December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
8.40.3.1:C18
Corrected an issue that caused an operator user to not be able to turn the IR cut filter
on/off.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C15
Added support for health status from Western Digital SD-cards.
8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C15
Added support for health status from Western Digital SD-cards.
8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C15
Added support for health status from Western Digital SD-cards.
8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C15
Added support for health status from Western Digital SD-cards.
8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected PTZ limit parameters "Min field angle" and "Max field angle" in Plain Config.
8.40.3.1:C04
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C05
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C06
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C07
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C08
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C09
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C10
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C11
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C12
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C13
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C14
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C15
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C16
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C17
Added support for health status from Western Digital SD-cards.
8.40.3.1:C18
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C15
Improved Auto Focus functionality.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C15
Added support for health status from Western Digital SD-cards.
8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C15
Added support for health status from Western Digital SD-cards.
8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧
December 11, 2019, 3:00 pm
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.
NOTE
====================
For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.
Corrections in 8.40.3.1 since 8.40.3
=====================================
8.40.3.1:C01
General improvements to the 2018 LTS platform.
8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.
8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.
8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).
8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.
8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.
8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.
8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.
8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.
8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.
8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.
8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.
8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.
8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.
8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.
8.40.3.1:C16
Added support for health status from Western Digital SD-cards.
8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.
↧