-E, version 1.65.032

AXIS Q3617, version 8.20.1

AXIS Q3615, version 8.20.1

AXIS Q3517, version 8.20.1

AXIS Q3515, version 8.20.1

AXIS Q3505_Mk_II, version 8.20.1

AXIS Q3504, version 8.20.1

AXIS Q1942-E, version 8.20.1

AXIS Q1941-E, version 8.20.1

AXIS Q1645, version 8.20.1

AXIS P3375-VE, version 8.20.1

AXIS P3375-V, version 8.20.1

AXIS P3375-LVE, version 8.20.1

AXIS P3375-LV, version 8.20.1

AXIS P3374-V, version 8.20.1

AXIS P3374-LV, version 8.20.1

AXIS P3228-LVE, version 8.20.1