September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Features in 9.30.1
================================================================================
9.30.1:F1
TLS1.0 and TLS1.1 is now disabled by default.
9.30.1:F2
Added support for TLSv1.3.
9.30.1:F3
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.
9.30.1:F4
Updated Video Motion Detection to version 4.3.5.
9.30.1:F5
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.
9.20.1:F1
Firmware is now signed by AXIS to increase overall minimum cybersecurity level.
More information about Signed Firmware can be found here
https://www.axis.com/support/faq/FAQ116424.
9.20.1:F2
Added support for dynamic power allocation via Link Layer Discovery Protocol
(LLDP) in addition to PoE-class based power allocation. This allows the switch
to allocate less power to the camera and potentially a greater number of PoE
devices can be connected to the switch.
LLDP can be enabled in Settings -> System -> PlainConfig -> Network -> LLDP POE
-> LLDP Send Max PoE.
9.20.1:F3
Upgraded Apache to version 2.4.38 to increase overall minimum cyber security
level.
9.20.1:F4
Updated OpenSSL to version 1.1.1a to increase overall minimum cyber security
level.
9.10.1:F1
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Features in 9.30.1
================================================================================
9.30.1:F1
TLS1.0 and TLS1.1 is now disabled by default.
9.30.1:F2
Added support for TLSv1.3.
9.30.1:F3
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.
9.30.1:F4
Updated Video Motion Detection to version 4.3.5.
9.30.1:F5
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.
9.20.1:F1
Firmware is now signed by AXIS to increase overall minimum cybersecurity level.
More information about Signed Firmware can be found here
https://www.axis.com/support/faq/FAQ116424.
9.20.1:F2
Added support for dynamic power allocation via Link Layer Discovery Protocol
(LLDP) in addition to PoE-class based power allocation. This allows the switch
to allocate less power to the camera and potentially a greater number of PoE
devices can be connected to the switch.
LLDP can be enabled in Settings -> System -> PlainConfig -> Network -> LLDP POE
-> LLDP Send Max PoE.
9.20.1:F3
Upgraded Apache to version 2.4.38 to increase overall minimum cyber security
level.
9.20.1:F4
Updated OpenSSL to version 1.1.1a to increase overall minimum cyber security
level.
9.10.1:F1
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
The VAPIX parameter AudioSource.A0.InputType has now "internal" as default value
instead of "mic".
9.40.1:C2
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C3
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F4
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F5
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F6
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F7
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
The VAPIX parameter AudioSource.A0.InputType has now "internal" as default value
instead of "mic".
9.40.1:C2
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C3
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
Features in 9.30.1
================================================================================
9.30.1:F1
TLS1.0 and TLS1.1 is now disabled by default.
9.30.1:F2
Added support for TLSv1.3.
9.30.1:F3
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.
9.30.1:F4
Updated Video Motion Detection to version 4.3.5.
9.30.1:F5
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.
9.20.1:F1
Firmware is now signed by AXIS to increase overall minimum cybersecurity level.
More information about Signed Firmware can be found here
https://www.axis.com/support/faq/FAQ116424.
9.20.1:F2
Added support for dynamic power allocation via Link Layer Discovery Protocol
(LLDP) in addition to PoE-class based power allocation. This allows the switch
to allocate less power to the camera and potentially a greater number of PoE
devices can be connected to the switch.
LLDP can be enabled in Settings -> System -> PlainConfig -> Network -> LLDP POE
-> LLDP Send Max PoE.
9.20.1:F3
Upgraded Apache to version 2.4.38 to increase overall minimum cyber security
level.
9.20.1:F4
Updated OpenSSL to version 1.1.1a to increase overall minimum cyber security
level.
9.10.1:F1
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.
↧
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
New features in 9.40.1
================================================================================
9.40.1:F1
Added support for search functionality in help files.
9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.
9.40.1:F3
Added support for average bitrate control (ABR).
9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.
9.40.1:F5
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.
9.40.1:F6
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.
9.40.1:F7
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.
9.40.1:F8
Added support for millisecond timestamps in JPEG header.
Corrections in 9.40.1
================================================================================
9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.
9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 6.50.4 since 6.50.3.1
=====================================
6.50.4:C01
General minor improvements to the 6.50 LTS platform.
6.50.4:C02
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to
10.
6.50.4:C03
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.
6.50.4:C04
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.
6.50.4:C05
Updated OpenSSL to version 1.0.2s to increase overall minimum cyber security level.
6.50.4:C06
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.
6.50.4:C07
Updated Mozilla ca-certificates to versions available at 20190122.
6.50.4:C08
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 6.50.4 since 6.50.3.1
=====================================
6.50.4:C01
General minor improvements to the 6.50 LTS platform.
6.50.4:C02
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to
10.
6.50.4:C03
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.
6.50.4:C04
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.
6.50.4:C05
Updated OpenSSL to version 1.0.2s to increase overall minimum cyber security level.
6.50.4:C06
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.
6.50.4:C07
Updated Mozilla ca-certificates to versions available at 20190122.
6.50.4:C08
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 6.50.4 since 6.50.3.1
=====================================
6.50.4:C01
General minor improvements to the 6.50 LTS platform.
6.50.4:C02
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to
10.
6.50.4:C03
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.
6.50.4:C04
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.
6.50.4:C05
Updated OpenSSL to version 1.0.2s to increase overall minimum cyber security level.
6.50.4:C06
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.
6.50.4:C07
Updated Mozilla ca-certificates to versions available at 20190122.
6.50.4:C08
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 6.50.4 since 6.50.3.1
=====================================
6.50.4:C01
General minor improvements to the 6.50 LTS platform.
6.50.4:C02
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to
10.
6.50.4:C03
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.
6.50.4:C04
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.
6.50.4:C05
Updated OpenSSL to version 1.0.2s to increase overall minimum cyber security level.
6.50.4:C06
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.
6.50.4:C07
Updated Mozilla ca-certificates to versions available at 20190122.
6.50.4:C08
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 6.50.4 since 6.50.3.1
=====================================
6.50.4:C01
General minor improvements to the 6.50 LTS platform.
6.50.4:C02
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to
10.
6.50.4:C03
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.
6.50.4:C04
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.
6.50.4:C05
Updated OpenSSL to version 1.0.2s to increase overall minimum cyber security level.
6.50.4:C06
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.
6.50.4:C07
Updated Mozilla ca-certificates to versions available at 20190122.
6.50.4:C08
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.
↧
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 6.50.4 since 6.50.3.1
=====================================
6.50.4:C01
General minor improvements to the 6.50 LTS platform.
6.50.4:C02
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to
10.
6.50.4:C03
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.
6.50.4:C04
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.
6.50.4:C05
Updated OpenSSL to version 1.0.2s to increase overall minimum cyber security level.
6.50.4:C06
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.
6.50.4:C07
Updated Mozilla ca-certificates to versions available at 20190122.
6.50.4:C08
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 6.50.4 since 6.50.3.1
=====================================
6.50.4:C01
General minor improvements to the 6.50 LTS platform.
6.50.4:C02
Corrected an issue that caused snapshot JPEG images to contain erroneous data
and
resulting in problems to display them in some viewers.
6.50.4:C03
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to
10.
6.50.4:C04
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.
6.50.4:C05
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.
6.50.4:C06
Updated OpenSSL to version 1.0.2s to increase overall minimum cyber security level.
6.50.4:C07
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.
6.50.4:C08
Updated Mozilla ca-certificates to versions available at 20190122.
6.50.4:C09
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.
↧
September 10, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 6.50.4 since 6.50.3.1
=====================================
6.50.4:C01
General minor improvements to the 6.50 LTS platform.
6.50.4:C02
Corrected an issue that caused snapshot JPEG images to contain erroneous data
and
resulting in problems to display them in some viewers.
6.50.4:C03
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to
10.
6.50.4:C04
Removed the root users default password in factory defaulted firmware. The password of the
root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow
further configuration. This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by this update
until factory defaulted.
6.50.4:C05
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.
6.50.4:C06
Updated OpenSSL to version 1.0.2s to increase overall minimum cyber security level.
6.50.4:C07
Updated libssh2 to version 1.8.2 due to that version 1.8.1 broke publickey-userauth
requests.
6.50.4:C08
Updated Mozilla ca-certificates to versions available at 20190122.
6.50.4:C09
Corrected security vulnerability in Systemd CVE-2019-6454 to increase overall minimum
cyber security level.
↧