Quantcast
Channel: Axis Communications Firmware
Viewing all 9484 articles
Browse latest View live

AXIS P3915-R_Mk_II, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.

8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.

8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C16
Added support for health status from Western Digital SD-cards.

8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.


AXIS P3905-R_Mk_II, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.

8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C15
Added support for health status from Western Digital SD-cards.

8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.

AXIS P3904-R_Mk_II, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.

8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C15
Added support for health status from Western Digital SD-cards.

8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.

AXIS P1425-LE_Mk_II, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.

8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C15
Added support for health status from Western Digital SD-cards.

8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.

AXIS P1405-LE_Mk_II, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.

8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C15
Added support for health status from Western Digital SD-cards.

8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.

AXIS M5525-E, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.

8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that caused audio not to be included in video clips when audio encoding
G711 Mulaw was enabled.

8.40.3.1:C07
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C08
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C09
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C10
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C11
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C12
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C13
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C14
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C15
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C16
Added support for health status from Western Digital SD-cards.

8.40.3.1:C17
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.

AXIS M3048-P, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C03
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C15
Added support for health status from Western Digital SD-cards.

8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.

AXIS M3047-P, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C03
Corrected an issue that prevented the insertion of triggered data in SEI messages when
streaming H.264.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C15
Added support for health status from Western Digital SD-cards.

8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.


AXIS Companion_360_P, version 8.40.3.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.40.3.1 since 8.40.3
=====================================

8.40.3.1:C01
General improvements to the 2018 LTS platform.

8.40.3.1:C02
Corrected an issue that on rare occasions caused the image to go grey when streaming JPEG.

8.40.3.1:C03
Corrected an issue that caused playback from a SD card of recorded MKV files with audio to
fail on rare occasions.

8.40.3.1:C04
Corrected an issue with the resolution on the ONVIF command getstatus (PTZ).

8.40.3.1:C05
Corrected an issue that caused a reboot of the camera to start an ACAP even though
STARTMODE=never was set in its configuration.

8.40.3.1:C06
Corrected an issue that made it possible to add an action rule recipient without nice-name
via API.

8.40.3.1:C07
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level.

8.40.3.1:C08
Corrected an issue that caused param.cgi to show password in plain text when listing a
specified ACAP parameter.

8.40.3.1:C09
Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on
rare occasions.

8.40.3.1:C10
Corrected an issue that caused time in recording list to be incorrect for America/Caracas,
Africa/Cairo and Asia/Baku.

8.40.3.1:C11
Updated Apache to version 2.4.41 to increase overall minimum cyber security level.

8.40.3.1:C12
Corrected an issue that caused fan status not to be reported correctly via SNMP.

8.40.3.1:C13
Corrected an issue that caused parameter hidden:on_off in the Axis ACAP SDK to not work
properly.

8.40.3.1:C14
Corrected an issue that caused a log in pop-up to appear in the WebGUI after a factory
default even though no users had been configured yet.

8.40.3.1:C15
Added support for health status from Western Digital SD-cards.

8.40.3.1:C16
Corrected an issue that caused the capture_open_stream API in the Axis ACAP SDK to not
work properly.

AXIS A8207-VE, version 1.92.2

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 1.92.2 since 1.92.1
=====================================

1.92.2:C01
Wiegand timing improvements.

AXIS T8705, version 5.1.8.2

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


New features in 5.1.8.2
================================================================================

5.1.8.2:F1
Server report generation. The server report is accessible from the web GUI and
through the API /axis-cgi/serverreport.cgi.

5.1.8.2:F2
Support for legacy video sources that only support HTTP basic authentication.
Digest will remain the default option, but it will be possible to change it by
altering the parameter root.Decoder.VideoSourceAuth in /axis-cgi/param.cgi.
Possible values are digest, basic, and basic_digest.

5.1.8.2:F3
Some scenarios require a quick response time from the time the decoder is losing
the connection with a video source until it displays an error message on the
screen. The parameter root.Decoder.AutoDetectTimeout in /axis-cgi/param.cgi let
the user set a custom time if needed. Default time is 10 seconds.

5.1.8.2:F4
Added the parameter root.Network.Media in order to change the Ethernet speed.
possible values are auto, 10baseT-HD, 10baseT-FD, 100baseTX-HD, 100baseTX-FD.
Default value is auto.

5.1.8.2:F5
Implemented the appropriate API:s in order to support the security settings
from Axis Device Manager. T8705 now support certificate management,
enable/disable HTTPS and IEEE 802.1X.

5.1.8.2:F6
Support for video sources using their IPv6 address.

5.1.8.2:F7
Possibility to enable/disable the use of a link-local address.

5.1.8.2:F8
Added manual time management in the web GUI. NTP settings was previously the
only setting, but now it's possible to set time zone, daylight saving time, and
setting the time and date manually.

5.1.8.2:F9
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.


Corrections in 5.1.8.2
================================================================================

5.1.8.2:C1
Video sources in multiview changed the order they were displayed when the
decoder lost connection to the video source, and the source later
showed up with a new IP address.

AXIS P3719-PLE, version 9.45.3

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

Corrections in 9.45.3
================================================================================

9.45.3:C1
Bandwidth optimizations for H.264 and H.265.

9.45.2:C2
General imaging improvements.

9.45.2:C3
General stability improvements

AXIS Q6215-LE, version 9.60.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
The Orientation Aid PTZ ACAP is now pre-installed.

9.60.1:F5
Added possibility to copy action rules, schedules and recipients.

9.60.1:F6
Updated Video Motion Detection to version 4.4.3.

9.60.1:F7
Updated Motion guard to version 2.2.2.

9.60.1:F8
Updated Fence guard to version 2.2.2.

9.60.1:F9
Updated loitering guard to version 2.2.2.

9.60.1:F10
Added NTP synchronization status to VAPIX Time API.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275

AXIS Q6125-LE, version 9.60.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Updated Motion guard to version 2.2.2.

9.60.1:F7
Updated Fence guard to version 2.2.2.

9.60.1:F8
Updated loitering guard to version 2.2.2.

9.60.1:F9
Added NTP synchronization status to VAPIX Time API.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275

AXIS Q6075-E, version 9.60.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Updated Motion guard to version 2.2.2.

9.60.1:F7
Updated Fence guard to version 2.2.2.

9.60.1:F8
Updated loitering guard to version 2.2.2.

9.60.1:F9
Updated Orientation Aid PTZ ACAP to version 1.4.1.

9.60.1:F10
Added NTP synchronization status to VAPIX Time API.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275


AXIS Q6075, version 9.60.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Updated Motion guard to version 2.2.2.

9.60.1:F7
Updated Fence guard to version 2.2.2.

9.60.1:F8
Updated loitering guard to version 2.2.2.

9.60.1:F9
Updated Orientation Aid PTZ ACAP to version 1.4.1.

9.60.1:F10
Added NTP synchronization status to VAPIX Time API.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275

AXIS Q6074-E, version 9.60.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Updated Motion guard to version 2.2.2.

9.60.1:F7
Updated Fence guard to version 2.2.2.

9.60.1:F8
Updated loitering guard to version 2.2.2.

9.60.1:F9
Updated Orientation Aid PTZ ACAP to version 1.4.1.

9.60.1:F10
Added NTP synchronization status to VAPIX Time API.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275

AXIS Q6074, version 9.60.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Updated Motion guard to version 2.2.2.

9.60.1:F7
Updated Fence guard to version 2.2.2.

9.60.1:F8
Updated loitering guard to version 2.2.2.

9.60.1:F9
Updated Orientation Aid PTZ ACAP to version 1.4.1.

9.60.1:F10
Added NTP synchronization status to VAPIX Time API.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275

AXIS P5655-E, version 9.60.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Added NTP synchronization status to VAPIX Time API.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275

AXIS P1435-LE, version 9.60.1

$
0
0
This firmware is now available. Please visit the product's support page on www.axis.com for the download, full release notes and installation instructions.

New features in 9.60.1
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Added NTP synchronization status to VAPIX Time API.


Corrections in 9.60.1
================================================================================

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities:
CVE-2019-13377
CVE-2019-16275

Viewing all 9484 articles
Browse latest View live