AXIS Q8722-E, version 5.50.2.5

March 25, 2018, 3:00 pm

≪ Previous: AXIS Q1941-E, version 7.30.1.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 5.50.2.5 since 5.50.2.4
======================================

5.50.2.5:C01
Corrected critical vulnerability ACV-128401.

↧

AXIS Q8721-E, version 5.50.2.5

March 25, 2018, 3:00 pm

≫ Next: AXIS Q7414, version 5.51.5

≪ Previous: AXIS Q8722-E, version 5.50.2.5

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 5.50.2.5 since 5.50.2.4
======================================

5.50.2.5:C01
Corrected critical vulnerability ACV-128401.

↧

AXIS Q7414, version 5.51.5

March 25, 2018, 3:00 pm

≫ Next: AXIS Q3709-PVE, version 5.75.1.9

≪ Previous: AXIS Q8721-E, version 5.50.2.5

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 5.51.5 since 5.51.2.9
====================================

5.51.5:C01
Updated R2 GlobalSign Root Certificate to version 20170717.

5.51.5:C02
Corrected an issue that let the camera become unresponsive in rare occasions when
connected to an AVHS system.

5.51.5:C03
Corrected critical vulnerability ACV-128401.

↧

AXIS Q3709-PVE, version 5.75.1.9

March 27, 2018, 3:00 pm

≫ Next: AXIS M3015, version 7.15.5.1

≪ Previous: AXIS Q7414, version 5.51.5

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 5.75.1.9 since 5.75.1.8
======================================

5.75.1.9:C01
Corrected critical vulnerability ACV-128401.

↧

AXIS M3015, version 7.15.5.1

April 8, 2018, 3:00 pm

≫ Next: AXIS Q8632-E, version 6.50.2.3

≪ Previous: AXIS Q3709-PVE, version 5.75.1.9

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 7.15.5.1 since 7.15.5
====================================

7.15.5.1:C01
Corrected critical vulnerability ACV-128401.

↧

AXIS Q8632-E, version 6.50.2.3

April 11, 2018, 3:00 pm

≫ Next: AXIS Q8631-E, version 6.50.2.3

≪ Previous: AXIS M3015, version 7.15.5.1

↧

AXIS Q8631-E, version 6.50.2.3

April 11, 2018, 3:00 pm

≫ Next: AXIS P5544, version 5.41.2.6

≪ Previous: AXIS Q8632-E, version 6.50.2.3

↧

AXIS P5544, version 5.41.2.6

April 17, 2018, 3:00 pm

≫ Next: AXIS Q6032-E, version 5.41.4

≪ Previous: AXIS Q8631-E, version 6.50.2.3

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 5.41.2.6 since 5.41.2.5
======================================

5.41.2.6:C01
Corrected critical vulnerability ACV-128401.

↧

AXIS Q6032-E, version 5.41.4

April 10, 2018, 3:00 pm

≫ Next: AXIS Q3515, version 7.35.3

≪ Previous: AXIS P5544, version 5.41.2.6

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 5.41.4 since 5.41.1.8
====================================

5.41.4:C01
Corrected critical security vulnerability ACV-128401.

↧

AXIS Q3515, version 7.35.3

April 18, 2018, 3:00 pm

≫ Next: AXIS D2050-VE, version 7.35.4.2

≪ Previous: AXIS Q6032-E, version 5.41.4

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 7.35.3
================================================================================

7.35.3:F1
View area 1 is a "master" view area and cannot be removed before removing other
view areas.

Corrections in 7.35.3
================================================================================

7.35.3:C1
Corrected an issue that resets the barrel distortion correction settings after
updating the camera.

7.35.3:C2
Updated Apache web server to 2.4.27 to improve overall minimum cyber security
standards.

7.35.3:C3
Corrected an issue that listed "Optical Zoom for Monitoring" as pre-selected
option in the installation wizard. "Optical Zoom for Installation" is the
preferred one instead.

↧

AXIS D2050-VE, version 7.35.4.2

April 18, 2018, 3:00 pm

≫ Next: AXIS M3016, version 7.15.5.1

≪ Previous: AXIS Q3515, version 7.35.3

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 7.35.4.2
================================================================================

7.35.4.2:C1
Corrected resetting radar zones when upgrading firmware.

New features in 7.35.4.1
================================================================================

7.35.4.1:F1
Extend trail lifetime up to 24 hours

7.35.4.1:F2
Device location configuration in ACA

7.35.4.1:F3
Speed filters in RMD zones and crosslines

7.35.4.1:F4
Crossline detection

7.35.4.1:F5
Visualize object classification in radar video stream

7.35.4.1:F6
Enable stream burn-in of RMD zones and crosslines

7.35.4.1:F7
Increased object tracker stability and performance

Corrections in 7.35.4.1
================================================================================

7.35.4.1:C1
Corrected critical vulnerability ACV-120444.

7.35.4.1:C2
Corrected security vulnerability CVE-2017-9798.

7.35.4.1:C3
Corrected critical vulnerability ACV-128401.

↧

AXIS M3016, version 7.15.5.1

April 17, 2018, 3:00 pm

≫ Next: AXIS M3046-V_1.8MM, version 8.15.1

≪ Previous: AXIS D2050-VE, version 7.35.4.2

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 7.15.5.1 since 7.15.5
====================================

7.15.5.1:C01
Corrected critical vulnerability ACV-128401.

↧

AXIS M3046-V_1.8MM, version 8.15.1

April 19, 2018, 3:00 pm

≫ Next: AXIS M3046-V, version 8.15.1

≪ Previous: AXIS M3016, version 7.15.5.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 8.15.1
================================================================================

8.15.1:F1
Support for two way Audio and I/O via AXIS T6101 and AXIS T6112.

↧

AXIS M3046-V, version 8.15.1

April 19, 2018, 3:00 pm

≫ Next: AXIS M3045-V, version 8.15.1

≪ Previous: AXIS M3046-V_1.8MM, version 8.15.1

↧

AXIS M3045-V, version 8.15.1

April 19, 2018, 3:00 pm

≫ Next: AXIS M3044-V, version 8.15.1

≪ Previous: AXIS M3046-V, version 8.15.1

↧

AXIS M3044-V, version 8.15.1

April 19, 2018, 3:00 pm

≫ Next: AXIS M3046-V_1_8MM, version 8.15.1

≪ Previous: AXIS M3045-V, version 8.15.1

↧

AXIS M3046-V_1_8MM, version 8.15.1

April 19, 2018, 3:00 pm

≫ Next: AXIS P3904-R_Mk_II, version 6.50.2.3

≪ Previous: AXIS M3044-V, version 8.15.1

↧

AXIS P3904-R_Mk_II, version 6.50.2.3

April 10, 2018, 3:00 pm

≫ Next: AXIS A8105-E, version 1.65.2

≪ Previous: AXIS M3046-V_1_8MM, version 8.15.1

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

This is a minor LTS release.
These release notes are generic and contain all corrections done for all 6.50 LTS products.

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.

Corrections in 6.50.2.3 since 6.50.1.2
======================================

6.50.2.3:C01
General minor improvements to the 6.50 LTS platform.

6.50.2.3:C02
The license expiration date of an installed ACAP is now shown correctly again when running
http://ip-address/axis-cgi/applications/list.cgi.

6.50.2.3:C03
The correct IPv6 router IP-addresses are now shown correctly in the network interface of
the web-interface and in ONVIF responses.

6.50.2.3:C04
Adjusted the system log messages for the NTP daemon to be more specific and highlight that
there is a time drift instead of an "adjustment".

6.50.2.3:C05
Corrected an issue that resets the barrel distortion correction settings after updating
the camera.

6.50.2.3:C06
Support for day and night level shift.

6.50.2.3:C07
Corrected an issue that delivered E-Mails send from the camera with a wrong time zone in
the e-mail header.

6.50.2.3:C08
Corrected an issue that delivered E-Mails send from the camera with a wrong time stamp in
the e-mail header.

6.50.2.3:C09
Corrected an issue with FTP recipients configured with a DNS name instead of a static IP-
address which caused the FTP recipient test or action rule to fail.

6.50.2.3:C10
Upgrade SSL negotiation in the AVHS client to SSLv23 instead of the deprecated TLSv1.

6.50.2.3:C11
Improved connection handling with Honeywell applications.

6.50.2.3:C12
The triple DES cipher is not selected as DEFAULT in the HTTPS settings to increase overall
cyber security level.

6.50.2.3:C13
OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber security
level.

6.50.2.3:C14
Improved certificate handling. Certificates were previously not usable anymore when
updating straight from FW 5.40 to 6.50.

6.50.2.3:C15
Corrected an issue that changed the IDs of certificates to numbers instead of keeping the
original name.

6.50.2.3:C16
Corrected zoom compensation issue and improved zoom accuracy.

6.50.2.3:C17
Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security level.

6.50.2.3:C18
Corrected an issue that prevented EIS to work when the zoom limit was set to optical only.

6.50.2.3:C19
Corrected zoom compensation issue and improved zoom accuracy.

6.50.2.3:C20
Corrected critical vulnerability ACV-120444.

6.50.2.3:C21
Corrected security vulnerability CVE-2016-2147.

6.50.2.3:C22
Corrected security vulnerability CVE-2016-2148.

6.50.2.3:C23
Corrected an issue that caused the camera to become unresponsive on rare occasions when
using privacy masks.

6.50.2.3:C24
Corrected an issue that caused the camera to turn the image upside down on rare occations.

6.50.2.3:C25
SSH has been updated to 7.5 to increase overall cybersecurity standards.

6.50.2.3:C26
Corrected an issue with AXIS-CGI link decoding. Previously a CGI update to trigger an I/O
port could fail because of malformed link decoding.

6.50.2.3:C27
Reduced the waiting time for receiving a video stream significantly when a 2nd client
requests a video stream via multicast.

6.50.2.3:C28
Corrected an issue with Static IP configuration changed to DHCP after downgrading.

6.50.2.3:C29
Corrected an issue that made it impossible to play recordings from the camera in Genetec
via ONVIF Profile G.

6.50.2.3:C30
Support for HTTP keep-alive connections via ONVIF. lowers the risk for security focused
network infrastructure or unstable networks to block or drop PTZ control commands.

6.50.2.3:C31
Improved camera upgrade stability when configuration files become corrupt on rare
occasions.

6.50.2.3:C32
Improved user notification when creating a E-mail recipient that contains wrong domain
information.

6.50.2.3:C33
Corrected an issue that removed an unnecessary warning which was printed in the system log
when a user creates an action rule sending HTTP notification with custom parameter.

6.50.2.3:C34
Product has passed IPv6 compliance.

6.50.2.3:C35
Corrected an issue that displayed system-only users as well under System Options ->
Support -> System Overview.

6.50.2.3:C36
Improved stability when sending VAPIX commands through actionengined.

6.50.2.3:C37
Corrected an issue that caused a wrong time on the camera when Turkey timezone was
configured and Daylight Saving Time was enabled.

6.50.2.3:C38
Corrected an issue that caused guard tours to stop running on rare occasions.

6.50.2.3:C39
- Affects PTZ products only -
Corrected an issue that could cause a crash in PTZ ACAPs on
rare occasions.

6.50.2.3:C40
- Affects PTZ products only -
Corrected an issue that caused ACAPs that utilize the PTZ
API to stop working on rare occasions.

6.50.2.3:C41
Improved camera stability when using liblicensekey.

6.50.2.3:C42
The Apache webserver has been updated to version 2.4.29 to increase overall minimum
cybersecurity standards.

6.50.2.3:C43
Corrected an issue that prevented the user from login via SSH to the camera after updating
to 6.50.2.

6.50.2.3:C44
Updated R2 GlobalSign Root Certificate to version 20170717. Required to enable Email
recipients using 'Validate server certificate'.

6.50.2.3:C45
Added support for certificates with expiration dates beyond year 2038.

6.50.2.3:C46
Corrected an issue that let a user modify capture mode without performing the required
restart during the initial set up of the camera.

6.50.2.3:C47
Corrected an issue that caused black images on rare occasions when high loads of Events
are sent to the camera.

6.50.2.3:C48
Support for zoom-tracking in Recorded Guard Tour. Previously only pan/tilt movements were
recorded.

6.50.2.3:C49
Corrected an issue that caused problems when testing multiple Email recipients.

6.50.2.3:C50
Corrected an issue in the trigger data that set Video loss to "Disconnected" as default
initial state even when the camera is initially connected.

6.50.2.3:C51
Corrected an issue that could cause e-mail recipients to not be formatted correctly.

6.50.2.3:C52
Added new resolution sets.

6.50.2.3:C53
Corrected an issue that could cause synchronization to AVHS to fail.

6.50.2.3:C54
Corrected an issue that caused the camera to become unresponsive on rare occasions when
connected to an AVHS system.

6.50.2.3:C55
Updated AXIS Video Motion Detection to version 4.2.

6.50.2.3:C56
Updated AXIS Media Control (AMC) version to 7.3.10.1.

6.50.2.3:C57
Corrected critical vulnerability ACV-128401.

6.50.2.3:C58
Corrected an issue that prevented the user to add the camera to Genetec when HTTPS was
used.

6.50.2.3:C59
Adds PID/program name to network connection list in the Server Report.

6.50.2.3:C60
Corrected an issue that let the AXIS Camera Station failover recording not start instantly
on rare occasions.

6.50.2.3:C61
Corrected an issue that caused the camera to stop streaming on rare occasions.

↧

AXIS A8105-E, version 1.65.2

April 22, 2018, 3:00 pm

≫ Next: AXIS A8004-VE, version 1.65.2

≪ Previous: AXIS P3904-R_Mk_II, version 6.50.2.3

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.65.2
======================

1.65.2:F1
Added TerminateCall function in Action Rules

1.65.2:F2
Added support for Polycom phones

1.65.2:F3
Added Emergency Recovery for apache webserver. The product is restarting
automatically when the web-interface is not reachable within 3-4 minutes.

Corrections in 1.65.2 since 1.65.1.1
=================================

1.65.2:C01
Corrected critical vulnerability ACV-128401.

1.65.2:C02
Corrected a issue that let the camera become unresponsive in rare occasions when
connected to an AVHS system.

1.65.2:C03
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.

↧

AXIS A8004-VE, version 1.65.2

April 22, 2018, 3:00 pm

≫ Next: AXIS C8033, version 1.65.032

≪ Previous: AXIS A8105-E, version 1.65.2

This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 1.65.2
======================

1.65.2:F1
Stability improvement

1.65.2:F2
Added TerminateCall function in Action Rules

1.65.2:F3
Added support for Polycom phones

1.65.2:F4
Added Emergency Recovery for apache webserver. The product is restarting
automatically when the web-interface is not reachable within 3-4 minutes.

Corrections in 1.65.2 since 1.65.1.1
=================================

1.65.2:C01
Corrected critical vulnerability ACV-128401.

1.65.2:C02
Corrected a issue that let the camera become unresponsive in rare occasions when
connected to an AVHS system.

1.65.2:C03
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.

↧