September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.
9.40.1:F2
Added support for search functionality in help files.
9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.
9.40.1:F2
Added support for search functionality in help files.
9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.
9.40.1:F2
Added support for search functionality in help files.
9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for corridor format i.e rotation of 90 and 270 degrees.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
The VAPIX parameter AudioSource.A0.InputType has now "internal" as default value
instead of "mic".
9.40.1:C2
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C3
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for corridor format i.e rotation of 90 and 270 degrees.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
The VAPIX parameter AudioSource.A0.InputType has now "internal" as default value
instead of "mic".
9.40.1:C2
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C3
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for corridor format i.e rotation of 90 and 270 degrees.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
The VAPIX parameter AudioSource.A0.InputType has now "internal" as default value
instead of "mic".
9.40.1:C2
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C3
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧